SV-JME is indexed / abstracted in:

  • SCI-Expanded,
  • Compendex,
  • Inspec,
  • ProQuest-CSA,
  • SCOPUS,
  • TEMA, ...
The list of the remaining bases, in which SV-JME is indexed »

Founders and Publishers

University of Ljubljana, Faculty of Mechanical Engineering

University of Maribor, Faculty of Mechanical Engineering

 

Association of Mechanical Engineers of Slovenia

 

Chamber of Commerce and Industry Slovenia, Metal Processing Association

Editorial Office

University of Ljubljana
Faculty of Mechanical Engineering
Journal of Mechanical Engineering
Aškerčeva 6,

SI-1000 Ljubljana
Slovenia

P: +386 1 4771 137
E: info@sv-jme.eu


The magazine is subsidized by the Slovenian Research Agency (ARRS).

 

Journal of Mechanical Engineering - Volume 2006


   

Journal of Mechanical Engineering 52 (2006) 12

Table of contents

  1. Snap-through of the System for a Shallow Axially symmetric Bimetallic Shell using Non-linear Theory
  2. Sampling Design for Water Distribution System Models by Genetic Algorithms
  3. Analysis of the Operation of Pilot-Stage Piezo-Actuator Valves
  4. Programmable Logic Controllers Based on the Algebraic Riccati Equation Solution
  5. Experimental Study of the Effects of Different Exhaust Gas Recirculation Ratios on the Flame Temperature and Soot Formation when Using Diesel Fuels With Different T90 Distillation Temperatures

To journal contents >>
   
 

Journal of Mechanical Engineering 52 (2006) 11

Table of contents

  1. High-Speed Cutting of Soft Materials
  2. Evaluation of the Stability During Hard Turning
  3. Laser-Sintered Tools for the Die-casting of Aluminum
  4. Calibration and Checking the Geometrical Accuracy of a CNC Machine-Tool
  5. Development of a Neural-Networks Tool-Wear Monitoring System for a Turning Process

To journal contents >>
   
 

Journal of Mechanical Engineering 52 (2006) 10

Table of contents

  1. An Adaptive System for Cooling Injection-Moulding Moulds Via Thermoelectric Modules
  2. Some Possibilities for Determining Cutting Data when using Laser Cutting
  3. The Dynamic Behavior of a Turbine Rotating System
  4. A Method for Investigating the Nonlinear Bends of the Cylinders of a Web Offset Printing Station
  5. An Energy Analysis of Rapeseed Production for Biodiesel in Croatia

To journal contents >>
   

Journal of Mechanical Engineering 52 (2006) 9

Table of contents

  1. The Strength of as Cast Iron and Normalized Cast Iron Subjected to Cyclic Loading
  2. The Connection Between the Climate Change Model and a Building's Thermal Response Model: A Case of Slovenia
  3. A Variational Approach to the Establishment of a Lubrication Equation for a Non-Newtonian Thin Film
  4. The Universal Grey Transfer Matrix Method and Its Application in Calculating the Natural Frequencies of Systems
  5. Development of the Generic Structure and Programming Modules of an Elementary Work System for Distributed Printing
  6. Producing Polytetrafluorethylene Membranes and Laminating Them on Textile Backings

To journal contents >>
   

Journal of Mechanical Engineering 52 (2006)7-8

Table of contents

  1. Using Neural Networks to Follow the Wear of a S390 Twist Drill
  2. The Effect of Pressure Fluctuations on the Cutting Ability of Pure Water Jet
  3. Heat Generation During Abrasive Water-Jet Osteotomies Measured by Thermocouples
  4. Hybrid Dry-Ice Blasting Laser Processing: Nd-YAG-Laser-assisted Dry-Ice Blasting for De-Coating
  5. Cutting Performance and Obtainable Quality when Applying 6000-Bar Abrasive Water-Jets
  6. Investigation and Development of a Fiber-Optic Vibrometer for Use in Totally Implantable Hearing Aids
  7. Implementation of Information Technology for the Purpose of Quality Management System Improvement
  8. Mechanical Micro-Machining Using Milling, Wire EDM, Die-Sinking EDM and Diamond Turning
  9. Microforming – Current Status and Future Demands
  10. Integrated Design of Mycro-Electro-Mechanical Systems
  11. The Twelve “Death Signs” for a Growing Manufacturing Company
  12. The Role of Virtual Networks in a Virtual Enterprise
  13. An Introduction to the Diagnosis of the Delamination Process for Glass/Epoxy Composites During High-Pressure Abrasive Water-Jet Cutting
  14. Characterization of a Pure Water-Jet Cleaning Process – Process Simulation
  15. The Constructive and Geometrical Optimization of the Junctions in Structures Made from Laminated Composite Materials

To journal contents >>
   

Journal of Mechanical Engineering 52 (2006) 6

Table of contents

  1. Modelling of the Stratified Atmosphere in a Nuclear Power Plant Experimental Facility with a Lumped-Parameter Description
  2. An Analysis of the Influence of Pedestrians’ Traffic Flow on the Capacity of a Roundabout Using the Discrete Simulation Method
  3. Model of an Accident-Induced Fire around a Nuclear Power Plant
  4. The Application of an Atypical Neural Network when Quantifying the Modeling of Environmental Aspects
  5. The Estimated Influence of the Input Parameters in the analysis of the PTS in the Core of the PWR Krško NPP in the Case of the SB LOCA
  6. An Accuracy Assessment of Satellite Navigation in Natural-Resource Management

To journal contents >>
   

Journal of Mechanical Engineering 52 (2006) 5

Table of contents

  1. The Design and Optimization of Automated Storage and Retrieval Systems
  2. Simulation of a Reactor Cavity Steam Explosion with a General Purpose Computational Fluid Dynamics Code
  3. A Symbolic-Numeric Vibrations Analysis of Systems with Many Degrees of Freedom
  4. Correction Coefficients for Calculating the Young’s Modulus from the Resonant Flexural Vibration
  5. Theoretical and Experimental Foundations for the Manufacturing of Mechanical Insulation Foams

To journal contents >>
   

Journal of Mechanical Engineering 52 (2006) 4

Table of contents

  1. Performance Measurement in Business Process Re-Engineering
  2. A Damper of Torsional Vibrations and an Investigation of Its Efficiency
  3. Choice of Smoothing Parameter Using Photo-Elastic Coatings
  4. Managing the Functional Obsolescence of Machinery and Equipment: the Quotient of Curability of Functional Obsolescence as a Basis for Decisions Made about the Renovation or Replacement of Machinery and Equipment
  5. Using Porous Ceramics as a Substrate or Filter Media During the Cleaning of Sewage

To journal contents >>
   

Journal of Mechanical Engineering 52 (2006) 3

Table of contents

  1. Simulation of the Phebus FPT1 Severe Accident Experiment with the MELCOR Computer Code
  2. Deformation Analysis of Boring Bars Using Analytical and Finite Element Approaches
  3. Implementation of a System for the Automatic End-Quality Assessment of Vacuum-Cleaner Motors
  4. Using Spline Functions to Smooth Discrete Data
  5. Regional Aspects of Innovation as a Cornerstone of the Competitiveness of a Company within the State and the EU

To journal contents >>
   

Journal of Mechanical Engineering 52 (2006) 2

Table of contents

  1. Thermo-Mechanical Modelling of Stochastic Stress-Strain States
  2. Computational Modelling of Fuel Motion and Its Interaction with the Reservoir Structure
  3. Simulating the Impact of a Truck on a Road-Safety Barrier
  4. Vibro-Acoustic Modelling of an Alternator
  5. Modeling and analyzing the dynamics of an electric-motor brush

To journal contents >>
   
 

Journal of Mechanical Engineering 52 (2006) 1

Table of contents

  1. The Influence of Biodiesel Fuel on the Injection, Combustion, Emissions and Performance of a Direct-Injected Diesel Engine
  2. A Novel Algorithm for the Simulation of an Automotive Turbocharger Turbine
  3. Measuring a Driver’s Reaction Time
  4. The Difference Between a Front-Axle Stress Calculation Using the Finite-Element Method and the Same Calculation According to DIN743
  5. The Effects of Different Analysis Parameters on the Calculated Temperature of a Loaded Headlamp

To journal contents >>
   

Journal of Mechanical Engineering

in digital form



SV-JME-6-2010» SV-JME-5-2010» SV-JME-4-2010» SV-JME-3-2010»  

 

 


Sign up for the FREE SV-JME Newsletter

Enter your email address below to receive your newsletter subscriptions.
Name and surname:

E-mail:
Subscribe
Unsubscribe