JERMAN, Marko ;VALENTINČIČ, Joško ;LEBAR, Andrej ;ORBANIĆ, Henri .
The Study of Abrasive Water Jet Cutting Front Development using a Two-Dimensional Cellular Automata Model.
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 61, n.5, p. 292-302, june 2018.
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/the-study-of-abrasive-water-jet-cutting-front-development-using-a-two-dimensional-cellular-automata-model/>. Date accessed: 25 jan. 2026.
doi:http://dx.doi.org/10.5545/sv-jme.2014.2179.
Jerman, M., Valentinčič, J., Lebar, A., & Orbanić, H.
(2015).
The Study of Abrasive Water Jet Cutting Front Development using a Two-Dimensional Cellular Automata Model.
Strojniški vestnik - Journal of Mechanical Engineering, 61(5), 292-302.
doi:http://dx.doi.org/10.5545/sv-jme.2014.2179
@article{sv-jmesv-jme.2014.2179,
author = {Marko Jerman and Joško Valentinčič and Andrej Lebar and Henri Orbanić},
title = {The Study of Abrasive Water Jet Cutting Front Development using a Two-Dimensional Cellular Automata Model},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {61},
number = {5},
year = {2015},
keywords = {abrasive water jet; cutting front; surface quality; cellular automata; simulation},
abstract = {In this paper, the cutting front development during abrasive water jet (AWJ) cutting is studied using a two-dimensional cellular automata (CA) model, hence the striation formation phenomenon is studied indirectly. To calculate the shape of the cutting front, the CA model uses the following inputs: cutting velocity, AWJ intensity and material type. The cutting process is described by simplified material removal and AWJ propagation models in the form of CA rules. The rules encompass AWJ ability to erode the workpiece material and, inversely, the workpiece material’s resistance to the erosion process. The proposed CA model is validated by checking the trend of the cutting front development at various input parameters. The simulation results are in good agreement with experimentally obtained trends and thus confirm the proper setup of CA rules. This gives a better insight into the AWJ cutting mechanism.},
issn = {0039-2480}, pages = {292-302}, doi = {10.5545/sv-jme.2014.2179},
url = {https://www.sv-jme.eu/sl/article/the-study-of-abrasive-water-jet-cutting-front-development-using-a-two-dimensional-cellular-automata-model/}
}
Jerman, M.,Valentinčič, J.,Lebar, A.,Orbanić, H.
2015 June 61. The Study of Abrasive Water Jet Cutting Front Development using a Two-Dimensional Cellular Automata Model. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 61:5
%A Jerman, Marko
%A Valentinčič, Joško
%A Lebar, Andrej
%A Orbanić, Henri
%D 2015
%T The Study of Abrasive Water Jet Cutting Front Development using a Two-Dimensional Cellular Automata Model
%B 2015
%9 abrasive water jet; cutting front; surface quality; cellular automata; simulation
%! The Study of Abrasive Water Jet Cutting Front Development using a Two-Dimensional Cellular Automata Model
%K abrasive water jet; cutting front; surface quality; cellular automata; simulation
%X In this paper, the cutting front development during abrasive water jet (AWJ) cutting is studied using a two-dimensional cellular automata (CA) model, hence the striation formation phenomenon is studied indirectly. To calculate the shape of the cutting front, the CA model uses the following inputs: cutting velocity, AWJ intensity and material type. The cutting process is described by simplified material removal and AWJ propagation models in the form of CA rules. The rules encompass AWJ ability to erode the workpiece material and, inversely, the workpiece material’s resistance to the erosion process. The proposed CA model is validated by checking the trend of the cutting front development at various input parameters. The simulation results are in good agreement with experimentally obtained trends and thus confirm the proper setup of CA rules. This gives a better insight into the AWJ cutting mechanism.
%U https://www.sv-jme.eu/sl/article/the-study-of-abrasive-water-jet-cutting-front-development-using-a-two-dimensional-cellular-automata-model/
%0 Journal Article
%R 10.5545/sv-jme.2014.2179
%& 292
%P 11
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 61
%N 5
%@ 0039-2480
%8 2018-06-27
%7 2018-06-27
Jerman, Marko, Joško Valentinčič, Andrej Lebar, & Henri Orbanić.
"The Study of Abrasive Water Jet Cutting Front Development using a Two-Dimensional Cellular Automata Model." Strojniški vestnik - Journal of Mechanical Engineering [Online], 61.5 (2015): 292-302. Web. 25 Jan. 2026
TY - JOUR
AU - Jerman, Marko
AU - Valentinčič, Joško
AU - Lebar, Andrej
AU - Orbanić, Henri
PY - 2015
TI - The Study of Abrasive Water Jet Cutting Front Development using a Two-Dimensional Cellular Automata Model
JF - Strojniški vestnik - Journal of Mechanical Engineering
DO - 10.5545/sv-jme.2014.2179
KW - abrasive water jet; cutting front; surface quality; cellular automata; simulation
N2 - In this paper, the cutting front development during abrasive water jet (AWJ) cutting is studied using a two-dimensional cellular automata (CA) model, hence the striation formation phenomenon is studied indirectly. To calculate the shape of the cutting front, the CA model uses the following inputs: cutting velocity, AWJ intensity and material type. The cutting process is described by simplified material removal and AWJ propagation models in the form of CA rules. The rules encompass AWJ ability to erode the workpiece material and, inversely, the workpiece material’s resistance to the erosion process. The proposed CA model is validated by checking the trend of the cutting front development at various input parameters. The simulation results are in good agreement with experimentally obtained trends and thus confirm the proper setup of CA rules. This gives a better insight into the AWJ cutting mechanism.
UR - https://www.sv-jme.eu/sl/article/the-study-of-abrasive-water-jet-cutting-front-development-using-a-two-dimensional-cellular-automata-model/
@article{{sv-jme}{sv-jme.2014.2179},
author = {Jerman, M., Valentinčič, J., Lebar, A., Orbanić, H.},
title = {The Study of Abrasive Water Jet Cutting Front Development using a Two-Dimensional Cellular Automata Model},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {61},
number = {5},
year = {2015},
doi = {10.5545/sv-jme.2014.2179},
url = {https://www.sv-jme.eu/sl/article/the-study-of-abrasive-water-jet-cutting-front-development-using-a-two-dimensional-cellular-automata-model/}
}
TY - JOUR
AU - Jerman, Marko
AU - Valentinčič, Joško
AU - Lebar, Andrej
AU - Orbanić, Henri
PY - 2018/06/27
TI - The Study of Abrasive Water Jet Cutting Front Development using a Two-Dimensional Cellular Automata Model
JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 61, No 5 (2015): Strojniški vestnik - Journal of Mechanical Engineering
DO - 10.5545/sv-jme.2014.2179
KW - abrasive water jet, cutting front, surface quality, cellular automata, simulation
N2 - In this paper, the cutting front development during abrasive water jet (AWJ) cutting is studied using a two-dimensional cellular automata (CA) model, hence the striation formation phenomenon is studied indirectly. To calculate the shape of the cutting front, the CA model uses the following inputs: cutting velocity, AWJ intensity and material type. The cutting process is described by simplified material removal and AWJ propagation models in the form of CA rules. The rules encompass AWJ ability to erode the workpiece material and, inversely, the workpiece material’s resistance to the erosion process. The proposed CA model is validated by checking the trend of the cutting front development at various input parameters. The simulation results are in good agreement with experimentally obtained trends and thus confirm the proper setup of CA rules. This gives a better insight into the AWJ cutting mechanism.
UR - https://www.sv-jme.eu/sl/article/the-study-of-abrasive-water-jet-cutting-front-development-using-a-two-dimensional-cellular-automata-model/
Jerman, Marko, Valentinčič, Joško, Lebar, Andrej, AND Orbanić, Henri.
"The Study of Abrasive Water Jet Cutting Front Development using a Two-Dimensional Cellular Automata Model" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 61 Number 5 (27 June 2018)
