Analysis of Die Casting Tool Material

MUHIČ, Mitja ;TUŠEK, Janez ;KOSEL, Franc ;KLOBUČAR, Damjan .
Analysis of Die Casting Tool Material. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 56, n.6, p. 351-356, october 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/analysis-of-die-casting-tool-material/>. Date accessed: 30 jan. 2026. 
doi:http://dx.doi.org/.

Muhič, M., Tušek, J., Kosel, F., & Klobučar, D.
(2010).
Analysis of Die Casting Tool Material.
Strojniški vestnik - Journal of Mechanical Engineering, 56(6), 351-356.
doi:http://dx.doi.org/

@article{.,
	author = {Mitja  Muhič and Janez  Tušek and Franc  Kosel and Damjan  Klobučar},
	title = {Analysis of Die Casting Tool Material},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {56},
	number = {6},
	year = {2010},
	keywords = {die casting; die effect; thermal fatigue; surface crack; },
	abstract = {This paper deals with defects produced in aluminium alloy die casting dies during die operation. The most frequent defect is thermal fatigue cracking. Hardness and toughness is measured on specimens cut from different parts of used die casting die.The results show a significant difference in material microstructure and hardness between the surface and the core. The intense martensite tempering is observed on the die surface, while the core material microstructure remains unchanged. A considerable hardness drop is measured on the material surface and no change is observed in the depth of six millimetres from surface.},
	issn = {0039-2480},	pages = {351-356},	doi = {},
	url = {https://www.sv-jme.eu/sl/article/analysis-of-die-casting-tool-material/}
}

Muhič, M.,Tušek, J.,Kosel, F.,Klobučar, D.
2010 October 56. Analysis of Die Casting Tool Material. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 56:6

%A Muhič, Mitja 
%A Tušek, Janez 
%A Kosel, Franc 
%A Klobučar, Damjan 
%D 2010
%T Analysis of Die Casting Tool Material
%B 2010
%9 die casting; die effect; thermal fatigue; surface crack; 
%! Analysis of Die Casting Tool Material
%K die casting; die effect; thermal fatigue; surface crack; 
%X This paper deals with defects produced in aluminium alloy die casting dies during die operation. The most frequent defect is thermal fatigue cracking. Hardness and toughness is measured on specimens cut from different parts of used die casting die.The results show a significant difference in material microstructure and hardness between the surface and the core. The intense martensite tempering is observed on the die surface, while the core material microstructure remains unchanged. A considerable hardness drop is measured on the material surface and no change is observed in the depth of six millimetres from surface.
%U https://www.sv-jme.eu/sl/article/analysis-of-die-casting-tool-material/
%0 Journal Article
%R 
%& 351
%P 6
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 56
%N 6
%@ 0039-2480
%8 2017-10-24
%7 2017-10-24

Muhič, Mitja, Janez  Tušek, Franc  Kosel, & Damjan  Klobučar.
"Analysis of Die Casting Tool Material." Strojniški vestnik - Journal of Mechanical Engineering [Online], 56.6 (2010): 351-356. Web.  30 Jan. 2026

TY  - JOUR
AU  - Muhič, Mitja 
AU  - Tušek, Janez 
AU  - Kosel, Franc 
AU  - Klobučar, Damjan 
PY  - 2010
TI  - Analysis of Die Casting Tool Material
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - die casting; die effect; thermal fatigue; surface crack; 
N2  - This paper deals with defects produced in aluminium alloy die casting dies during die operation. The most frequent defect is thermal fatigue cracking. Hardness and toughness is measured on specimens cut from different parts of used die casting die.The results show a significant difference in material microstructure and hardness between the surface and the core. The intense martensite tempering is observed on the die surface, while the core material microstructure remains unchanged. A considerable hardness drop is measured on the material surface and no change is observed in the depth of six millimetres from surface.
UR  - https://www.sv-jme.eu/sl/article/analysis-of-die-casting-tool-material/

@article{{}{.},
	author = {Muhič, M., Tušek, J., Kosel, F., Klobučar, D.},
	title = {Analysis of Die Casting Tool Material},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {56},
	number = {6},
	year = {2010},
	doi = {},
	url = {https://www.sv-jme.eu/sl/article/analysis-of-die-casting-tool-material/}
}

TY  - JOUR
AU  - Muhič, Mitja 
AU  - Tušek, Janez 
AU  - Kosel, Franc 
AU  - Klobučar, Damjan 
PY  - 2017/10/24
TI  - Analysis of Die Casting Tool Material
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 56, No 6 (2010): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - die casting, die effect, thermal fatigue, surface crack, 
N2  - This paper deals with defects produced in aluminium alloy die casting dies during die operation. The most frequent defect is thermal fatigue cracking. Hardness and toughness is measured on specimens cut from different parts of used die casting die.The results show a significant difference in material microstructure and hardness between the surface and the core. The intense martensite tempering is observed on the die surface, while the core material microstructure remains unchanged. A considerable hardness drop is measured on the material surface and no change is observed in the depth of six millimetres from surface.
UR  - https://www.sv-jme.eu/sl/article/analysis-of-die-casting-tool-material/

Muhič, Mitja, Tušek, Janez, Kosel, Franc, AND Klobučar, Damjan.
"Analysis of Die Casting Tool Material" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 56 Number 6 (24 October 2017)