Cutting-Tool Wear during High-Speed Cutting

KOPAČ, Janez .
Cutting-Tool Wear during High-Speed Cutting. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 50, n.4, p. 195-205, july 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/cutting-tool-wear-during-high-speed-cutting/>. Date accessed: 03 feb. 2026. 
doi:http://dx.doi.org/.

Kopač, J.
(2004).
Cutting-Tool Wear during High-Speed Cutting.
Strojniški vestnik - Journal of Mechanical Engineering, 50(4), 195-205.
doi:http://dx.doi.org/

@article{.,
	author = {Janez  Kopač},
	title = {Cutting-Tool Wear during High-Speed Cutting},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {50},
	number = {4},
	year = {2004},
	keywords = {high speed cutting; cutting tools; tool wear; cutting tool materials; },
	abstract = {Machining by cutting is strongly connected with wear on the tool’s edge. The cutting-tool materials, the machined material, and the machining parameters have a direct influence on the tool’s wear grade and, of course, on the tool life. High speed machining (HSM) involves high cutting speeds, so that the classical, well-known principle S of tool-wear growth does not exist as before. There are some unpredictable matters.},
	issn = {0039-2480},	pages = {195-205},	doi = {},
	url = {https://www.sv-jme.eu/sl/article/cutting-tool-wear-during-high-speed-cutting/}
}

Kopač, J.
2004 July 50. Cutting-Tool Wear during High-Speed Cutting. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 50:4

%A Kopač, Janez 
%D 2004
%T Cutting-Tool Wear during High-Speed Cutting
%B 2004
%9 high speed cutting; cutting tools; tool wear; cutting tool materials; 
%! Cutting-Tool Wear during High-Speed Cutting
%K high speed cutting; cutting tools; tool wear; cutting tool materials; 
%X Machining by cutting is strongly connected with wear on the tool’s edge. The cutting-tool materials, the machined material, and the machining parameters have a direct influence on the tool’s wear grade and, of course, on the tool life. High speed machining (HSM) involves high cutting speeds, so that the classical, well-known principle S of tool-wear growth does not exist as before. There are some unpredictable matters.
%U https://www.sv-jme.eu/sl/article/cutting-tool-wear-during-high-speed-cutting/
%0 Journal Article
%R 
%& 195
%P 11
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 50
%N 4
%@ 0039-2480
%8 2017-07-07
%7 2017-07-07

Kopač, Janez.
"Cutting-Tool Wear during High-Speed Cutting." Strojniški vestnik - Journal of Mechanical Engineering [Online], 50.4 (2004): 195-205. Web.  03 Feb. 2026

TY  - JOUR
AU  - Kopač, Janez 
PY  - 2004
TI  - Cutting-Tool Wear during High-Speed Cutting
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - high speed cutting; cutting tools; tool wear; cutting tool materials; 
N2  - Machining by cutting is strongly connected with wear on the tool’s edge. The cutting-tool materials, the machined material, and the machining parameters have a direct influence on the tool’s wear grade and, of course, on the tool life. High speed machining (HSM) involves high cutting speeds, so that the classical, well-known principle S of tool-wear growth does not exist as before. There are some unpredictable matters.
UR  - https://www.sv-jme.eu/sl/article/cutting-tool-wear-during-high-speed-cutting/

@article{{}{.},
	author = {Kopač, J.},
	title = {Cutting-Tool Wear during High-Speed Cutting},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {50},
	number = {4},
	year = {2004},
	doi = {},
	url = {https://www.sv-jme.eu/sl/article/cutting-tool-wear-during-high-speed-cutting/}
}

TY  - JOUR
AU  - Kopač, Janez 
PY  - 2017/07/07
TI  - Cutting-Tool Wear during High-Speed Cutting
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 50, No 4 (2004): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - high speed cutting, cutting tools, tool wear, cutting tool materials, 
N2  - Machining by cutting is strongly connected with wear on the tool’s edge. The cutting-tool materials, the machined material, and the machining parameters have a direct influence on the tool’s wear grade and, of course, on the tool life. High speed machining (HSM) involves high cutting speeds, so that the classical, well-known principle S of tool-wear growth does not exist as before. There are some unpredictable matters.
UR  - https://www.sv-jme.eu/sl/article/cutting-tool-wear-during-high-speed-cutting/

Kopač, Janez"Cutting-Tool Wear during High-Speed Cutting" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 50 Number 4 (07 July 2017)