A Gage Study Applied in Shear Test to Identify Variation Causes from a Resistance Spot Welding Measurement System

2781 Ogledov
3207 Prenosov
Izvoz citacije: ABNT
ALMEIDA, Fabrício Alves de;GOMES, Guilherme Ferreira;SABIONI, Rachel Campos;GOMES, José Henrique de Freitas;DE PAULA, Vinícius Renó;DE PAIVA, Anderson Paulo;DA COSTA, Sebastião Carlos.
A Gage Study Applied in Shear Test to Identify Variation Causes from a Resistance Spot Welding Measurement System. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 64, n.10, p. 621-631, september 2018. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/a-gage-study-applied-in-shear-test-to-identify-variation-causes-from-a-resistance-spot-welding-measure-system/>. Date accessed: 28 mar. 2024. 
doi:http://dx.doi.org/10.5545/sv-jme.2018.5235.
Almeida, F., Gomes, G., Sabioni, R., Gomes, J., de Paula, V., de Paiva, A., & da Costa, S.
(2018).
A Gage Study Applied in Shear Test to Identify Variation Causes from a Resistance Spot Welding Measurement System.
Strojniški vestnik - Journal of Mechanical Engineering, 64(10), 621-631.
doi:http://dx.doi.org/10.5545/sv-jme.2018.5235
@article{sv-jmesv-jme.2018.5235,
	author = {Fabrício Alves de Almeida and Guilherme Ferreira Gomes and Rachel Campos Sabioni and José Henrique de Freitas Gomes and Vinícius Renó de Paula and Anderson Paulo de Paiva and Sebastião Carlos da Costa},
	title = {A Gage Study Applied in Shear Test to Identify Variation Causes from a Resistance Spot Welding Measurement System},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {64},
	number = {10},
	year = {2018},
	keywords = {spot welding; measurement system analysis; shear test; GR&R; ANOVA.},
	abstract = {Resistance welding processes, especially spot welding, have wide applicability in the industry, especially in the automotive sector, due to its fast execution and the non-use of consumables. In addition, the search for quality improvement of the final product is incessant and, in a capable process, there should be no error related to the measurements. In this study, the NGR&R was used by the ANOVA method to identify the variation components of the measurement system in the shear test for two quality characteristics: tensile-shear strength and ultimate strain. The experiments were conducted on a hot dip galvanized steel by using design of experiments to select the parts in order to represent the real amplitude of the process. From the results it was possible to verify that one of the destructive test machines used in this study has a strong variability, evidencing that some adjustments and improvements are necessary in the coupling of the specimens for steels with coating layers (such as galvanized steel, which has a layer of zinc).},
	issn = {0039-2480},	pages = {621-631},	doi = {10.5545/sv-jme.2018.5235},
	url = {https://www.sv-jme.eu/sl/article/a-gage-study-applied-in-shear-test-to-identify-variation-causes-from-a-resistance-spot-welding-measure-system/}
}
Almeida, F.,Gomes, G.,Sabioni, R.,Gomes, J.,de Paula, V.,de Paiva, A.,da Costa, S.
2018 September 64. A Gage Study Applied in Shear Test to Identify Variation Causes from a Resistance Spot Welding Measurement System. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 64:10
%A Almeida, Fabrício Alves de
%A Gomes, Guilherme Ferreira
%A Sabioni, Rachel Campos
%A Gomes, José Henrique de Freitas
%A de Paula, Vinícius Renó
%A de Paiva, Anderson Paulo
%A da Costa, Sebastião Carlos
%D 2018
%T A Gage Study Applied in Shear Test to Identify Variation Causes from a Resistance Spot Welding Measurement System
%B 2018
%9 spot welding; measurement system analysis; shear test; GR&R; ANOVA.
%! A Gage Study Applied in Shear Test to Identify Variation Causes from a Resistance Spot Welding Measurement System
%K spot welding; measurement system analysis; shear test; GR&R; ANOVA.
%X Resistance welding processes, especially spot welding, have wide applicability in the industry, especially in the automotive sector, due to its fast execution and the non-use of consumables. In addition, the search for quality improvement of the final product is incessant and, in a capable process, there should be no error related to the measurements. In this study, the NGR&R was used by the ANOVA method to identify the variation components of the measurement system in the shear test for two quality characteristics: tensile-shear strength and ultimate strain. The experiments were conducted on a hot dip galvanized steel by using design of experiments to select the parts in order to represent the real amplitude of the process. From the results it was possible to verify that one of the destructive test machines used in this study has a strong variability, evidencing that some adjustments and improvements are necessary in the coupling of the specimens for steels with coating layers (such as galvanized steel, which has a layer of zinc).
%U https://www.sv-jme.eu/sl/article/a-gage-study-applied-in-shear-test-to-identify-variation-causes-from-a-resistance-spot-welding-measure-system/
%0 Journal Article
%R 10.5545/sv-jme.2018.5235
%& 621
%P 11
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 64
%N 10
%@ 0039-2480
%8 2018-09-21
%7 2018-09-21
Almeida, Fabrício, Guilherme Ferreira Gomes, Rachel Campos Sabioni, José Henrique de Freitas Gomes, Vinícius Renó de Paula, Anderson Paulo de Paiva, & Sebastião Carlos da Costa.
"A Gage Study Applied in Shear Test to Identify Variation Causes from a Resistance Spot Welding Measurement System." Strojniški vestnik - Journal of Mechanical Engineering [Online], 64.10 (2018): 621-631. Web.  28 Mar. 2024
TY  - JOUR
AU  - Almeida, Fabrício Alves de
AU  - Gomes, Guilherme Ferreira
AU  - Sabioni, Rachel Campos
AU  - Gomes, José Henrique de Freitas
AU  - de Paula, Vinícius Renó
AU  - de Paiva, Anderson Paulo
AU  - da Costa, Sebastião Carlos
PY  - 2018
TI  - A Gage Study Applied in Shear Test to Identify Variation Causes from a Resistance Spot Welding Measurement System
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2018.5235
KW  - spot welding; measurement system analysis; shear test; GR&R; ANOVA.
N2  - Resistance welding processes, especially spot welding, have wide applicability in the industry, especially in the automotive sector, due to its fast execution and the non-use of consumables. In addition, the search for quality improvement of the final product is incessant and, in a capable process, there should be no error related to the measurements. In this study, the NGR&R was used by the ANOVA method to identify the variation components of the measurement system in the shear test for two quality characteristics: tensile-shear strength and ultimate strain. The experiments were conducted on a hot dip galvanized steel by using design of experiments to select the parts in order to represent the real amplitude of the process. From the results it was possible to verify that one of the destructive test machines used in this study has a strong variability, evidencing that some adjustments and improvements are necessary in the coupling of the specimens for steels with coating layers (such as galvanized steel, which has a layer of zinc).
UR  - https://www.sv-jme.eu/sl/article/a-gage-study-applied-in-shear-test-to-identify-variation-causes-from-a-resistance-spot-welding-measure-system/
@article{{sv-jme}{sv-jme.2018.5235},
	author = {Almeida, F., Gomes, G., Sabioni, R., Gomes, J., de Paula, V., de Paiva, A., da Costa, S.},
	title = {A Gage Study Applied in Shear Test to Identify Variation Causes from a Resistance Spot Welding Measurement System},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {64},
	number = {10},
	year = {2018},
	doi = {10.5545/sv-jme.2018.5235},
	url = {https://www.sv-jme.eu/sl/article/a-gage-study-applied-in-shear-test-to-identify-variation-causes-from-a-resistance-spot-welding-measure-system/}
}
TY  - JOUR
AU  - Almeida, Fabrício Alves de
AU  - Gomes, Guilherme Ferreira
AU  - Sabioni, Rachel Campos
AU  - Gomes, José Henrique de Freitas
AU  - de Paula, Vinícius Renó
AU  - de Paiva, Anderson Paulo
AU  - da Costa, Sebastião Carlos
PY  - 2018/09/21
TI  - A Gage Study Applied in Shear Test to Identify Variation Causes from a Resistance Spot Welding Measurement System
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 64, No 10 (2018): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2018.5235
KW  - spot welding, measurement system analysis, shear test, GR&R, ANOVA.
N2  - Resistance welding processes, especially spot welding, have wide applicability in the industry, especially in the automotive sector, due to its fast execution and the non-use of consumables. In addition, the search for quality improvement of the final product is incessant and, in a capable process, there should be no error related to the measurements. In this study, the NGR&R was used by the ANOVA method to identify the variation components of the measurement system in the shear test for two quality characteristics: tensile-shear strength and ultimate strain. The experiments were conducted on a hot dip galvanized steel by using design of experiments to select the parts in order to represent the real amplitude of the process. From the results it was possible to verify that one of the destructive test machines used in this study has a strong variability, evidencing that some adjustments and improvements are necessary in the coupling of the specimens for steels with coating layers (such as galvanized steel, which has a layer of zinc).
UR  - https://www.sv-jme.eu/sl/article/a-gage-study-applied-in-shear-test-to-identify-variation-causes-from-a-resistance-spot-welding-measure-system/
Almeida, Fabrício, Gomes, Guilherme, Sabioni, Rachel, Gomes, José Henrique, de Paula, Vinícius, de Paiva, Anderson, AND da Costa, Sebastião.
"A Gage Study Applied in Shear Test to Identify Variation Causes from a Resistance Spot Welding Measurement System" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 64 Number 10 (21 September 2018)

Avtorji

Inštitucije

  • Federal University of Itajubá, Institute of Industrial Engineering and Management, Brazil 1
  • Federal University of Itajubá, Mechanical Engineering Institute, Brazil 2
  • Sorbonne Universities, Compiègne University of Technology, Department of Mechanical Engineering, France 3

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 64(2018)10, 621-631
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

https://doi.org/10.5545/sv-jme.2018.5235

Resistance welding processes, especially spot welding, have wide applicability in the industry, especially in the automotive sector, due to its fast execution and the non-use of consumables. In addition, the search for quality improvement of the final product is incessant and, in a capable process, there should be no error related to the measurements. In this study, the NGR&R was used by the ANOVA method to identify the variation components of the measurement system in the shear test for two quality characteristics: tensile-shear strength and ultimate strain. The experiments were conducted on a hot dip galvanized steel by using design of experiments to select the parts in order to represent the real amplitude of the process. From the results it was possible to verify that one of the destructive test machines used in this study has a strong variability, evidencing that some adjustments and improvements are necessary in the coupling of the specimens for steels with coating layers (such as galvanized steel, which has a layer of zinc).

spot welding; measurement system analysis; shear test; GR&R; ANOVA.