A Heat-Transfer Analysis of the Ferrite Sintering Process

1838 Ogledov
520 Prenosov
Izvoz citacije: ABNT
REK, Zlatko ;PERPAR, Matjaž ;ŽUN, Iztok .
A Heat-Transfer Analysis of the Ferrite Sintering Process. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 48, n.9, p. 472-481, july 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/a-heat-transfer-analysis-of-the-ferrite-sintering-process/>. Date accessed: 15 oct. 2024. 
doi:http://dx.doi.org/.
Rek, Z., Perpar, M., & Žun, I.
(2002).
A Heat-Transfer Analysis of the Ferrite Sintering Process.
Strojniški vestnik - Journal of Mechanical Engineering, 48(9), 472-481.
doi:http://dx.doi.org/
@article{.,
	author = {Zlatko  Rek and Matjaž  Perpar and Iztok  Žun},
	title = {A Heat-Transfer Analysis of the Ferrite Sintering Process},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {48},
	number = {9},
	year = {2002},
	keywords = {ferrite sintering; heat transfer; numerical simulations; radiation models; },
	abstract = {The paper deals with a heat-transfer analysis of the process of sintering ferrites in a furnace. Experimental measurements and a numerical simulation of the time development of the temperature field were performed. Due to the complexity of the problem the simulation had to be performed in two steps. The first step takes into consideration the whole furnace, while in the second step only a single ferrite plate is analyzed. The experiment, the numerical model (the heat-transfer equations) and the generation of the discretized model of the furnace for the chosen computational domain, e.g. furnaces with heaters, plates, ferrites, bearers and supports, are described. The results of the numerical simulation are analyzed and compared with experimental data. The agreement between the numerical results and the experimental data was good.},
	issn = {0039-2480},	pages = {472-481},	doi = {},
	url = {https://www.sv-jme.eu/sl/article/a-heat-transfer-analysis-of-the-ferrite-sintering-process/}
}
Rek, Z.,Perpar, M.,Žun, I.
2002 July 48. A Heat-Transfer Analysis of the Ferrite Sintering Process. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 48:9
%A Rek, Zlatko 
%A Perpar, Matjaž 
%A Žun, Iztok 
%D 2002
%T A Heat-Transfer Analysis of the Ferrite Sintering Process
%B 2002
%9 ferrite sintering; heat transfer; numerical simulations; radiation models; 
%! A Heat-Transfer Analysis of the Ferrite Sintering Process
%K ferrite sintering; heat transfer; numerical simulations; radiation models; 
%X The paper deals with a heat-transfer analysis of the process of sintering ferrites in a furnace. Experimental measurements and a numerical simulation of the time development of the temperature field were performed. Due to the complexity of the problem the simulation had to be performed in two steps. The first step takes into consideration the whole furnace, while in the second step only a single ferrite plate is analyzed. The experiment, the numerical model (the heat-transfer equations) and the generation of the discretized model of the furnace for the chosen computational domain, e.g. furnaces with heaters, plates, ferrites, bearers and supports, are described. The results of the numerical simulation are analyzed and compared with experimental data. The agreement between the numerical results and the experimental data was good.
%U https://www.sv-jme.eu/sl/article/a-heat-transfer-analysis-of-the-ferrite-sintering-process/
%0 Journal Article
%R 
%& 472
%P 10
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 48
%N 9
%@ 0039-2480
%8 2017-07-07
%7 2017-07-07
Rek, Zlatko, Matjaž  Perpar, & Iztok  Žun.
"A Heat-Transfer Analysis of the Ferrite Sintering Process." Strojniški vestnik - Journal of Mechanical Engineering [Online], 48.9 (2002): 472-481. Web.  15 Oct. 2024
TY  - JOUR
AU  - Rek, Zlatko 
AU  - Perpar, Matjaž 
AU  - Žun, Iztok 
PY  - 2002
TI  - A Heat-Transfer Analysis of the Ferrite Sintering Process
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - ferrite sintering; heat transfer; numerical simulations; radiation models; 
N2  - The paper deals with a heat-transfer analysis of the process of sintering ferrites in a furnace. Experimental measurements and a numerical simulation of the time development of the temperature field were performed. Due to the complexity of the problem the simulation had to be performed in two steps. The first step takes into consideration the whole furnace, while in the second step only a single ferrite plate is analyzed. The experiment, the numerical model (the heat-transfer equations) and the generation of the discretized model of the furnace for the chosen computational domain, e.g. furnaces with heaters, plates, ferrites, bearers and supports, are described. The results of the numerical simulation are analyzed and compared with experimental data. The agreement between the numerical results and the experimental data was good.
UR  - https://www.sv-jme.eu/sl/article/a-heat-transfer-analysis-of-the-ferrite-sintering-process/
@article{{}{.},
	author = {Rek, Z., Perpar, M., Žun, I.},
	title = {A Heat-Transfer Analysis of the Ferrite Sintering Process},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {48},
	number = {9},
	year = {2002},
	doi = {},
	url = {https://www.sv-jme.eu/sl/article/a-heat-transfer-analysis-of-the-ferrite-sintering-process/}
}
TY  - JOUR
AU  - Rek, Zlatko 
AU  - Perpar, Matjaž 
AU  - Žun, Iztok 
PY  - 2017/07/07
TI  - A Heat-Transfer Analysis of the Ferrite Sintering Process
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 48, No 9 (2002): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - ferrite sintering, heat transfer, numerical simulations, radiation models, 
N2  - The paper deals with a heat-transfer analysis of the process of sintering ferrites in a furnace. Experimental measurements and a numerical simulation of the time development of the temperature field were performed. Due to the complexity of the problem the simulation had to be performed in two steps. The first step takes into consideration the whole furnace, while in the second step only a single ferrite plate is analyzed. The experiment, the numerical model (the heat-transfer equations) and the generation of the discretized model of the furnace for the chosen computational domain, e.g. furnaces with heaters, plates, ferrites, bearers and supports, are described. The results of the numerical simulation are analyzed and compared with experimental data. The agreement between the numerical results and the experimental data was good.
UR  - https://www.sv-jme.eu/sl/article/a-heat-transfer-analysis-of-the-ferrite-sintering-process/
Rek, Zlatko, Perpar, Matjaž, AND Žun, Iztok.
"A Heat-Transfer Analysis of the Ferrite Sintering Process" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 48 Number 9 (07 July 2017)

Avtorji

Inštitucije

  • University of Ljubljana, Faculty of Mechanical Engineering, Laboratory for Fluid Dynamics and Thermodynamics, Ljubljana, Slovenia
  • University of Ljubljana, Faculty of Mechanical Engineering, Laboratory for Fluid Dynamics and Thermodynamics, Ljubljana, Slovenia
  • University of Ljubljana, Faculty of Mechanical Engineering, Laboratory for Fluid Dynamics and Thermodynamics, Ljubljana, Slovenia

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 48(2002)9, 472-481
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

The paper deals with a heat-transfer analysis of the process of sintering ferrites in a furnace. Experimental measurements and a numerical simulation of the time development of the temperature field were performed. Due to the complexity of the problem the simulation had to be performed in two steps. The first step takes into consideration the whole furnace, while in the second step only a single ferrite plate is analyzed. The experiment, the numerical model (the heat-transfer equations) and the generation of the discretized model of the furnace for the chosen computational domain, e.g. furnaces with heaters, plates, ferrites, bearers and supports, are described. The results of the numerical simulation are analyzed and compared with experimental data. The agreement between the numerical results and the experimental data was good.

ferrite sintering; heat transfer; numerical simulations; radiation models;