HANČIČ, Aleš ;KOSEL, Franc ;CAMPOS, A. R.;CUNHA, A. M.;GANTAR, Gašper . A model for predicting the mechanical properties of wood-plastic composites – A micro-mechanical approach. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 53, n.12, p. 819-833, august 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/a-model-for-predicting-the-mechanical-properties-of-wood-plastic-composites-a-micro-mechanical-approach/>. Date accessed: 25 apr. 2024. doi:http://dx.doi.org/.
Hančič, A., Kosel, F., Campos, A., Cunha, A., & Gantar, G. (2007). A model for predicting the mechanical properties of wood-plastic composites – A micro-mechanical approach. Strojniški vestnik - Journal of Mechanical Engineering, 53(12), 819-833. doi:http://dx.doi.org/
@article{.,
author = {Aleš Hančič and Franc Kosel and A. R. Campos and A. M. Cunha and Gašper Gantar},
title = {A model for predicting the mechanical properties of wood-plastic composites – A micro-mechanical approach},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {53},
number = {12},
year = {2007},
keywords = {wood-plastic composites; generalised method of cells (GMC); natural fibers; mechanical properties; },
abstract = {The development of a new composite that is made up of naturalfibres and low-price polymers, such as HDPE or PP, began in the 1990s. Because this material is relatively new to the market and due to the random characteristics of the fibres, no attempts have been made to analytically define the mechanical properties of this material. In this paper a micro-mechanical approach, called the generalised method of cells (GMCs), is introduced to describe the properties of injection-moulded wood-plastic composites made up of polypropylene (PP) or polystyrene (PS) and wood or cellulose short fibres. The main problem with an analytical approach is that the naturalfibres are not uniform in shape and size, which makes them hard to fit into standard mathematical models. In this paper the average values of the fibre sizes were used The materials were first scanned with optical and electron microscopes to determine the fibre properties and their scatter. These values were then used to determine the elastic and plastic response of the composite together with the maximum strength and elongation of the composite, where the Tsai-Hill failure-criterion was used. The results were then compared to the experimental data in order to evaluate the practical usefulness of this method. The time-dependent mechanical behaviour of the composite was not considered due to the complex and random properties of the fibre. },
issn = {0039-2480}, pages = {819-833}, doi = {},
url = {https://www.sv-jme.eu/sl/article/a-model-for-predicting-the-mechanical-properties-of-wood-plastic-composites-a-micro-mechanical-approach/}
}
Hančič, A.,Kosel, F.,Campos, A.,Cunha, A.,Gantar, G. 2007 August 53. A model for predicting the mechanical properties of wood-plastic composites – A micro-mechanical approach. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 53:12
%A Hančič, Aleš %A Kosel, Franc %A Campos, A. R. %A Cunha, A. M. %A Gantar, Gašper %D 2007 %T A model for predicting the mechanical properties of wood-plastic composites – A micro-mechanical approach %B 2007 %9 wood-plastic composites; generalised method of cells (GMC); natural fibers; mechanical properties; %! A model for predicting the mechanical properties of wood-plastic composites – A micro-mechanical approach %K wood-plastic composites; generalised method of cells (GMC); natural fibers; mechanical properties; %X The development of a new composite that is made up of naturalfibres and low-price polymers, such as HDPE or PP, began in the 1990s. Because this material is relatively new to the market and due to the random characteristics of the fibres, no attempts have been made to analytically define the mechanical properties of this material. In this paper a micro-mechanical approach, called the generalised method of cells (GMCs), is introduced to describe the properties of injection-moulded wood-plastic composites made up of polypropylene (PP) or polystyrene (PS) and wood or cellulose short fibres. The main problem with an analytical approach is that the naturalfibres are not uniform in shape and size, which makes them hard to fit into standard mathematical models. In this paper the average values of the fibre sizes were used The materials were first scanned with optical and electron microscopes to determine the fibre properties and their scatter. These values were then used to determine the elastic and plastic response of the composite together with the maximum strength and elongation of the composite, where the Tsai-Hill failure-criterion was used. The results were then compared to the experimental data in order to evaluate the practical usefulness of this method. The time-dependent mechanical behaviour of the composite was not considered due to the complex and random properties of the fibre. %U https://www.sv-jme.eu/sl/article/a-model-for-predicting-the-mechanical-properties-of-wood-plastic-composites-a-micro-mechanical-approach/ %0 Journal Article %R %& 819 %P 15 %J Strojniški vestnik - Journal of Mechanical Engineering %V 53 %N 12 %@ 0039-2480 %8 2017-08-18 %7 2017-08-18
Hančič, Aleš, Franc Kosel, A. R. Campos, A. M. Cunha, & Gašper Gantar. "A model for predicting the mechanical properties of wood-plastic composites – A micro-mechanical approach." Strojniški vestnik - Journal of Mechanical Engineering [Online], 53.12 (2007): 819-833. Web. 25 Apr. 2024
TY - JOUR AU - Hančič, Aleš AU - Kosel, Franc AU - Campos, A. R. AU - Cunha, A. M. AU - Gantar, Gašper PY - 2007 TI - A model for predicting the mechanical properties of wood-plastic composites – A micro-mechanical approach JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - wood-plastic composites; generalised method of cells (GMC); natural fibers; mechanical properties; N2 - The development of a new composite that is made up of naturalfibres and low-price polymers, such as HDPE or PP, began in the 1990s. Because this material is relatively new to the market and due to the random characteristics of the fibres, no attempts have been made to analytically define the mechanical properties of this material. In this paper a micro-mechanical approach, called the generalised method of cells (GMCs), is introduced to describe the properties of injection-moulded wood-plastic composites made up of polypropylene (PP) or polystyrene (PS) and wood or cellulose short fibres. The main problem with an analytical approach is that the naturalfibres are not uniform in shape and size, which makes them hard to fit into standard mathematical models. In this paper the average values of the fibre sizes were used The materials were first scanned with optical and electron microscopes to determine the fibre properties and their scatter. These values were then used to determine the elastic and plastic response of the composite together with the maximum strength and elongation of the composite, where the Tsai-Hill failure-criterion was used. The results were then compared to the experimental data in order to evaluate the practical usefulness of this method. The time-dependent mechanical behaviour of the composite was not considered due to the complex and random properties of the fibre. UR - https://www.sv-jme.eu/sl/article/a-model-for-predicting-the-mechanical-properties-of-wood-plastic-composites-a-micro-mechanical-approach/
@article{{}{.},
author = {Hančič, A., Kosel, F., Campos, A., Cunha, A., Gantar, G.},
title = {A model for predicting the mechanical properties of wood-plastic composites – A micro-mechanical approach},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {53},
number = {12},
year = {2007},
doi = {},
url = {https://www.sv-jme.eu/sl/article/a-model-for-predicting-the-mechanical-properties-of-wood-plastic-composites-a-micro-mechanical-approach/}
}
TY - JOUR AU - Hančič, Aleš AU - Kosel, Franc AU - Campos, A. R. AU - Cunha, A. M. AU - Gantar, Gašper PY - 2017/08/18 TI - A model for predicting the mechanical properties of wood-plastic composites – A micro-mechanical approach JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 53, No 12 (2007): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - wood-plastic composites, generalised method of cells (GMC), natural fibers, mechanical properties, N2 - The development of a new composite that is made up of naturalfibres and low-price polymers, such as HDPE or PP, began in the 1990s. Because this material is relatively new to the market and due to the random characteristics of the fibres, no attempts have been made to analytically define the mechanical properties of this material. In this paper a micro-mechanical approach, called the generalised method of cells (GMCs), is introduced to describe the properties of injection-moulded wood-plastic composites made up of polypropylene (PP) or polystyrene (PS) and wood or cellulose short fibres. The main problem with an analytical approach is that the naturalfibres are not uniform in shape and size, which makes them hard to fit into standard mathematical models. In this paper the average values of the fibre sizes were used The materials were first scanned with optical and electron microscopes to determine the fibre properties and their scatter. These values were then used to determine the elastic and plastic response of the composite together with the maximum strength and elongation of the composite, where the Tsai-Hill failure-criterion was used. The results were then compared to the experimental data in order to evaluate the practical usefulness of this method. The time-dependent mechanical behaviour of the composite was not considered due to the complex and random properties of the fibre. UR - https://www.sv-jme.eu/sl/article/a-model-for-predicting-the-mechanical-properties-of-wood-plastic-composites-a-micro-mechanical-approach/
Hančič, Aleš, Kosel, Franc, Campos, A., Cunha, A., AND Gantar, Gašper. "A model for predicting the mechanical properties of wood-plastic composites – A micro-mechanical approach" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 53 Number 12 (18 August 2017)
Strojniški vestnik - Journal of Mechanical Engineering 53(2007)12, 819-833
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
The development of a new composite that is made up of naturalfibres and low-price polymers, such as HDPE or PP, began in the 1990s. Because this material is relatively new to the market and due to the random characteristics of the fibres, no attempts have been made to analytically define the mechanical properties of this material. In this paper a micro-mechanical approach, called the generalised method of cells (GMCs), is introduced to describe the properties of injection-moulded wood-plastic composites made up of polypropylene (PP) or polystyrene (PS) and wood or cellulose short fibres. The main problem with an analytical approach is that the naturalfibres are not uniform in shape and size, which makes them hard to fit into standard mathematical models. In this paper the average values of the fibre sizes were used The materials were first scanned with optical and electron microscopes to determine the fibre properties and their scatter. These values were then used to determine the elastic and plastic response of the composite together with the maximum strength and elongation of the composite, where the Tsai-Hill failure-criterion was used. The results were then compared to the experimental data in order to evaluate the practical usefulness of this method. The time-dependent mechanical behaviour of the composite was not considered due to the complex and random properties of the fibre.