MUCHA, Jacek . A Study of Quality Parameters and Behaviour of Self-Piercing Riveted Aluminium Sheets with Different Joining Conditions. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 57, n.4, p. 323-333, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/a-study-of-quality-parameters-and-behaviour-of-self-piercing-riveted-aluminium-sheets-with-different-joining-conditions/>. Date accessed: 15 oct. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2009.043.
Mucha, J. (2011). A Study of Quality Parameters and Behaviour of Self-Piercing Riveted Aluminium Sheets with Different Joining Conditions. Strojniški vestnik - Journal of Mechanical Engineering, 57(4), 323-333. doi:http://dx.doi.org/10.5545/sv-jme.2009.043
@article{sv-jmesv-jme.2009.043, author = {Jacek Mucha}, title = {A Study of Quality Parameters and Behaviour of Self-Piercing Riveted Aluminium Sheets with Different Joining Conditions}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {57}, number = {4}, year = {2011}, keywords = {joint formation; rivetion load; mechanical properties; finite element modelling}, abstract = {This paper presents research progress in the assembly dimensional prediction area, using finite element analysis results. A case study of the SPR of two sheets of the aluminium alloy using a steel rivet was investigated. The riveting analysis has been performed for joined sheets using finite element method (FEM) with MSC Marc Mentat software. Thus, a simulated analysis was adopted in this study to improve industrial productivity. The comparison analysis has been performed within the numerical experiment range to cover the effect of various riveting process parameters on the rivet deformation. Proper selection of corresponding rivet material features, i.e. its yield point and strain hardening, enables significant changing of the sheet joining process and specific finished joint parameters. The finite element simulation is effective in determining the optimal conditions.}, issn = {0039-2480}, pages = {323-333}, doi = {10.5545/sv-jme.2009.043}, url = {https://www.sv-jme.eu/sl/article/a-study-of-quality-parameters-and-behaviour-of-self-piercing-riveted-aluminium-sheets-with-different-joining-conditions/} }
Mucha, J. 2011 June 57. A Study of Quality Parameters and Behaviour of Self-Piercing Riveted Aluminium Sheets with Different Joining Conditions. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 57:4
%A Mucha, Jacek %D 2011 %T A Study of Quality Parameters and Behaviour of Self-Piercing Riveted Aluminium Sheets with Different Joining Conditions %B 2011 %9 joint formation; rivetion load; mechanical properties; finite element modelling %! A Study of Quality Parameters and Behaviour of Self-Piercing Riveted Aluminium Sheets with Different Joining Conditions %K joint formation; rivetion load; mechanical properties; finite element modelling %X This paper presents research progress in the assembly dimensional prediction area, using finite element analysis results. A case study of the SPR of two sheets of the aluminium alloy using a steel rivet was investigated. The riveting analysis has been performed for joined sheets using finite element method (FEM) with MSC Marc Mentat software. Thus, a simulated analysis was adopted in this study to improve industrial productivity. The comparison analysis has been performed within the numerical experiment range to cover the effect of various riveting process parameters on the rivet deformation. Proper selection of corresponding rivet material features, i.e. its yield point and strain hardening, enables significant changing of the sheet joining process and specific finished joint parameters. The finite element simulation is effective in determining the optimal conditions. %U https://www.sv-jme.eu/sl/article/a-study-of-quality-parameters-and-behaviour-of-self-piercing-riveted-aluminium-sheets-with-different-joining-conditions/ %0 Journal Article %R 10.5545/sv-jme.2009.043 %& 323 %P 11 %J Strojniški vestnik - Journal of Mechanical Engineering %V 57 %N 4 %@ 0039-2480 %8 2018-06-28 %7 2018-06-28
Mucha, Jacek. "A Study of Quality Parameters and Behaviour of Self-Piercing Riveted Aluminium Sheets with Different Joining Conditions." Strojniški vestnik - Journal of Mechanical Engineering [Online], 57.4 (2011): 323-333. Web. 15 Oct. 2024
TY - JOUR AU - Mucha, Jacek PY - 2011 TI - A Study of Quality Parameters and Behaviour of Self-Piercing Riveted Aluminium Sheets with Different Joining Conditions JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2009.043 KW - joint formation; rivetion load; mechanical properties; finite element modelling N2 - This paper presents research progress in the assembly dimensional prediction area, using finite element analysis results. A case study of the SPR of two sheets of the aluminium alloy using a steel rivet was investigated. The riveting analysis has been performed for joined sheets using finite element method (FEM) with MSC Marc Mentat software. Thus, a simulated analysis was adopted in this study to improve industrial productivity. The comparison analysis has been performed within the numerical experiment range to cover the effect of various riveting process parameters on the rivet deformation. Proper selection of corresponding rivet material features, i.e. its yield point and strain hardening, enables significant changing of the sheet joining process and specific finished joint parameters. The finite element simulation is effective in determining the optimal conditions. UR - https://www.sv-jme.eu/sl/article/a-study-of-quality-parameters-and-behaviour-of-self-piercing-riveted-aluminium-sheets-with-different-joining-conditions/
@article{{sv-jme}{sv-jme.2009.043}, author = {Mucha, J.}, title = {A Study of Quality Parameters and Behaviour of Self-Piercing Riveted Aluminium Sheets with Different Joining Conditions}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {57}, number = {4}, year = {2011}, doi = {10.5545/sv-jme.2009.043}, url = {https://www.sv-jme.eu/sl/article/a-study-of-quality-parameters-and-behaviour-of-self-piercing-riveted-aluminium-sheets-with-different-joining-conditions/} }
TY - JOUR AU - Mucha, Jacek PY - 2018/06/28 TI - A Study of Quality Parameters and Behaviour of Self-Piercing Riveted Aluminium Sheets with Different Joining Conditions JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 57, No 4 (2011): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2009.043 KW - joint formation, rivetion load, mechanical properties, finite element modelling N2 - This paper presents research progress in the assembly dimensional prediction area, using finite element analysis results. A case study of the SPR of two sheets of the aluminium alloy using a steel rivet was investigated. The riveting analysis has been performed for joined sheets using finite element method (FEM) with MSC Marc Mentat software. Thus, a simulated analysis was adopted in this study to improve industrial productivity. The comparison analysis has been performed within the numerical experiment range to cover the effect of various riveting process parameters on the rivet deformation. Proper selection of corresponding rivet material features, i.e. its yield point and strain hardening, enables significant changing of the sheet joining process and specific finished joint parameters. The finite element simulation is effective in determining the optimal conditions. UR - https://www.sv-jme.eu/sl/article/a-study-of-quality-parameters-and-behaviour-of-self-piercing-riveted-aluminium-sheets-with-different-joining-conditions/
Mucha, Jacek"A Study of Quality Parameters and Behaviour of Self-Piercing Riveted Aluminium Sheets with Different Joining Conditions" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 57 Number 4 (28 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 57(2011)4, 323-333
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
This paper presents research progress in the assembly dimensional prediction area, using finite element analysis results. A case study of the SPR of two sheets of the aluminium alloy using a steel rivet was investigated. The riveting analysis has been performed for joined sheets using finite element method (FEM) with MSC Marc Mentat software. Thus, a simulated analysis was adopted in this study to improve industrial productivity. The comparison analysis has been performed within the numerical experiment range to cover the effect of various riveting process parameters on the rivet deformation. Proper selection of corresponding rivet material features, i.e. its yield point and strain hardening, enables significant changing of the sheet joining process and specific finished joint parameters. The finite element simulation is effective in determining the optimal conditions.