Air-Coupled Lamb and Rayleigh Waves for Remote NDE of Defects and Material Elastic Properties

1390 Ogledov
1108 Prenosov
Izvoz citacije: ABNT
SOLODOV, Igor ;DÖRING, Daniel ;BUSSE, Gerd .
Air-Coupled Lamb and Rayleigh Waves for Remote NDE of Defects and Material Elastic Properties. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 56, n.9, p. 557-564, october 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/air-coupled-lamb-and-rayleigh-waves-for-remote-nde-of-defects-and-material-elastic-properties/>. Date accessed: 26 jun. 2022. 
doi:http://dx.doi.org/.
Solodov, I., Döring, D., & Busse, G.
(2010).
Air-Coupled Lamb and Rayleigh Waves for Remote NDE of Defects and Material Elastic Properties.
Strojniški vestnik - Journal of Mechanical Engineering, 56(9), 557-564.
doi:http://dx.doi.org/
@article{.,
	author = {Igor  Solodov and Daniel  Döring and Gerd  Busse},
	title = {Air-Coupled Lamb and Rayleigh Waves for Remote NDE of Defects and Material Elastic Properties},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {56},
	number = {9},
	year = {2010},
	keywords = {air-coupled ultrasonic testing; Lamb and Rayleigh waves; material characterization; elastic anisotropy; elastic depth profiling; process monitoring; NDT imaging; },
	abstract = {Conventional air-coupled ultrasound (ACU) is a well-established tool for acoustic NDT and material characterization. Its major shortcoming is concerned with a week penetration into solid materials due to a severe impedance mismatch at the air-solid interface. A dramatic rise in acoustic coupling is obtained by using acoustic mode conversion into plate and surface waves in slanted configurations. In our experiments, an increase of the ultrasound amplitude by up to one order of magnitude was observed in various materials (metals, wood, concrete, composite) under phase matching conditions. On this basis, fully air-coupled configurations are developed and applied for non-contact NDT. The methods based on this principle enable precise measurements of fibre directions and quantification of in-plane anisotropy in composites and natural materials, elastic depth profiling, drying of coatings, advanced imaging of cracked defects and delaminations.},
	issn = {0039-2480},	pages = {557-564},	doi = {},
	url = {https://www.sv-jme.eu/sl/article/air-coupled-lamb-and-rayleigh-waves-for-remote-nde-of-defects-and-material-elastic-properties/}
}
Solodov, I.,Döring, D.,Busse, G.
2010 October 56. Air-Coupled Lamb and Rayleigh Waves for Remote NDE of Defects and Material Elastic Properties. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 56:9
%A Solodov, Igor 
%A Döring, Daniel 
%A Busse, Gerd 
%D 2010
%T Air-Coupled Lamb and Rayleigh Waves for Remote NDE of Defects and Material Elastic Properties
%B 2010
%9 air-coupled ultrasonic testing; Lamb and Rayleigh waves; material characterization; elastic anisotropy; elastic depth profiling; process monitoring; NDT imaging; 
%! Air-Coupled Lamb and Rayleigh Waves for Remote NDE of Defects and Material Elastic Properties
%K air-coupled ultrasonic testing; Lamb and Rayleigh waves; material characterization; elastic anisotropy; elastic depth profiling; process monitoring; NDT imaging; 
%X Conventional air-coupled ultrasound (ACU) is a well-established tool for acoustic NDT and material characterization. Its major shortcoming is concerned with a week penetration into solid materials due to a severe impedance mismatch at the air-solid interface. A dramatic rise in acoustic coupling is obtained by using acoustic mode conversion into plate and surface waves in slanted configurations. In our experiments, an increase of the ultrasound amplitude by up to one order of magnitude was observed in various materials (metals, wood, concrete, composite) under phase matching conditions. On this basis, fully air-coupled configurations are developed and applied for non-contact NDT. The methods based on this principle enable precise measurements of fibre directions and quantification of in-plane anisotropy in composites and natural materials, elastic depth profiling, drying of coatings, advanced imaging of cracked defects and delaminations.
%U https://www.sv-jme.eu/sl/article/air-coupled-lamb-and-rayleigh-waves-for-remote-nde-of-defects-and-material-elastic-properties/
%0 Journal Article
%R 
%& 557
%P 8
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 56
%N 9
%@ 0039-2480
%8 2017-10-24
%7 2017-10-24
Solodov, Igor, Daniel  Döring, & Gerd  Busse.
"Air-Coupled Lamb and Rayleigh Waves for Remote NDE of Defects and Material Elastic Properties." Strojniški vestnik - Journal of Mechanical Engineering [Online], 56.9 (2010): 557-564. Web.  26 Jun. 2022
TY  - JOUR
AU  - Solodov, Igor 
AU  - Döring, Daniel 
AU  - Busse, Gerd 
PY  - 2010
TI  - Air-Coupled Lamb and Rayleigh Waves for Remote NDE of Defects and Material Elastic Properties
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - air-coupled ultrasonic testing; Lamb and Rayleigh waves; material characterization; elastic anisotropy; elastic depth profiling; process monitoring; NDT imaging; 
N2  - Conventional air-coupled ultrasound (ACU) is a well-established tool for acoustic NDT and material characterization. Its major shortcoming is concerned with a week penetration into solid materials due to a severe impedance mismatch at the air-solid interface. A dramatic rise in acoustic coupling is obtained by using acoustic mode conversion into plate and surface waves in slanted configurations. In our experiments, an increase of the ultrasound amplitude by up to one order of magnitude was observed in various materials (metals, wood, concrete, composite) under phase matching conditions. On this basis, fully air-coupled configurations are developed and applied for non-contact NDT. The methods based on this principle enable precise measurements of fibre directions and quantification of in-plane anisotropy in composites and natural materials, elastic depth profiling, drying of coatings, advanced imaging of cracked defects and delaminations.
UR  - https://www.sv-jme.eu/sl/article/air-coupled-lamb-and-rayleigh-waves-for-remote-nde-of-defects-and-material-elastic-properties/
@article{{}{.},
	author = {Solodov, I., Döring, D., Busse, G.},
	title = {Air-Coupled Lamb and Rayleigh Waves for Remote NDE of Defects and Material Elastic Properties},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {56},
	number = {9},
	year = {2010},
	doi = {},
	url = {https://www.sv-jme.eu/sl/article/air-coupled-lamb-and-rayleigh-waves-for-remote-nde-of-defects-and-material-elastic-properties/}
}
TY  - JOUR
AU  - Solodov, Igor 
AU  - Döring, Daniel 
AU  - Busse, Gerd 
PY  - 2017/10/24
TI  - Air-Coupled Lamb and Rayleigh Waves for Remote NDE of Defects and Material Elastic Properties
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 56, No 9 (2010): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - air-coupled ultrasonic testing, Lamb and Rayleigh waves, material characterization, elastic anisotropy, elastic depth profiling, process monitoring, NDT imaging, 
N2  - Conventional air-coupled ultrasound (ACU) is a well-established tool for acoustic NDT and material characterization. Its major shortcoming is concerned with a week penetration into solid materials due to a severe impedance mismatch at the air-solid interface. A dramatic rise in acoustic coupling is obtained by using acoustic mode conversion into plate and surface waves in slanted configurations. In our experiments, an increase of the ultrasound amplitude by up to one order of magnitude was observed in various materials (metals, wood, concrete, composite) under phase matching conditions. On this basis, fully air-coupled configurations are developed and applied for non-contact NDT. The methods based on this principle enable precise measurements of fibre directions and quantification of in-plane anisotropy in composites and natural materials, elastic depth profiling, drying of coatings, advanced imaging of cracked defects and delaminations.
UR  - https://www.sv-jme.eu/sl/article/air-coupled-lamb-and-rayleigh-waves-for-remote-nde-of-defects-and-material-elastic-properties/
Solodov, Igor, Döring, Daniel, AND Busse, Gerd.
"Air-Coupled Lamb and Rayleigh Waves for Remote NDE of Defects and Material Elastic Properties" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 56 Number 9 (24 October 2017)

Avtorji

Inštitucije

  • Institute for Polymer Technology, NDE Group (IKT-ZfP), Germany
  • Institute for Polymer Technology, NDE Group (IKT-ZfP), Germany
  • Institute for Polymer Technology, NDE Group (IKT-ZfP), Germany

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 56(2010)9, 557-564
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

Conventional air-coupled ultrasound (ACU) is a well-established tool for acoustic NDT and material characterization. Its major shortcoming is concerned with a week penetration into solid materials due to a severe impedance mismatch at the air-solid interface. A dramatic rise in acoustic coupling is obtained by using acoustic mode conversion into plate and surface waves in slanted configurations. In our experiments, an increase of the ultrasound amplitude by up to one order of magnitude was observed in various materials (metals, wood, concrete, composite) under phase matching conditions. On this basis, fully air-coupled configurations are developed and applied for non-contact NDT. The methods based on this principle enable precise measurements of fibre directions and quantification of in-plane anisotropy in composites and natural materials, elastic depth profiling, drying of coatings, advanced imaging of cracked defects and delaminations.

air-coupled ultrasonic testing; Lamb and Rayleigh waves; material characterization; elastic anisotropy; elastic depth profiling; process monitoring; NDT imaging;