An Analysis of Temperatures and Thermal Energy during Cutting

975 Ogledov
931 Prenosov
Izvoz citacije: ABNT
MILFELNER, Matjaž ;ČUŠ, Franci .
An Analysis of Temperatures and Thermal Energy during Cutting. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 47, n.1, p. 45-52, july 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/an-analysis-of-temperatures-and-thermal-energy-during-cutting/>. Date accessed: 19 sep. 2021. 
doi:http://dx.doi.org/.
Milfelner, M., & Čuš, F.
(2001).
An Analysis of Temperatures and Thermal Energy during Cutting.
Strojniški vestnik - Journal of Mechanical Engineering, 47(1), 45-52.
doi:http://dx.doi.org/
@article{.,
	author = {Matjaž  Milfelner and Franci  Čuš},
	title = {An Analysis of Temperatures and Thermal Energy during Cutting},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {47},
	number = {1},
	year = {2001},
	keywords = {temperature; thermal energy; shear plane; tool face; },
	abstract = {This paper describes an analysis of the temperatures and energies which occur during the cutting process. The influence of the temperature on the cutting face and the cutting insert edge is very important since it causes wear of the tool face and of the tool cutting edge and thus the tool’s resistance to wear is reduced. The final part of the paper shows an example of a simulation of the isothermal lines on the tool cutting edge for the case of a change of cutting speed and a change of the tool geometry.},
	issn = {0039-2480},	pages = {45-52},	doi = {},
	url = {https://www.sv-jme.eu/sl/article/an-analysis-of-temperatures-and-thermal-energy-during-cutting/}
}
Milfelner, M.,Čuš, F.
2001 July 47. An Analysis of Temperatures and Thermal Energy during Cutting. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 47:1
%A Milfelner, Matjaž 
%A Čuš, Franci 
%D 2001
%T An Analysis of Temperatures and Thermal Energy during Cutting
%B 2001
%9 temperature; thermal energy; shear plane; tool face; 
%! An Analysis of Temperatures and Thermal Energy during Cutting
%K temperature; thermal energy; shear plane; tool face; 
%X This paper describes an analysis of the temperatures and energies which occur during the cutting process. The influence of the temperature on the cutting face and the cutting insert edge is very important since it causes wear of the tool face and of the tool cutting edge and thus the tool’s resistance to wear is reduced. The final part of the paper shows an example of a simulation of the isothermal lines on the tool cutting edge for the case of a change of cutting speed and a change of the tool geometry.
%U https://www.sv-jme.eu/sl/article/an-analysis-of-temperatures-and-thermal-energy-during-cutting/
%0 Journal Article
%R 
%& 45
%P 8
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 47
%N 1
%@ 0039-2480
%8 2017-07-07
%7 2017-07-07
Milfelner, Matjaž, & Franci  Čuš.
"An Analysis of Temperatures and Thermal Energy during Cutting." Strojniški vestnik - Journal of Mechanical Engineering [Online], 47.1 (2001): 45-52. Web.  19 Sep. 2021
TY  - JOUR
AU  - Milfelner, Matjaž 
AU  - Čuš, Franci 
PY  - 2001
TI  - An Analysis of Temperatures and Thermal Energy during Cutting
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - temperature; thermal energy; shear plane; tool face; 
N2  - This paper describes an analysis of the temperatures and energies which occur during the cutting process. The influence of the temperature on the cutting face and the cutting insert edge is very important since it causes wear of the tool face and of the tool cutting edge and thus the tool’s resistance to wear is reduced. The final part of the paper shows an example of a simulation of the isothermal lines on the tool cutting edge for the case of a change of cutting speed and a change of the tool geometry.
UR  - https://www.sv-jme.eu/sl/article/an-analysis-of-temperatures-and-thermal-energy-during-cutting/
@article{{}{.},
	author = {Milfelner, M., Čuš, F.},
	title = {An Analysis of Temperatures and Thermal Energy during Cutting},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {47},
	number = {1},
	year = {2001},
	doi = {},
	url = {https://www.sv-jme.eu/sl/article/an-analysis-of-temperatures-and-thermal-energy-during-cutting/}
}
TY  - JOUR
AU  - Milfelner, Matjaž 
AU  - Čuš, Franci 
PY  - 2017/07/07
TI  - An Analysis of Temperatures and Thermal Energy during Cutting
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 47, No 1 (2001): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - temperature, thermal energy, shear plane, tool face, 
N2  - This paper describes an analysis of the temperatures and energies which occur during the cutting process. The influence of the temperature on the cutting face and the cutting insert edge is very important since it causes wear of the tool face and of the tool cutting edge and thus the tool’s resistance to wear is reduced. The final part of the paper shows an example of a simulation of the isothermal lines on the tool cutting edge for the case of a change of cutting speed and a change of the tool geometry.
UR  - https://www.sv-jme.eu/sl/article/an-analysis-of-temperatures-and-thermal-energy-during-cutting/
Milfelner, Matjaž, AND Čuš, Franci.
"An Analysis of Temperatures and Thermal Energy during Cutting" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 47 Number 1 (07 July 2017)

Avtorji

Inštitucije

  • University of Maribor, Faculty of Mechanical Engineering, Slovenia
  • University of Maribor, Faculty of Mechanical Engineering, Slovenia

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 47(2001)1, 45-52

This paper describes an analysis of the temperatures and energies which occur during the cutting process. The influence of the temperature on the cutting face and the cutting insert edge is very important since it causes wear of the tool face and of the tool cutting edge and thus the tool’s resistance to wear is reduced. The final part of the paper shows an example of a simulation of the isothermal lines on the tool cutting edge for the case of a change of cutting speed and a change of the tool geometry.

temperature; thermal energy; shear plane; tool face;