An Analysis of the Parameters of Reversible Francis-Type Pump Turbines

2267 Ogledov
450 Prenosov
Izvoz citacije: ABNT
MRKIĆ, Milo .
An Analysis of the Parameters of Reversible Francis-Type Pump Turbines. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 48, n.10, p. 528-540, july 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/an-analysis-of-the-parameters-of-reversible-francis-type-pump-turbines/>. Date accessed: 08 oct. 2024. 
doi:http://dx.doi.org/.
Mrkić, M.
(2002).
An Analysis of the Parameters of Reversible Francis-Type Pump Turbines.
Strojniški vestnik - Journal of Mechanical Engineering, 48(10), 528-540.
doi:http://dx.doi.org/
@article{.,
	author = {Milo  Mrkić},
	title = {An Analysis of the Parameters of Reversible Francis-Type Pump Turbines},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {48},
	number = {10},
	year = {2002},
	keywords = {hydroelectric power stations; Francis turbines; reversible pump turbines; parameter analysis; },
	abstract = {When designing pumping reservoir hydroelectric power stations the designer must have available detailed data on the parameters of the hydraulic machines that will be installed in the power plant. This is particularly important when reversible pumping-turbine units are installed, since they must best suit the working mode in both directions of the flow (pumping and turbine mode) so that the installed power of the unit is best utilized in the case of filling as well as emptying the upstream reservoir in accordance with the requirements of the public electric power system. When the planning engineer starts to project, according to the nomenclature he chooses the appropriate type of turbine and then determines the basic parameters for the reversible pump-turbine (RPT) by using universal characteristics or graphical nomenclature. Since the RPT nomenclature still does not exist and the universal characteristics only exist for a limited number of types it is appropriate at the initial stage of the design to define the basic parameters of the RPT, initially according to the specific number of revolutions. In the work in this context some results of the study of available technical literature as well as the results of theoretical works are given. The results of model researches and researches in real conditions which were performed in exploitation of water power university department in Moscow (institute MISI), with participation of the author are also presented.},
	issn = {0039-2480},	pages = {528-540},	doi = {},
	url = {https://www.sv-jme.eu/sl/article/an-analysis-of-the-parameters-of-reversible-francis-type-pump-turbines/}
}
Mrkić, M.
2002 July 48. An Analysis of the Parameters of Reversible Francis-Type Pump Turbines. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 48:10
%A Mrkić, Milo 
%D 2002
%T An Analysis of the Parameters of Reversible Francis-Type Pump Turbines
%B 2002
%9 hydroelectric power stations; Francis turbines; reversible pump turbines; parameter analysis; 
%! An Analysis of the Parameters of Reversible Francis-Type Pump Turbines
%K hydroelectric power stations; Francis turbines; reversible pump turbines; parameter analysis; 
%X When designing pumping reservoir hydroelectric power stations the designer must have available detailed data on the parameters of the hydraulic machines that will be installed in the power plant. This is particularly important when reversible pumping-turbine units are installed, since they must best suit the working mode in both directions of the flow (pumping and turbine mode) so that the installed power of the unit is best utilized in the case of filling as well as emptying the upstream reservoir in accordance with the requirements of the public electric power system. When the planning engineer starts to project, according to the nomenclature he chooses the appropriate type of turbine and then determines the basic parameters for the reversible pump-turbine (RPT) by using universal characteristics or graphical nomenclature. Since the RPT nomenclature still does not exist and the universal characteristics only exist for a limited number of types it is appropriate at the initial stage of the design to define the basic parameters of the RPT, initially according to the specific number of revolutions. In the work in this context some results of the study of available technical literature as well as the results of theoretical works are given. The results of model researches and researches in real conditions which were performed in exploitation of water power university department in Moscow (institute MISI), with participation of the author are also presented.
%U https://www.sv-jme.eu/sl/article/an-analysis-of-the-parameters-of-reversible-francis-type-pump-turbines/
%0 Journal Article
%R 
%& 528
%P 13
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 48
%N 10
%@ 0039-2480
%8 2017-07-07
%7 2017-07-07
Mrkić, Milo.
"An Analysis of the Parameters of Reversible Francis-Type Pump Turbines." Strojniški vestnik - Journal of Mechanical Engineering [Online], 48.10 (2002): 528-540. Web.  08 Oct. 2024
TY  - JOUR
AU  - Mrkić, Milo 
PY  - 2002
TI  - An Analysis of the Parameters of Reversible Francis-Type Pump Turbines
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - hydroelectric power stations; Francis turbines; reversible pump turbines; parameter analysis; 
N2  - When designing pumping reservoir hydroelectric power stations the designer must have available detailed data on the parameters of the hydraulic machines that will be installed in the power plant. This is particularly important when reversible pumping-turbine units are installed, since they must best suit the working mode in both directions of the flow (pumping and turbine mode) so that the installed power of the unit is best utilized in the case of filling as well as emptying the upstream reservoir in accordance with the requirements of the public electric power system. When the planning engineer starts to project, according to the nomenclature he chooses the appropriate type of turbine and then determines the basic parameters for the reversible pump-turbine (RPT) by using universal characteristics or graphical nomenclature. Since the RPT nomenclature still does not exist and the universal characteristics only exist for a limited number of types it is appropriate at the initial stage of the design to define the basic parameters of the RPT, initially according to the specific number of revolutions. In the work in this context some results of the study of available technical literature as well as the results of theoretical works are given. The results of model researches and researches in real conditions which were performed in exploitation of water power university department in Moscow (institute MISI), with participation of the author are also presented.
UR  - https://www.sv-jme.eu/sl/article/an-analysis-of-the-parameters-of-reversible-francis-type-pump-turbines/
@article{{}{.},
	author = {Mrkić, M.},
	title = {An Analysis of the Parameters of Reversible Francis-Type Pump Turbines},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {48},
	number = {10},
	year = {2002},
	doi = {},
	url = {https://www.sv-jme.eu/sl/article/an-analysis-of-the-parameters-of-reversible-francis-type-pump-turbines/}
}
TY  - JOUR
AU  - Mrkić, Milo 
PY  - 2017/07/07
TI  - An Analysis of the Parameters of Reversible Francis-Type Pump Turbines
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 48, No 10 (2002): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - hydroelectric power stations, Francis turbines, reversible pump turbines, parameter analysis, 
N2  - When designing pumping reservoir hydroelectric power stations the designer must have available detailed data on the parameters of the hydraulic machines that will be installed in the power plant. This is particularly important when reversible pumping-turbine units are installed, since they must best suit the working mode in both directions of the flow (pumping and turbine mode) so that the installed power of the unit is best utilized in the case of filling as well as emptying the upstream reservoir in accordance with the requirements of the public electric power system. When the planning engineer starts to project, according to the nomenclature he chooses the appropriate type of turbine and then determines the basic parameters for the reversible pump-turbine (RPT) by using universal characteristics or graphical nomenclature. Since the RPT nomenclature still does not exist and the universal characteristics only exist for a limited number of types it is appropriate at the initial stage of the design to define the basic parameters of the RPT, initially according to the specific number of revolutions. In the work in this context some results of the study of available technical literature as well as the results of theoretical works are given. The results of model researches and researches in real conditions which were performed in exploitation of water power university department in Moscow (institute MISI), with participation of the author are also presented.
UR  - https://www.sv-jme.eu/sl/article/an-analysis-of-the-parameters-of-reversible-francis-type-pump-turbines/
Mrkić, Milo"An Analysis of the Parameters of Reversible Francis-Type Pump Turbines" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 48 Number 10 (07 July 2017)

Avtorji

Inštitucije

  • University of Montenegro, Faculty of Mechanical Engineering Podgorica, Montenegro

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 48(2002)10, 528-540
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

When designing pumping reservoir hydroelectric power stations the designer must have available detailed data on the parameters of the hydraulic machines that will be installed in the power plant. This is particularly important when reversible pumping-turbine units are installed, since they must best suit the working mode in both directions of the flow (pumping and turbine mode) so that the installed power of the unit is best utilized in the case of filling as well as emptying the upstream reservoir in accordance with the requirements of the public electric power system. When the planning engineer starts to project, according to the nomenclature he chooses the appropriate type of turbine and then determines the basic parameters for the reversible pump-turbine (RPT) by using universal characteristics or graphical nomenclature. Since the RPT nomenclature still does not exist and the universal characteristics only exist for a limited number of types it is appropriate at the initial stage of the design to define the basic parameters of the RPT, initially according to the specific number of revolutions. In the work in this context some results of the study of available technical literature as well as the results of theoretical works are given. The results of model researches and researches in real conditions which were performed in exploitation of water power university department in Moscow (institute MISI), with participation of the author are also presented.

hydroelectric power stations; Francis turbines; reversible pump turbines; parameter analysis;