An Analysis of the Spreading of a Holding Pressure by Means of a Pliable Blank Holder with the Controllable Holding Force during a Deep-Drawing Process

1012 Ogledov
725 Prenosov
Izvoz citacije: ABNT
JERMAN, Boris ;KRAMAR, Janez ;HODNIK, Roman .
An Analysis of the Spreading of a Holding Pressure by Means of a Pliable Blank Holder with the Controllable Holding Force during a Deep-Drawing Process. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 47, n.2, p. 83-93, july 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/an-analysis-of-the-spreading-of-a-holding-pressure-by-means-of-a-pliable-blank-holder-with-the-controllable-holding-force-during-a-deep-drawing-process/>. Date accessed: 17 sep. 2021. 
doi:http://dx.doi.org/.
Jerman, B., Kramar, J., & Hodnik, R.
(2001).
An Analysis of the Spreading of a Holding Pressure by Means of a Pliable Blank Holder with the Controllable Holding Force during a Deep-Drawing Process.
Strojniški vestnik - Journal of Mechanical Engineering, 47(2), 83-93.
doi:http://dx.doi.org/
@article{.,
	author = {Boris  Jerman and Janez  Kramar and Roman  Hodnik},
	title = {An Analysis of the Spreading of a Holding Pressure by Means of a Pliable Blank Holder with the Controllable Holding Force during a Deep-Drawing Process},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {47},
	number = {2},
	year = {2001},
	keywords = {deep drawing; holders; holding force; applicability analysis; },
	abstract = {One of the most important parameters in the deep-drawing process is the force holding the blank. In a desire to improve the quality with products of complex geometries, forming technology has focused developments on better time-and-place control of the holding force. For a more efficient location control of the holding force it is necessary to replace highly rigid blank holders with pliable or segmented blank holders. This paper discusses the holding conditions when a pliable blank holder of thickness 30 mm presses against the blank with 16 hydraulic cylinders during the process of forming a test product. The results of the research show the local distributions of pressure acting on the blank for a sequence of states during the process, taking into account the changes in the shape and the thickness of the blank.},
	issn = {0039-2480},	pages = {83-93},	doi = {},
	url = {https://www.sv-jme.eu/sl/article/an-analysis-of-the-spreading-of-a-holding-pressure-by-means-of-a-pliable-blank-holder-with-the-controllable-holding-force-during-a-deep-drawing-process/}
}
Jerman, B.,Kramar, J.,Hodnik, R.
2001 July 47. An Analysis of the Spreading of a Holding Pressure by Means of a Pliable Blank Holder with the Controllable Holding Force during a Deep-Drawing Process. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 47:2
%A Jerman, Boris 
%A Kramar, Janez 
%A Hodnik, Roman 
%D 2001
%T An Analysis of the Spreading of a Holding Pressure by Means of a Pliable Blank Holder with the Controllable Holding Force during a Deep-Drawing Process
%B 2001
%9 deep drawing; holders; holding force; applicability analysis; 
%! An Analysis of the Spreading of a Holding Pressure by Means of a Pliable Blank Holder with the Controllable Holding Force during a Deep-Drawing Process
%K deep drawing; holders; holding force; applicability analysis; 
%X One of the most important parameters in the deep-drawing process is the force holding the blank. In a desire to improve the quality with products of complex geometries, forming technology has focused developments on better time-and-place control of the holding force. For a more efficient location control of the holding force it is necessary to replace highly rigid blank holders with pliable or segmented blank holders. This paper discusses the holding conditions when a pliable blank holder of thickness 30 mm presses against the blank with 16 hydraulic cylinders during the process of forming a test product. The results of the research show the local distributions of pressure acting on the blank for a sequence of states during the process, taking into account the changes in the shape and the thickness of the blank.
%U https://www.sv-jme.eu/sl/article/an-analysis-of-the-spreading-of-a-holding-pressure-by-means-of-a-pliable-blank-holder-with-the-controllable-holding-force-during-a-deep-drawing-process/
%0 Journal Article
%R 
%& 83
%P 11
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 47
%N 2
%@ 0039-2480
%8 2017-07-07
%7 2017-07-07
Jerman, Boris, Janez  Kramar, & Roman  Hodnik.
"An Analysis of the Spreading of a Holding Pressure by Means of a Pliable Blank Holder with the Controllable Holding Force during a Deep-Drawing Process." Strojniški vestnik - Journal of Mechanical Engineering [Online], 47.2 (2001): 83-93. Web.  17 Sep. 2021
TY  - JOUR
AU  - Jerman, Boris 
AU  - Kramar, Janez 
AU  - Hodnik, Roman 
PY  - 2001
TI  - An Analysis of the Spreading of a Holding Pressure by Means of a Pliable Blank Holder with the Controllable Holding Force during a Deep-Drawing Process
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - deep drawing; holders; holding force; applicability analysis; 
N2  - One of the most important parameters in the deep-drawing process is the force holding the blank. In a desire to improve the quality with products of complex geometries, forming technology has focused developments on better time-and-place control of the holding force. For a more efficient location control of the holding force it is necessary to replace highly rigid blank holders with pliable or segmented blank holders. This paper discusses the holding conditions when a pliable blank holder of thickness 30 mm presses against the blank with 16 hydraulic cylinders during the process of forming a test product. The results of the research show the local distributions of pressure acting on the blank for a sequence of states during the process, taking into account the changes in the shape and the thickness of the blank.
UR  - https://www.sv-jme.eu/sl/article/an-analysis-of-the-spreading-of-a-holding-pressure-by-means-of-a-pliable-blank-holder-with-the-controllable-holding-force-during-a-deep-drawing-process/
@article{{}{.},
	author = {Jerman, B., Kramar, J., Hodnik, R.},
	title = {An Analysis of the Spreading of a Holding Pressure by Means of a Pliable Blank Holder with the Controllable Holding Force during a Deep-Drawing Process},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {47},
	number = {2},
	year = {2001},
	doi = {},
	url = {https://www.sv-jme.eu/sl/article/an-analysis-of-the-spreading-of-a-holding-pressure-by-means-of-a-pliable-blank-holder-with-the-controllable-holding-force-during-a-deep-drawing-process/}
}
TY  - JOUR
AU  - Jerman, Boris 
AU  - Kramar, Janez 
AU  - Hodnik, Roman 
PY  - 2017/07/07
TI  - An Analysis of the Spreading of a Holding Pressure by Means of a Pliable Blank Holder with the Controllable Holding Force during a Deep-Drawing Process
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 47, No 2 (2001): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - deep drawing, holders, holding force, applicability analysis, 
N2  - One of the most important parameters in the deep-drawing process is the force holding the blank. In a desire to improve the quality with products of complex geometries, forming technology has focused developments on better time-and-place control of the holding force. For a more efficient location control of the holding force it is necessary to replace highly rigid blank holders with pliable or segmented blank holders. This paper discusses the holding conditions when a pliable blank holder of thickness 30 mm presses against the blank with 16 hydraulic cylinders during the process of forming a test product. The results of the research show the local distributions of pressure acting on the blank for a sequence of states during the process, taking into account the changes in the shape and the thickness of the blank.
UR  - https://www.sv-jme.eu/sl/article/an-analysis-of-the-spreading-of-a-holding-pressure-by-means-of-a-pliable-blank-holder-with-the-controllable-holding-force-during-a-deep-drawing-process/
Jerman, Boris, Kramar, Janez, AND Hodnik, Roman.
"An Analysis of the Spreading of a Holding Pressure by Means of a Pliable Blank Holder with the Controllable Holding Force during a Deep-Drawing Process" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 47 Number 2 (07 July 2017)

Avtorji

Inštitucije

  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia
  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia
  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 47(2001)2, 83-93

One of the most important parameters in the deep-drawing process is the force holding the blank. In a desire to improve the quality with products of complex geometries, forming technology has focused developments on better time-and-place control of the holding force. For a more efficient location control of the holding force it is necessary to replace highly rigid blank holders with pliable or segmented blank holders. This paper discusses the holding conditions when a pliable blank holder of thickness 30 mm presses against the blank with 16 hydraulic cylinders during the process of forming a test product. The results of the research show the local distributions of pressure acting on the blank for a sequence of states during the process, taking into account the changes in the shape and the thickness of the blank.

deep drawing; holders; holding force; applicability analysis;