OGUNLANA, Musbau O.;AKINLABI, Esther T.;ERINOSHO, Mutiu . Analysis of the Influence of Laser Power on the Microstructure and Properties of a Titanium Alloy-Reinforced Boron Carbide Matrix Composite (Ti6Al4V-B4C). Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 63, n.6, p. 363-373, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/analysis-of-the-influence-of-laser-power-on-the-microstructure-and-properties-of-a-titanium-alloy-reinforced-boron-carbide-matrix-composite-ti6al4v-b4c/>. Date accessed: 07 oct. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2016.4159.
Ogunlana, M., Akinlabi, E., & Erinosho, M. (2017). Analysis of the Influence of Laser Power on the Microstructure and Properties of a Titanium Alloy-Reinforced Boron Carbide Matrix Composite (Ti6Al4V-B4C). Strojniški vestnik - Journal of Mechanical Engineering, 63(6), 363-373. doi:http://dx.doi.org/10.5545/sv-jme.2016.4159
@article{sv-jmesv-jme.2016.4159, author = {Musbau O. Ogunlana and Esther T. Akinlabi and Mutiu Erinosho}, title = {Analysis of the Influence of Laser Power on the Microstructure and Properties of a Titanium Alloy-Reinforced Boron Carbide Matrix Composite (Ti6Al4V-B4C)}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {63}, number = {6}, year = {2017}, keywords = {Dry sliding wear; LMD; microhardness; microstructure; Ti6Al4V-B4C composites; X-Ray Diffraction}, abstract = {Laser Metal Deposition (LMD) process is a means of producing metal composites with the aid of a laser beam, ejected onto the substrate with the participating powder and fused together after solidification. In this research work, Ti6Al4V alloy is fused with 20 wt % of B4C in order to form metal matrix composites (MMCs). Using the Ytterbium Fibre Laser System powdered at 3000 W, the laser powers were varied between 800 W and 2400 W while all other supporting process parameters were kept constant. The deposited Ti6Al4V-B4C composites were characterized through the surfacing microstructure, microhardness and dry sliding wear. The microstructural properties of the deposited samples were profound, with a Widmanstätten structure of α-Ti, β-Ti and (α+β) Ti phases. The microhardness tests revealed that the composites deposited with a laser power of 2000 W exhibited the highest hardness value and standard deviation of HV 445 ± 61. Furthermore, characterisation revealed that the sample produced with the laser power of 800 W had the lowest wear loss and wear rate of 35.2 × 10–3 mm3 and 6.42 × 10-4 mm3/Nm. However, the motivation for this work is to improve the material properties of the Ti6Al4V alloy for surface engineering applications.}, issn = {0039-2480}, pages = {363-373}, doi = {10.5545/sv-jme.2016.4159}, url = {https://www.sv-jme.eu/sl/article/analysis-of-the-influence-of-laser-power-on-the-microstructure-and-properties-of-a-titanium-alloy-reinforced-boron-carbide-matrix-composite-ti6al4v-b4c/} }
Ogunlana, M.,Akinlabi, E.,Erinosho, M. 2017 June 63. Analysis of the Influence of Laser Power on the Microstructure and Properties of a Titanium Alloy-Reinforced Boron Carbide Matrix Composite (Ti6Al4V-B4C). Strojniški vestnik - Journal of Mechanical Engineering. [Online] 63:6
%A Ogunlana, Musbau O. %A Akinlabi, Esther T. %A Erinosho, Mutiu %D 2017 %T Analysis of the Influence of Laser Power on the Microstructure and Properties of a Titanium Alloy-Reinforced Boron Carbide Matrix Composite (Ti6Al4V-B4C) %B 2017 %9 Dry sliding wear; LMD; microhardness; microstructure; Ti6Al4V-B4C composites; X-Ray Diffraction %! Analysis of the Influence of Laser Power on the Microstructure and Properties of a Titanium Alloy-Reinforced Boron Carbide Matrix Composite (Ti6Al4V-B4C) %K Dry sliding wear; LMD; microhardness; microstructure; Ti6Al4V-B4C composites; X-Ray Diffraction %X Laser Metal Deposition (LMD) process is a means of producing metal composites with the aid of a laser beam, ejected onto the substrate with the participating powder and fused together after solidification. In this research work, Ti6Al4V alloy is fused with 20 wt % of B4C in order to form metal matrix composites (MMCs). Using the Ytterbium Fibre Laser System powdered at 3000 W, the laser powers were varied between 800 W and 2400 W while all other supporting process parameters were kept constant. The deposited Ti6Al4V-B4C composites were characterized through the surfacing microstructure, microhardness and dry sliding wear. The microstructural properties of the deposited samples were profound, with a Widmanstätten structure of α-Ti, β-Ti and (α+β) Ti phases. The microhardness tests revealed that the composites deposited with a laser power of 2000 W exhibited the highest hardness value and standard deviation of HV 445 ± 61. Furthermore, characterisation revealed that the sample produced with the laser power of 800 W had the lowest wear loss and wear rate of 35.2 × 10–3 mm3 and 6.42 × 10-4 mm3/Nm. However, the motivation for this work is to improve the material properties of the Ti6Al4V alloy for surface engineering applications. %U https://www.sv-jme.eu/sl/article/analysis-of-the-influence-of-laser-power-on-the-microstructure-and-properties-of-a-titanium-alloy-reinforced-boron-carbide-matrix-composite-ti6al4v-b4c/ %0 Journal Article %R 10.5545/sv-jme.2016.4159 %& 363 %P 11 %J Strojniški vestnik - Journal of Mechanical Engineering %V 63 %N 6 %@ 0039-2480 %8 2018-06-27 %7 2018-06-27
Ogunlana, Musbau, Esther T. Akinlabi, & Mutiu Erinosho. "Analysis of the Influence of Laser Power on the Microstructure and Properties of a Titanium Alloy-Reinforced Boron Carbide Matrix Composite (Ti6Al4V-B4C)." Strojniški vestnik - Journal of Mechanical Engineering [Online], 63.6 (2017): 363-373. Web. 07 Oct. 2024
TY - JOUR AU - Ogunlana, Musbau O. AU - Akinlabi, Esther T. AU - Erinosho, Mutiu PY - 2017 TI - Analysis of the Influence of Laser Power on the Microstructure and Properties of a Titanium Alloy-Reinforced Boron Carbide Matrix Composite (Ti6Al4V-B4C) JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2016.4159 KW - Dry sliding wear; LMD; microhardness; microstructure; Ti6Al4V-B4C composites; X-Ray Diffraction N2 - Laser Metal Deposition (LMD) process is a means of producing metal composites with the aid of a laser beam, ejected onto the substrate with the participating powder and fused together after solidification. In this research work, Ti6Al4V alloy is fused with 20 wt % of B4C in order to form metal matrix composites (MMCs). Using the Ytterbium Fibre Laser System powdered at 3000 W, the laser powers were varied between 800 W and 2400 W while all other supporting process parameters were kept constant. The deposited Ti6Al4V-B4C composites were characterized through the surfacing microstructure, microhardness and dry sliding wear. The microstructural properties of the deposited samples were profound, with a Widmanstätten structure of α-Ti, β-Ti and (α+β) Ti phases. The microhardness tests revealed that the composites deposited with a laser power of 2000 W exhibited the highest hardness value and standard deviation of HV 445 ± 61. Furthermore, characterisation revealed that the sample produced with the laser power of 800 W had the lowest wear loss and wear rate of 35.2 × 10–3 mm3 and 6.42 × 10-4 mm3/Nm. However, the motivation for this work is to improve the material properties of the Ti6Al4V alloy for surface engineering applications. UR - https://www.sv-jme.eu/sl/article/analysis-of-the-influence-of-laser-power-on-the-microstructure-and-properties-of-a-titanium-alloy-reinforced-boron-carbide-matrix-composite-ti6al4v-b4c/
@article{{sv-jme}{sv-jme.2016.4159}, author = {Ogunlana, M., Akinlabi, E., Erinosho, M.}, title = {Analysis of the Influence of Laser Power on the Microstructure and Properties of a Titanium Alloy-Reinforced Boron Carbide Matrix Composite (Ti6Al4V-B4C)}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {63}, number = {6}, year = {2017}, doi = {10.5545/sv-jme.2016.4159}, url = {https://www.sv-jme.eu/sl/article/analysis-of-the-influence-of-laser-power-on-the-microstructure-and-properties-of-a-titanium-alloy-reinforced-boron-carbide-matrix-composite-ti6al4v-b4c/} }
TY - JOUR AU - Ogunlana, Musbau O. AU - Akinlabi, Esther T. AU - Erinosho, Mutiu PY - 2018/06/27 TI - Analysis of the Influence of Laser Power on the Microstructure and Properties of a Titanium Alloy-Reinforced Boron Carbide Matrix Composite (Ti6Al4V-B4C) JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 63, No 6 (2017): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2016.4159 KW - Dry sliding wear, LMD, microhardness, microstructure, Ti6Al4V-B4C composites, X-Ray Diffraction N2 - Laser Metal Deposition (LMD) process is a means of producing metal composites with the aid of a laser beam, ejected onto the substrate with the participating powder and fused together after solidification. In this research work, Ti6Al4V alloy is fused with 20 wt % of B4C in order to form metal matrix composites (MMCs). Using the Ytterbium Fibre Laser System powdered at 3000 W, the laser powers were varied between 800 W and 2400 W while all other supporting process parameters were kept constant. The deposited Ti6Al4V-B4C composites were characterized through the surfacing microstructure, microhardness and dry sliding wear. The microstructural properties of the deposited samples were profound, with a Widmanstätten structure of α-Ti, β-Ti and (α+β) Ti phases. The microhardness tests revealed that the composites deposited with a laser power of 2000 W exhibited the highest hardness value and standard deviation of HV 445 ± 61. Furthermore, characterisation revealed that the sample produced with the laser power of 800 W had the lowest wear loss and wear rate of 35.2 × 10–3 mm3 and 6.42 × 10-4 mm3/Nm. However, the motivation for this work is to improve the material properties of the Ti6Al4V alloy for surface engineering applications. UR - https://www.sv-jme.eu/sl/article/analysis-of-the-influence-of-laser-power-on-the-microstructure-and-properties-of-a-titanium-alloy-reinforced-boron-carbide-matrix-composite-ti6al4v-b4c/
Ogunlana, Musbau, Akinlabi, Esther, AND Erinosho, Mutiu. "Analysis of the Influence of Laser Power on the Microstructure and Properties of a Titanium Alloy-Reinforced Boron Carbide Matrix Composite (Ti6Al4V-B4C)" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 63 Number 6 (27 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 63(2017)6, 363-373
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
Laser Metal Deposition (LMD) process is a means of producing metal composites with the aid of a laser beam, ejected onto the substrate with the participating powder and fused together after solidification. In this research work, Ti6Al4V alloy is fused with 20 wt % of B4C in order to form metal matrix composites (MMCs). Using the Ytterbium Fibre Laser System powdered at 3000 W, the laser powers were varied between 800 W and 2400 W while all other supporting process parameters were kept constant. The deposited Ti6Al4V-B4C composites were characterized through the surfacing microstructure, microhardness and dry sliding wear. The microstructural properties of the deposited samples were profound, with a Widmanstätten structure of α-Ti, β-Ti and (α+β) Ti phases. The microhardness tests revealed that the composites deposited with a laser power of 2000 W exhibited the highest hardness value and standard deviation of HV 445 ± 61. Furthermore, characterisation revealed that the sample produced with the laser power of 800 W had the lowest wear loss and wear rate of 35.2 × 10–3 mm3 and 6.42 × 10-4 mm3/Nm. However, the motivation for this work is to improve the material properties of the Ti6Al4V alloy for surface engineering applications.