Bolted Connection of an End-Plate Cantilever Beam: The Distribution of Operating Force

1605 Ogledov
13617 Prenosov
Izvoz citacije: ABNT
OMAN, Simon ;NAGODE, Marko .
Bolted Connection of an End-Plate Cantilever Beam: The Distribution of Operating Force. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 63, n.11, p. 617-627, june 2018. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/bolted-connection-of-an-end-plate-cantilever-beam-the-distribution-of-operating-force/>. Date accessed: 01 mar. 2021. 
doi:http://dx.doi.org/10.5545/sv-jme.2017.4638.
Oman, S., & Nagode, M.
(2017).
Bolted Connection of an End-Plate Cantilever Beam: The Distribution of Operating Force.
Strojniški vestnik - Journal of Mechanical Engineering, 63(11), 617-627.
doi:http://dx.doi.org/10.5545/sv-jme.2017.4638
@article{sv-jmesv-jme.2017.4638,
	author = {Simon  Oman and Marko  Nagode},
	title = {Bolted Connection of an End-Plate Cantilever Beam: The Distribution of Operating Force},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {63},
	number = {11},
	year = {2017},
	keywords = {bolted connection; operating force; bolt pretension; structural steel; finite element method},
	abstract = {This paper presents an alternative method for calculating the operating forces on bolts in the bolted connections of the end-plate cantilever beams. Since operating force reduces pressure between the joined surfaces the influence of the operating force needs to be considered when determining the clamping force. Therefore, correctly defined operational force on each bolt is a base for all further calculations. To evaluate proposed method, results of four existing analytical methods for calculating the operating forces in the bolted connections of the end-plate cantilever beams are compared with the results of the alternative method and the results gained by finite element analyses. Because finite element analysis take into account all influential parameters it is expected that the results obtained by finite element analyses are a good approximation to reality and can serve as a reference when comparing different analytical methods. It turns out that the results of the proposed method coincide with the results of finite element analyses the most. Only the proposed method correctly determines which bolts in the connection are subjected to the highest additional loads.},
	issn = {0039-2480},	pages = {617-627},	doi = {10.5545/sv-jme.2017.4638},
	url = {https://www.sv-jme.eu/sl/article/bolted-connection-of-an-end-plate-cantilever-beam-the-distribution-of-operating-force/}
}
Oman, S.,Nagode, M.
2017 June 63. Bolted Connection of an End-Plate Cantilever Beam: The Distribution of Operating Force. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 63:11
%A Oman, Simon 
%A Nagode, Marko 
%D 2017
%T Bolted Connection of an End-Plate Cantilever Beam: The Distribution of Operating Force
%B 2017
%9 bolted connection; operating force; bolt pretension; structural steel; finite element method
%! Bolted Connection of an End-Plate Cantilever Beam: The Distribution of Operating Force
%K bolted connection; operating force; bolt pretension; structural steel; finite element method
%X This paper presents an alternative method for calculating the operating forces on bolts in the bolted connections of the end-plate cantilever beams. Since operating force reduces pressure between the joined surfaces the influence of the operating force needs to be considered when determining the clamping force. Therefore, correctly defined operational force on each bolt is a base for all further calculations. To evaluate proposed method, results of four existing analytical methods for calculating the operating forces in the bolted connections of the end-plate cantilever beams are compared with the results of the alternative method and the results gained by finite element analyses. Because finite element analysis take into account all influential parameters it is expected that the results obtained by finite element analyses are a good approximation to reality and can serve as a reference when comparing different analytical methods. It turns out that the results of the proposed method coincide with the results of finite element analyses the most. Only the proposed method correctly determines which bolts in the connection are subjected to the highest additional loads.
%U https://www.sv-jme.eu/sl/article/bolted-connection-of-an-end-plate-cantilever-beam-the-distribution-of-operating-force/
%0 Journal Article
%R 10.5545/sv-jme.2017.4638
%& 617
%P 11
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 63
%N 11
%@ 0039-2480
%8 2018-06-27
%7 2018-06-27
Oman, Simon, & Marko  Nagode.
"Bolted Connection of an End-Plate Cantilever Beam: The Distribution of Operating Force." Strojniški vestnik - Journal of Mechanical Engineering [Online], 63.11 (2017): 617-627. Web.  01 Mar. 2021
TY  - JOUR
AU  - Oman, Simon 
AU  - Nagode, Marko 
PY  - 2017
TI  - Bolted Connection of an End-Plate Cantilever Beam: The Distribution of Operating Force
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2017.4638
KW  - bolted connection; operating force; bolt pretension; structural steel; finite element method
N2  - This paper presents an alternative method for calculating the operating forces on bolts in the bolted connections of the end-plate cantilever beams. Since operating force reduces pressure between the joined surfaces the influence of the operating force needs to be considered when determining the clamping force. Therefore, correctly defined operational force on each bolt is a base for all further calculations. To evaluate proposed method, results of four existing analytical methods for calculating the operating forces in the bolted connections of the end-plate cantilever beams are compared with the results of the alternative method and the results gained by finite element analyses. Because finite element analysis take into account all influential parameters it is expected that the results obtained by finite element analyses are a good approximation to reality and can serve as a reference when comparing different analytical methods. It turns out that the results of the proposed method coincide with the results of finite element analyses the most. Only the proposed method correctly determines which bolts in the connection are subjected to the highest additional loads.
UR  - https://www.sv-jme.eu/sl/article/bolted-connection-of-an-end-plate-cantilever-beam-the-distribution-of-operating-force/
@article{{sv-jme}{sv-jme.2017.4638},
	author = {Oman, S., Nagode, M.},
	title = {Bolted Connection of an End-Plate Cantilever Beam: The Distribution of Operating Force},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {63},
	number = {11},
	year = {2017},
	doi = {10.5545/sv-jme.2017.4638},
	url = {https://www.sv-jme.eu/sl/article/bolted-connection-of-an-end-plate-cantilever-beam-the-distribution-of-operating-force/}
}
TY  - JOUR
AU  - Oman, Simon 
AU  - Nagode, Marko 
PY  - 2018/06/27
TI  - Bolted Connection of an End-Plate Cantilever Beam: The Distribution of Operating Force
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 63, No 11 (2017): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2017.4638
KW  - bolted connection, operating force, bolt pretension, structural steel, finite element method
N2  - This paper presents an alternative method for calculating the operating forces on bolts in the bolted connections of the end-plate cantilever beams. Since operating force reduces pressure between the joined surfaces the influence of the operating force needs to be considered when determining the clamping force. Therefore, correctly defined operational force on each bolt is a base for all further calculations. To evaluate proposed method, results of four existing analytical methods for calculating the operating forces in the bolted connections of the end-plate cantilever beams are compared with the results of the alternative method and the results gained by finite element analyses. Because finite element analysis take into account all influential parameters it is expected that the results obtained by finite element analyses are a good approximation to reality and can serve as a reference when comparing different analytical methods. It turns out that the results of the proposed method coincide with the results of finite element analyses the most. Only the proposed method correctly determines which bolts in the connection are subjected to the highest additional loads.
UR  - https://www.sv-jme.eu/sl/article/bolted-connection-of-an-end-plate-cantilever-beam-the-distribution-of-operating-force/
Oman, Simon, AND Nagode, Marko.
"Bolted Connection of an End-Plate Cantilever Beam: The Distribution of Operating Force" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 63 Number 11 (27 June 2018)

Avtorji

Inštitucije

  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia 1

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 63(2017)11, 617-627

https://doi.org/10.5545/sv-jme.2017.4638

This paper presents an alternative method for calculating the operating forces on bolts in the bolted connections of the end-plate cantilever beams. Since operating force reduces pressure between the joined surfaces the influence of the operating force needs to be considered when determining the clamping force. Therefore, correctly defined operational force on each bolt is a base for all further calculations. To evaluate proposed method, results of four existing analytical methods for calculating the operating forces in the bolted connections of the end-plate cantilever beams are compared with the results of the alternative method and the results gained by finite element analyses. Because finite element analysis take into account all influential parameters it is expected that the results obtained by finite element analyses are a good approximation to reality and can serve as a reference when comparing different analytical methods. It turns out that the results of the proposed method coincide with the results of finite element analyses the most. Only the proposed method correctly determines which bolts in the connection are subjected to the highest additional loads.

bolted connection; operating force; bolt pretension; structural steel; finite element method