Bypass effect in high performance heat sinks

2041 Ogledov
1304 Prenosov
Izvoz citacije: ABNT
PRSTIC, Suzana ;IYENGAR, Madhusudan ;BAR-COHEN, Avram .
Bypass effect in high performance heat sinks. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 47, n.8, p. 441-448, july 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/bypass-effect-in-high-performance-heat-sinks/>. Date accessed: 11 dec. 2024. 
doi:http://dx.doi.org/.
Prstic, S., Iyengar, M., & Bar-Cohen, A.
(2001).
Bypass effect in high performance heat sinks.
Strojniški vestnik - Journal of Mechanical Engineering, 47(8), 441-448.
doi:http://dx.doi.org/
@article{.,
	author = {Suzana  Prstic and Madhusudan  Iyengar and Avram  Bar-Cohen},
	title = {Bypass effect in high performance heat sinks},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {47},
	number = {8},
	year = {2001},
	keywords = {fluid dynamics; heat transfer; modeling; },
	abstract = {Studies using commercial computational fluid dynamics software, running on a supercomputer, were carried out to investigate the effects of fin density, inlet duct velocity, and clearance area ratio, an the extent of flow bypass and its impact on the thermal performance of the heat sink. Flow bypass was found to increase with increasing fin density and clearance, while remaining relatively insensitive to inlet duct velocity. An optimum geometry, for a fixed inlet duct velocity, bypass clearance, fixed heat sink volume, and constant thickness, was determined.},
	issn = {0039-2480},	pages = {441-448},	doi = {},
	url = {https://www.sv-jme.eu/sl/article/bypass-effect-in-high-performance-heat-sinks/}
}
Prstic, S.,Iyengar, M.,Bar-Cohen, A.
2001 July 47. Bypass effect in high performance heat sinks. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 47:8
%A Prstic, Suzana 
%A Iyengar, Madhusudan 
%A Bar-Cohen, Avram 
%D 2001
%T Bypass effect in high performance heat sinks
%B 2001
%9 fluid dynamics; heat transfer; modeling; 
%! Bypass effect in high performance heat sinks
%K fluid dynamics; heat transfer; modeling; 
%X Studies using commercial computational fluid dynamics software, running on a supercomputer, were carried out to investigate the effects of fin density, inlet duct velocity, and clearance area ratio, an the extent of flow bypass and its impact on the thermal performance of the heat sink. Flow bypass was found to increase with increasing fin density and clearance, while remaining relatively insensitive to inlet duct velocity. An optimum geometry, for a fixed inlet duct velocity, bypass clearance, fixed heat sink volume, and constant thickness, was determined.
%U https://www.sv-jme.eu/sl/article/bypass-effect-in-high-performance-heat-sinks/
%0 Journal Article
%R 
%& 441
%P 8
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 47
%N 8
%@ 0039-2480
%8 2017-07-07
%7 2017-07-07
Prstic, Suzana, Madhusudan  Iyengar, & Avram  Bar-Cohen.
"Bypass effect in high performance heat sinks." Strojniški vestnik - Journal of Mechanical Engineering [Online], 47.8 (2001): 441-448. Web.  11 Dec. 2024
TY  - JOUR
AU  - Prstic, Suzana 
AU  - Iyengar, Madhusudan 
AU  - Bar-Cohen, Avram 
PY  - 2001
TI  - Bypass effect in high performance heat sinks
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - fluid dynamics; heat transfer; modeling; 
N2  - Studies using commercial computational fluid dynamics software, running on a supercomputer, were carried out to investigate the effects of fin density, inlet duct velocity, and clearance area ratio, an the extent of flow bypass and its impact on the thermal performance of the heat sink. Flow bypass was found to increase with increasing fin density and clearance, while remaining relatively insensitive to inlet duct velocity. An optimum geometry, for a fixed inlet duct velocity, bypass clearance, fixed heat sink volume, and constant thickness, was determined.
UR  - https://www.sv-jme.eu/sl/article/bypass-effect-in-high-performance-heat-sinks/
@article{{}{.},
	author = {Prstic, S., Iyengar, M., Bar-Cohen, A.},
	title = {Bypass effect in high performance heat sinks},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {47},
	number = {8},
	year = {2001},
	doi = {},
	url = {https://www.sv-jme.eu/sl/article/bypass-effect-in-high-performance-heat-sinks/}
}
TY  - JOUR
AU  - Prstic, Suzana 
AU  - Iyengar, Madhusudan 
AU  - Bar-Cohen, Avram 
PY  - 2017/07/07
TI  - Bypass effect in high performance heat sinks
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 47, No 8 (2001): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - fluid dynamics, heat transfer, modeling, 
N2  - Studies using commercial computational fluid dynamics software, running on a supercomputer, were carried out to investigate the effects of fin density, inlet duct velocity, and clearance area ratio, an the extent of flow bypass and its impact on the thermal performance of the heat sink. Flow bypass was found to increase with increasing fin density and clearance, while remaining relatively insensitive to inlet duct velocity. An optimum geometry, for a fixed inlet duct velocity, bypass clearance, fixed heat sink volume, and constant thickness, was determined.
UR  - https://www.sv-jme.eu/sl/article/bypass-effect-in-high-performance-heat-sinks/
Prstic, Suzana, Iyengar, Madhusudan, AND Bar-Cohen, Avram.
"Bypass effect in high performance heat sinks" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 47 Number 8 (07 July 2017)

Avtorji

Inštitucije

  • University of Minnesota, Laboratory of the Thermal Management of Electronics, Minneapolis, USA
  • University of Minnesota, Laboratory of the Thermal Management of Electronics, Minneapolis, USA
  • University of Minnesota, Laboratory of the Thermal Management of Electronics, Minneapolis, USA

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 47(2001)8, 441-448
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

Studies using commercial computational fluid dynamics software, running on a supercomputer, were carried out to investigate the effects of fin density, inlet duct velocity, and clearance area ratio, an the extent of flow bypass and its impact on the thermal performance of the heat sink. Flow bypass was found to increase with increasing fin density and clearance, while remaining relatively insensitive to inlet duct velocity. An optimum geometry, for a fixed inlet duct velocity, bypass clearance, fixed heat sink volume, and constant thickness, was determined.

fluid dynamics; heat transfer; modeling;