Calibration of Coordinate Measuring Devices in the Laboratory Conditions

1637 Ogledov
796 Prenosov
Izvoz citacije: ABNT
AČKO, Bojan .
Calibration of Coordinate Measuring Devices in the Laboratory Conditions. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 44, n.1-2, p. 41-46, november 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/calibration-of-coordinate-measuring-devices-in-the-laboratory-conditions/>. Date accessed: 29 mar. 2024. 
doi:http://dx.doi.org/.
Ačko, B.
(1998).
Calibration of Coordinate Measuring Devices in the Laboratory Conditions.
Strojniški vestnik - Journal of Mechanical Engineering, 44(1-2), 41-46.
doi:http://dx.doi.org/
@article{.,
	author = {Bojan  Ačko},
	title = {Calibration of Coordinate Measuring Devices in the Laboratory Conditions},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {44},
	number = {1-2},
	year = {1998},
	keywords = {coordinate measuring devices; calibration of devices; traceability; gauge blocks; laser interferometer; },
	abstract = {The aim of the paper is to emphasise the problem of the traceability of measurement in the three-coordinate measuring technique. A proposal for a new method for the calibration of three-coordinate measuring machines is introduced in the paper. In contrast to the existing calibration methods, the introduced method is totally traceable. Measurements used in the new method are performed simultaneously with a laser interferometer and gauge blocks - standards of measurement. It is very important that traceability to the primary standard for length can be assured for both measuring devices. The method is completely adopted to the operational principle of the coordinate measuring machine and assures exact analysis of the influences of geometrical deviations on the measuring error. It was tested in the laboratory for production measurement. The test included comparison with the existing calibration methods. It was found that the repeatibility of calibration results was much better as with the existing method, which was developed from the method for the machine tool check.},
	issn = {0039-2480},	pages = {41-46},	doi = {},
	url = {https://www.sv-jme.eu/sl/article/calibration-of-coordinate-measuring-devices-in-the-laboratory-conditions/}
}
Ačko, B.
1998 November 44. Calibration of Coordinate Measuring Devices in the Laboratory Conditions. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 44:1-2
%A Ačko, Bojan 
%D 1998
%T Calibration of Coordinate Measuring Devices in the Laboratory Conditions
%B 1998
%9 coordinate measuring devices; calibration of devices; traceability; gauge blocks; laser interferometer; 
%! Calibration of Coordinate Measuring Devices in the Laboratory Conditions
%K coordinate measuring devices; calibration of devices; traceability; gauge blocks; laser interferometer; 
%X The aim of the paper is to emphasise the problem of the traceability of measurement in the three-coordinate measuring technique. A proposal for a new method for the calibration of three-coordinate measuring machines is introduced in the paper. In contrast to the existing calibration methods, the introduced method is totally traceable. Measurements used in the new method are performed simultaneously with a laser interferometer and gauge blocks - standards of measurement. It is very important that traceability to the primary standard for length can be assured for both measuring devices. The method is completely adopted to the operational principle of the coordinate measuring machine and assures exact analysis of the influences of geometrical deviations on the measuring error. It was tested in the laboratory for production measurement. The test included comparison with the existing calibration methods. It was found that the repeatibility of calibration results was much better as with the existing method, which was developed from the method for the machine tool check.
%U https://www.sv-jme.eu/sl/article/calibration-of-coordinate-measuring-devices-in-the-laboratory-conditions/
%0 Journal Article
%R 
%& 41
%P 6
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 44
%N 1-2
%@ 0039-2480
%8 2017-11-11
%7 2017-11-11
Ačko, Bojan.
"Calibration of Coordinate Measuring Devices in the Laboratory Conditions." Strojniški vestnik - Journal of Mechanical Engineering [Online], 44.1-2 (1998): 41-46. Web.  29 Mar. 2024
TY  - JOUR
AU  - Ačko, Bojan 
PY  - 1998
TI  - Calibration of Coordinate Measuring Devices in the Laboratory Conditions
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - coordinate measuring devices; calibration of devices; traceability; gauge blocks; laser interferometer; 
N2  - The aim of the paper is to emphasise the problem of the traceability of measurement in the three-coordinate measuring technique. A proposal for a new method for the calibration of three-coordinate measuring machines is introduced in the paper. In contrast to the existing calibration methods, the introduced method is totally traceable. Measurements used in the new method are performed simultaneously with a laser interferometer and gauge blocks - standards of measurement. It is very important that traceability to the primary standard for length can be assured for both measuring devices. The method is completely adopted to the operational principle of the coordinate measuring machine and assures exact analysis of the influences of geometrical deviations on the measuring error. It was tested in the laboratory for production measurement. The test included comparison with the existing calibration methods. It was found that the repeatibility of calibration results was much better as with the existing method, which was developed from the method for the machine tool check.
UR  - https://www.sv-jme.eu/sl/article/calibration-of-coordinate-measuring-devices-in-the-laboratory-conditions/
@article{{}{.},
	author = {Ačko, B.},
	title = {Calibration of Coordinate Measuring Devices in the Laboratory Conditions},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {44},
	number = {1-2},
	year = {1998},
	doi = {},
	url = {https://www.sv-jme.eu/sl/article/calibration-of-coordinate-measuring-devices-in-the-laboratory-conditions/}
}
TY  - JOUR
AU  - Ačko, Bojan 
PY  - 2017/11/11
TI  - Calibration of Coordinate Measuring Devices in the Laboratory Conditions
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 44, No 1-2 (1998): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - coordinate measuring devices, calibration of devices, traceability, gauge blocks, laser interferometer, 
N2  - The aim of the paper is to emphasise the problem of the traceability of measurement in the three-coordinate measuring technique. A proposal for a new method for the calibration of three-coordinate measuring machines is introduced in the paper. In contrast to the existing calibration methods, the introduced method is totally traceable. Measurements used in the new method are performed simultaneously with a laser interferometer and gauge blocks - standards of measurement. It is very important that traceability to the primary standard for length can be assured for both measuring devices. The method is completely adopted to the operational principle of the coordinate measuring machine and assures exact analysis of the influences of geometrical deviations on the measuring error. It was tested in the laboratory for production measurement. The test included comparison with the existing calibration methods. It was found that the repeatibility of calibration results was much better as with the existing method, which was developed from the method for the machine tool check.
UR  - https://www.sv-jme.eu/sl/article/calibration-of-coordinate-measuring-devices-in-the-laboratory-conditions/
Ačko, Bojan"Calibration of Coordinate Measuring Devices in the Laboratory Conditions" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 44 Number 1-2 (11 November 2017)

Avtorji

Inštitucije

  • University of Maribor, Faculty of Mechanical Engineering, Slovenia

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 44(1998)1-2, 41-46
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

The aim of the paper is to emphasise the problem of the traceability of measurement in the three-coordinate measuring technique. A proposal for a new method for the calibration of three-coordinate measuring machines is introduced in the paper. In contrast to the existing calibration methods, the introduced method is totally traceable. Measurements used in the new method are performed simultaneously with a laser interferometer and gauge blocks - standards of measurement. It is very important that traceability to the primary standard for length can be assured for both measuring devices. The method is completely adopted to the operational principle of the coordinate measuring machine and assures exact analysis of the influences of geometrical deviations on the measuring error. It was tested in the laboratory for production measurement. The test included comparison with the existing calibration methods. It was found that the repeatibility of calibration results was much better as with the existing method, which was developed from the method for the machine tool check.

coordinate measuring devices; calibration of devices; traceability; gauge blocks; laser interferometer;