Characterization of Impact Damage in Composite Plates

2605 Ogledov
1224 Prenosov
Izvoz citacije: ABNT
MURAT, Bibi Intan Suraya;FROMME, Paul ;ENDRIZZEI, Marco ;OLIVO, Alessandro .
Characterization of Impact Damage in Composite Plates. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 64, n.11, p. 672-679, november 2018. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/characterization-of-impact-damage-in-composite-plates/>. Date accessed: 28 mar. 2024. 
doi:http://dx.doi.org/10.5545/sv-jme.2017.5186.
Murat, B., Fromme, P., Endrizzei, M., & Olivo, A.
(2018).
Characterization of Impact Damage in Composite Plates.
Strojniški vestnik - Journal of Mechanical Engineering, 64(11), 672-679.
doi:http://dx.doi.org/10.5545/sv-jme.2017.5186
@article{sv-jmesv-jme.2017.5186,
	author = {Bibi Intan Suraya Murat and Paul  Fromme and Marco  Endrizzei and Alessandro  Olivo},
	title = {Characterization of Impact Damage in Composite Plates},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {64},
	number = {11},
	year = {2018},
	keywords = {low-velocity impact; composite plates; X-ray; ultrasonic C-scan; guided waves},
	abstract = {Low-velocity impact on composites typically produces a barely visible damage at the impacted surface. The internal defects can be complex, consisting of multimode damage and the extent of the impact damage normally spreads across the thickness under the impacted surface. The characterization of impact damage in composites can be very complicated and varies for every different composite structure. In this paper, independent characterization of the low-velocity impact damage on carbon-fiber/epoxy plates using three different non-destructive evaluation methods were used. The goal is to demonstrate the ability of guided ultrasonic waves imaging technique and compared to the more widely employed techniques such as X-ray imaging and ultrasonic immersion C-scan. It was demonstrated that the low frequency A0 guided ultrasonic wave mode generated by a low-cost piezoelectric transducer can be successfully employed to detect impact damage in composite plates and managed to estimate the size and shape of the impact damage.},
	issn = {0039-2480},	pages = {672-679},	doi = {10.5545/sv-jme.2017.5186},
	url = {https://www.sv-jme.eu/sl/article/characterization-of-impact-damage-in-composite-plates/}
}
Murat, B.,Fromme, P.,Endrizzei, M.,Olivo, A.
2018 November 64. Characterization of Impact Damage in Composite Plates. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 64:11
%A Murat, Bibi Intan Suraya
%A Fromme, Paul 
%A Endrizzei, Marco 
%A Olivo, Alessandro 
%D 2018
%T Characterization of Impact Damage in Composite Plates
%B 2018
%9 low-velocity impact; composite plates; X-ray; ultrasonic C-scan; guided waves
%! Characterization of Impact Damage in Composite Plates
%K low-velocity impact; composite plates; X-ray; ultrasonic C-scan; guided waves
%X Low-velocity impact on composites typically produces a barely visible damage at the impacted surface. The internal defects can be complex, consisting of multimode damage and the extent of the impact damage normally spreads across the thickness under the impacted surface. The characterization of impact damage in composites can be very complicated and varies for every different composite structure. In this paper, independent characterization of the low-velocity impact damage on carbon-fiber/epoxy plates using three different non-destructive evaluation methods were used. The goal is to demonstrate the ability of guided ultrasonic waves imaging technique and compared to the more widely employed techniques such as X-ray imaging and ultrasonic immersion C-scan. It was demonstrated that the low frequency A0 guided ultrasonic wave mode generated by a low-cost piezoelectric transducer can be successfully employed to detect impact damage in composite plates and managed to estimate the size and shape of the impact damage.
%U https://www.sv-jme.eu/sl/article/characterization-of-impact-damage-in-composite-plates/
%0 Journal Article
%R 10.5545/sv-jme.2017.5186
%& 672
%P 8
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 64
%N 11
%@ 0039-2480
%8 2018-11-06
%7 2018-11-06
Murat, Bibi, Paul  Fromme, Marco  Endrizzei, & Alessandro  Olivo.
"Characterization of Impact Damage in Composite Plates." Strojniški vestnik - Journal of Mechanical Engineering [Online], 64.11 (2018): 672-679. Web.  28 Mar. 2024
TY  - JOUR
AU  - Murat, Bibi Intan Suraya
AU  - Fromme, Paul 
AU  - Endrizzei, Marco 
AU  - Olivo, Alessandro 
PY  - 2018
TI  - Characterization of Impact Damage in Composite Plates
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2017.5186
KW  - low-velocity impact; composite plates; X-ray; ultrasonic C-scan; guided waves
N2  - Low-velocity impact on composites typically produces a barely visible damage at the impacted surface. The internal defects can be complex, consisting of multimode damage and the extent of the impact damage normally spreads across the thickness under the impacted surface. The characterization of impact damage in composites can be very complicated and varies for every different composite structure. In this paper, independent characterization of the low-velocity impact damage on carbon-fiber/epoxy plates using three different non-destructive evaluation methods were used. The goal is to demonstrate the ability of guided ultrasonic waves imaging technique and compared to the more widely employed techniques such as X-ray imaging and ultrasonic immersion C-scan. It was demonstrated that the low frequency A0 guided ultrasonic wave mode generated by a low-cost piezoelectric transducer can be successfully employed to detect impact damage in composite plates and managed to estimate the size and shape of the impact damage.
UR  - https://www.sv-jme.eu/sl/article/characterization-of-impact-damage-in-composite-plates/
@article{{sv-jme}{sv-jme.2017.5186},
	author = {Murat, B., Fromme, P., Endrizzei, M., Olivo, A.},
	title = {Characterization of Impact Damage in Composite Plates},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {64},
	number = {11},
	year = {2018},
	doi = {10.5545/sv-jme.2017.5186},
	url = {https://www.sv-jme.eu/sl/article/characterization-of-impact-damage-in-composite-plates/}
}
TY  - JOUR
AU  - Murat, Bibi Intan Suraya
AU  - Fromme, Paul 
AU  - Endrizzei, Marco 
AU  - Olivo, Alessandro 
PY  - 2018/11/06
TI  - Characterization of Impact Damage in Composite Plates
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 64, No 11 (2018): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2017.5186
KW  - low-velocity impact, composite plates, X-ray, ultrasonic C-scan, guided waves
N2  - Low-velocity impact on composites typically produces a barely visible damage at the impacted surface. The internal defects can be complex, consisting of multimode damage and the extent of the impact damage normally spreads across the thickness under the impacted surface. The characterization of impact damage in composites can be very complicated and varies for every different composite structure. In this paper, independent characterization of the low-velocity impact damage on carbon-fiber/epoxy plates using three different non-destructive evaluation methods were used. The goal is to demonstrate the ability of guided ultrasonic waves imaging technique and compared to the more widely employed techniques such as X-ray imaging and ultrasonic immersion C-scan. It was demonstrated that the low frequency A0 guided ultrasonic wave mode generated by a low-cost piezoelectric transducer can be successfully employed to detect impact damage in composite plates and managed to estimate the size and shape of the impact damage.
UR  - https://www.sv-jme.eu/sl/article/characterization-of-impact-damage-in-composite-plates/
Murat, Bibi, Fromme, Paul, Endrizzei, Marco, AND Olivo, Alessandro.
"Characterization of Impact Damage in Composite Plates" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 64 Number 11 (06 November 2018)

Avtorji

Inštitucije

  • University Technology MARA, Faculty of Mechanical Engineering, Malaysia 1
  • University College London, Department of Mechanical Engineering, UK 2
  • University College London, Department of Medical Physics and Biomedical Engineering, UK 3

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 64(2018)11, 672-679
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

https://doi.org/10.5545/sv-jme.2017.5186

Low-velocity impact on composites typically produces a barely visible damage at the impacted surface. The internal defects can be complex, consisting of multimode damage and the extent of the impact damage normally spreads across the thickness under the impacted surface. The characterization of impact damage in composites can be very complicated and varies for every different composite structure. In this paper, independent characterization of the low-velocity impact damage on carbon-fiber/epoxy plates using three different non-destructive evaluation methods were used. The goal is to demonstrate the ability of guided ultrasonic waves imaging technique and compared to the more widely employed techniques such as X-ray imaging and ultrasonic immersion C-scan. It was demonstrated that the low frequency A0 guided ultrasonic wave mode generated by a low-cost piezoelectric transducer can be successfully employed to detect impact damage in composite plates and managed to estimate the size and shape of the impact damage.

low-velocity impact; composite plates; X-ray; ultrasonic C-scan; guided waves