TOPGÜL, Tolga . Design, Manufacturing, and Thermodynamic Analysis of a Gamma-type Stirling Engine Powered by Solar Energy. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 68, n.12, p. 757-770, december 2022. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/design-manufacturing-and-thermodynamic-analysis-of-a-gamma-type-stirling-engine-powered-by-solar-energy/>. Date accessed: 15 oct. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2022.368.
Topgül, T. (2022). Design, Manufacturing, and Thermodynamic Analysis of a Gamma-type Stirling Engine Powered by Solar Energy. Strojniški vestnik - Journal of Mechanical Engineering, 68(12), 757-770. doi:http://dx.doi.org/10.5545/sv-jme.2022.368
@article{sv-jmesv-jme.2022.368, author = {Tolga Topgül}, title = {Design, Manufacturing, and Thermodynamic Analysis of a Gamma-type Stirling Engine Powered by Solar Energy}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {68}, number = {12}, year = {2022}, keywords = {γ-type Stirling engine; operating parameters; engine performance; thermal efficiency; nodal analysis; }, abstract = {Stirling engines are external combustion engines. This feature eliminates the possible dependency of the engine on a specific energy resource and allows it to work with diverse energy sources, especially solar and other renewable energy sources. Also, Stirling engines could be built in different configurations that have a significant impact on the engine performance. With these aspects, Stirling engines have attracted the attention of researchers. In this study, firstly, a double-cylinder V-type air compressor has been converted to a gamma-type Stirling engine. The block, cylinders, connecting rods, and the crank mechanism of the compressor have been used in the converted engine. For this reason, the air compressor has determined some features of the Stirling engine, such as phase angle, strokes, and cylinder diameter. Other parts of the engine, such as piston, cylinder head, displacer, and displacer cylinder have been manufactured. Secondly, the optimum operating parameters to provide maximum thermal efficiency have been investigated using the nodal thermodynamic analysis considering that the engine is powered by solar energy. In the analysis, helium as the working fluid is used due to its suitable thermodynamic features and safety usage. The optimum working fluid mass and engine speed have been determined as 0.15 g and 100 rad/s for all temperatures (750, 800, and 850 K). Also, the optimum displacer height has been preferred as 190 mm since there is no significant improvement in the thermal efficiency after this dimension. The maximum thermal efficiency has been obtained as 46.5%.}, issn = {0039-2480}, pages = {757-770}, doi = {10.5545/sv-jme.2022.368}, url = {https://www.sv-jme.eu/sl/article/design-manufacturing-and-thermodynamic-analysis-of-a-gamma-type-stirling-engine-powered-by-solar-energy/} }
Topgül, T. 2022 December 68. Design, Manufacturing, and Thermodynamic Analysis of a Gamma-type Stirling Engine Powered by Solar Energy. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 68:12
%A Topgül, Tolga %D 2022 %T Design, Manufacturing, and Thermodynamic Analysis of a Gamma-type Stirling Engine Powered by Solar Energy %B 2022 %9 γ-type Stirling engine; operating parameters; engine performance; thermal efficiency; nodal analysis; %! Design, Manufacturing, and Thermodynamic Analysis of a Gamma-type Stirling Engine Powered by Solar Energy %K γ-type Stirling engine; operating parameters; engine performance; thermal efficiency; nodal analysis; %X Stirling engines are external combustion engines. This feature eliminates the possible dependency of the engine on a specific energy resource and allows it to work with diverse energy sources, especially solar and other renewable energy sources. Also, Stirling engines could be built in different configurations that have a significant impact on the engine performance. With these aspects, Stirling engines have attracted the attention of researchers. In this study, firstly, a double-cylinder V-type air compressor has been converted to a gamma-type Stirling engine. The block, cylinders, connecting rods, and the crank mechanism of the compressor have been used in the converted engine. For this reason, the air compressor has determined some features of the Stirling engine, such as phase angle, strokes, and cylinder diameter. Other parts of the engine, such as piston, cylinder head, displacer, and displacer cylinder have been manufactured. Secondly, the optimum operating parameters to provide maximum thermal efficiency have been investigated using the nodal thermodynamic analysis considering that the engine is powered by solar energy. In the analysis, helium as the working fluid is used due to its suitable thermodynamic features and safety usage. The optimum working fluid mass and engine speed have been determined as 0.15 g and 100 rad/s for all temperatures (750, 800, and 850 K). Also, the optimum displacer height has been preferred as 190 mm since there is no significant improvement in the thermal efficiency after this dimension. The maximum thermal efficiency has been obtained as 46.5%. %U https://www.sv-jme.eu/sl/article/design-manufacturing-and-thermodynamic-analysis-of-a-gamma-type-stirling-engine-powered-by-solar-energy/ %0 Journal Article %R 10.5545/sv-jme.2022.368 %& 757 %P 14 %J Strojniški vestnik - Journal of Mechanical Engineering %V 68 %N 12 %@ 0039-2480 %8 2022-12-16 %7 2022-12-16
Topgül, Tolga. "Design, Manufacturing, and Thermodynamic Analysis of a Gamma-type Stirling Engine Powered by Solar Energy." Strojniški vestnik - Journal of Mechanical Engineering [Online], 68.12 (2022): 757-770. Web. 15 Oct. 2024
TY - JOUR AU - Topgül, Tolga PY - 2022 TI - Design, Manufacturing, and Thermodynamic Analysis of a Gamma-type Stirling Engine Powered by Solar Energy JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2022.368 KW - γ-type Stirling engine; operating parameters; engine performance; thermal efficiency; nodal analysis; N2 - Stirling engines are external combustion engines. This feature eliminates the possible dependency of the engine on a specific energy resource and allows it to work with diverse energy sources, especially solar and other renewable energy sources. Also, Stirling engines could be built in different configurations that have a significant impact on the engine performance. With these aspects, Stirling engines have attracted the attention of researchers. In this study, firstly, a double-cylinder V-type air compressor has been converted to a gamma-type Stirling engine. The block, cylinders, connecting rods, and the crank mechanism of the compressor have been used in the converted engine. For this reason, the air compressor has determined some features of the Stirling engine, such as phase angle, strokes, and cylinder diameter. Other parts of the engine, such as piston, cylinder head, displacer, and displacer cylinder have been manufactured. Secondly, the optimum operating parameters to provide maximum thermal efficiency have been investigated using the nodal thermodynamic analysis considering that the engine is powered by solar energy. In the analysis, helium as the working fluid is used due to its suitable thermodynamic features and safety usage. The optimum working fluid mass and engine speed have been determined as 0.15 g and 100 rad/s for all temperatures (750, 800, and 850 K). Also, the optimum displacer height has been preferred as 190 mm since there is no significant improvement in the thermal efficiency after this dimension. The maximum thermal efficiency has been obtained as 46.5%. UR - https://www.sv-jme.eu/sl/article/design-manufacturing-and-thermodynamic-analysis-of-a-gamma-type-stirling-engine-powered-by-solar-energy/
@article{{sv-jme}{sv-jme.2022.368}, author = {Topgül, T.}, title = {Design, Manufacturing, and Thermodynamic Analysis of a Gamma-type Stirling Engine Powered by Solar Energy}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {68}, number = {12}, year = {2022}, doi = {10.5545/sv-jme.2022.368}, url = {https://www.sv-jme.eu/sl/article/design-manufacturing-and-thermodynamic-analysis-of-a-gamma-type-stirling-engine-powered-by-solar-energy/} }
TY - JOUR AU - Topgül, Tolga PY - 2022/12/16 TI - Design, Manufacturing, and Thermodynamic Analysis of a Gamma-type Stirling Engine Powered by Solar Energy JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 68, No 12 (2022): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2022.368 KW - γ-type Stirling engine, operating parameters, engine performance, thermal efficiency, nodal analysis, N2 - Stirling engines are external combustion engines. This feature eliminates the possible dependency of the engine on a specific energy resource and allows it to work with diverse energy sources, especially solar and other renewable energy sources. Also, Stirling engines could be built in different configurations that have a significant impact on the engine performance. With these aspects, Stirling engines have attracted the attention of researchers. In this study, firstly, a double-cylinder V-type air compressor has been converted to a gamma-type Stirling engine. The block, cylinders, connecting rods, and the crank mechanism of the compressor have been used in the converted engine. For this reason, the air compressor has determined some features of the Stirling engine, such as phase angle, strokes, and cylinder diameter. Other parts of the engine, such as piston, cylinder head, displacer, and displacer cylinder have been manufactured. Secondly, the optimum operating parameters to provide maximum thermal efficiency have been investigated using the nodal thermodynamic analysis considering that the engine is powered by solar energy. In the analysis, helium as the working fluid is used due to its suitable thermodynamic features and safety usage. The optimum working fluid mass and engine speed have been determined as 0.15 g and 100 rad/s for all temperatures (750, 800, and 850 K). Also, the optimum displacer height has been preferred as 190 mm since there is no significant improvement in the thermal efficiency after this dimension. The maximum thermal efficiency has been obtained as 46.5%. UR - https://www.sv-jme.eu/sl/article/design-manufacturing-and-thermodynamic-analysis-of-a-gamma-type-stirling-engine-powered-by-solar-energy/
Topgül, Tolga"Design, Manufacturing, and Thermodynamic Analysis of a Gamma-type Stirling Engine Powered by Solar Energy" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 68 Number 12 (16 December 2022)
Strojniški vestnik - Journal of Mechanical Engineering 68(2022)12, 757-770
© The Authors 2022. CC BY 4.0 Int.
Stirling engines are external combustion engines. This feature eliminates the possible dependency of the engine on a specific energy resource and allows it to work with diverse energy sources, especially solar and other renewable energy sources. Also, Stirling engines could be built in different configurations that have a significant impact on the engine performance. With these aspects, Stirling engines have attracted the attention of researchers. In this study, firstly, a double-cylinder V-type air compressor has been converted to a gamma-type Stirling engine. The block, cylinders, connecting rods, and the crank mechanism of the compressor have been used in the converted engine. For this reason, the air compressor has determined some features of the Stirling engine, such as phase angle, strokes, and cylinder diameter. Other parts of the engine, such as piston, cylinder head, displacer, and displacer cylinder have been manufactured. Secondly, the optimum operating parameters to provide maximum thermal efficiency have been investigated using the nodal thermodynamic analysis considering that the engine is powered by solar energy. In the analysis, helium as the working fluid is used due to its suitable thermodynamic features and safety usage. The optimum working fluid mass and engine speed have been determined as 0.15 g and 100 rad/s for all temperatures (750, 800, and 850 K). Also, the optimum displacer height has been preferred as 190 mm since there is no significant improvement in the thermal efficiency after this dimension. The maximum thermal efficiency has been obtained as 46.5%.