LEÓN, J. ;LUIS, C.J. ;LURI, R. ;REYERO, J. . Determination of the neutral point in flat rolling processes. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 53, n.11, p. 747-754, august 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/determination-of-the-neutral-point-in-flat-rolling-processes/>. Date accessed: 19 apr. 2024. doi:http://dx.doi.org/.
León, J., Luis, C., Luri, R., & Reyero, J. (2007). Determination of the neutral point in flat rolling processes. Strojniški vestnik - Journal of Mechanical Engineering, 53(11), 747-754. doi:http://dx.doi.org/
@article{.,
author = {J. León and C.J. Luis and R. Luri and J. Reyero},
title = {Determination of the neutral point in flat rolling processes},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {53},
number = {11},
year = {2007},
keywords = {rolling; modeling; finite element methods; SLAB method; },
abstract = {Studies of rolling processes are very interesting because a large quantity of produced parts are rolled at some point in their fabrication. In this paper the flat rolling process is analyzed using the FEM and an analytical method in order to determine how the reduction, the velocity of the strip and the frictional coefficient affect the position of the neutral point. Both the analytical and FEM results are compared and we can say that analytical equations and the FEM modeling are in good agreement. The plane strain assumption is used in the FEM and in the analytical study, so, in order to study stress and strain, a two-dimensional mesh was considered for all the models. With such models, the deflection of the rolls for different strip thicknesses can be determined. The studied configuration is a four-high rolling system and the rolls and the strip are meshed in order to obtain their strain, stress, displacements and velocity fields.},
issn = {0039-2480}, pages = {747-754}, doi = {},
url = {https://www.sv-jme.eu/sl/article/determination-of-the-neutral-point-in-flat-rolling-processes/}
}
León, J.,Luis, C.,Luri, R.,Reyero, J. 2007 August 53. Determination of the neutral point in flat rolling processes. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 53:11
%A León, J. %A Luis, C.J. %A Luri, R. %A Reyero, J. %D 2007 %T Determination of the neutral point in flat rolling processes %B 2007 %9 rolling; modeling; finite element methods; SLAB method; %! Determination of the neutral point in flat rolling processes %K rolling; modeling; finite element methods; SLAB method; %X Studies of rolling processes are very interesting because a large quantity of produced parts are rolled at some point in their fabrication. In this paper the flat rolling process is analyzed using the FEM and an analytical method in order to determine how the reduction, the velocity of the strip and the frictional coefficient affect the position of the neutral point. Both the analytical and FEM results are compared and we can say that analytical equations and the FEM modeling are in good agreement. The plane strain assumption is used in the FEM and in the analytical study, so, in order to study stress and strain, a two-dimensional mesh was considered for all the models. With such models, the deflection of the rolls for different strip thicknesses can be determined. The studied configuration is a four-high rolling system and the rolls and the strip are meshed in order to obtain their strain, stress, displacements and velocity fields. %U https://www.sv-jme.eu/sl/article/determination-of-the-neutral-point-in-flat-rolling-processes/ %0 Journal Article %R %& 747 %P 8 %J Strojniški vestnik - Journal of Mechanical Engineering %V 53 %N 11 %@ 0039-2480 %8 2017-08-18 %7 2017-08-18
León, J., C.J. Luis, R. Luri, & J. Reyero. "Determination of the neutral point in flat rolling processes." Strojniški vestnik - Journal of Mechanical Engineering [Online], 53.11 (2007): 747-754. Web. 19 Apr. 2024
TY - JOUR AU - León, J. AU - Luis, C.J. AU - Luri, R. AU - Reyero, J. PY - 2007 TI - Determination of the neutral point in flat rolling processes JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - rolling; modeling; finite element methods; SLAB method; N2 - Studies of rolling processes are very interesting because a large quantity of produced parts are rolled at some point in their fabrication. In this paper the flat rolling process is analyzed using the FEM and an analytical method in order to determine how the reduction, the velocity of the strip and the frictional coefficient affect the position of the neutral point. Both the analytical and FEM results are compared and we can say that analytical equations and the FEM modeling are in good agreement. The plane strain assumption is used in the FEM and in the analytical study, so, in order to study stress and strain, a two-dimensional mesh was considered for all the models. With such models, the deflection of the rolls for different strip thicknesses can be determined. The studied configuration is a four-high rolling system and the rolls and the strip are meshed in order to obtain their strain, stress, displacements and velocity fields. UR - https://www.sv-jme.eu/sl/article/determination-of-the-neutral-point-in-flat-rolling-processes/
@article{{}{.},
author = {León, J., Luis, C., Luri, R., Reyero, J.},
title = {Determination of the neutral point in flat rolling processes},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {53},
number = {11},
year = {2007},
doi = {},
url = {https://www.sv-jme.eu/sl/article/determination-of-the-neutral-point-in-flat-rolling-processes/}
}
TY - JOUR AU - León, J. AU - Luis, C.J. AU - Luri, R. AU - Reyero, J. PY - 2017/08/18 TI - Determination of the neutral point in flat rolling processes JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 53, No 11 (2007): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - rolling, modeling, finite element methods, SLAB method, N2 - Studies of rolling processes are very interesting because a large quantity of produced parts are rolled at some point in their fabrication. In this paper the flat rolling process is analyzed using the FEM and an analytical method in order to determine how the reduction, the velocity of the strip and the frictional coefficient affect the position of the neutral point. Both the analytical and FEM results are compared and we can say that analytical equations and the FEM modeling are in good agreement. The plane strain assumption is used in the FEM and in the analytical study, so, in order to study stress and strain, a two-dimensional mesh was considered for all the models. With such models, the deflection of the rolls for different strip thicknesses can be determined. The studied configuration is a four-high rolling system and the rolls and the strip are meshed in order to obtain their strain, stress, displacements and velocity fields. UR - https://www.sv-jme.eu/sl/article/determination-of-the-neutral-point-in-flat-rolling-processes/
León, J., Luis, C.J., Luri, R., AND Reyero, J.. "Determination of the neutral point in flat rolling processes" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 53 Number 11 (18 August 2017)
Strojniški vestnik - Journal of Mechanical Engineering 53(2007)11, 747-754
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
Studies of rolling processes are very interesting because a large quantity of produced parts are rolled at some point in their fabrication. In this paper the flat rolling process is analyzed using the FEM and an analytical method in order to determine how the reduction, the velocity of the strip and the frictional coefficient affect the position of the neutral point. Both the analytical and FEM results are compared and we can say that analytical equations and the FEM modeling are in good agreement. The plane strain assumption is used in the FEM and in the analytical study, so, in order to study stress and strain, a two-dimensional mesh was considered for all the models. With such models, the deflection of the rolls for different strip thicknesses can be determined. The studied configuration is a four-high rolling system and the rolls and the strip are meshed in order to obtain their strain, stress, displacements and velocity fields.