Determining Optimum Rotary Blade Design for Wind-Powered Water-Pumping Systems for Local Selected Sites

1318 Ogledov
1157 Prenosov
Izvoz citacije: ABNT
MOHAMMED, Abdulbasit ;LEMU, Hirpa G.;SIRAHBIZU, Belete .
Determining Optimum Rotary Blade Design for Wind-Powered Water-Pumping Systems for Local Selected Sites. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 67, n.5, p. 214-222, july 2021. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/determining-optimum-rotary-blade-design-for-wind-power-water-pumping-system-for-local-selected-sites/>. Date accessed: 12 jun. 2024. 
doi:http://dx.doi.org/.
Mohammed, A., Lemu, H., & Sirahbizu, B.
(2021).
Determining Optimum Rotary Blade Design for Wind-Powered Water-Pumping Systems for Local Selected Sites.
Strojniški vestnik - Journal of Mechanical Engineering, 67(5), 214-222.
doi:http://dx.doi.org/
@article{.,
	author = {Abdulbasit  Mohammed and Hirpa G. Lemu and Belete  Sirahbizu},
	title = {Determining Optimum Rotary Blade Design for Wind-Powered Water-Pumping Systems for Local Selected Sites},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {67},
	number = {5},
	year = {2021},
	keywords = {boundary element method, rotary sizing, wind power, hydraulic power, power coefficient, water pumping system},
	abstract = {The design of a windmill rotor is critical for harnessing wind energy. In this work, a study is conducted to optimize the design and performance of a rotor blade that is suitable for low wind conditions. The windmills’ rotor blades are aerodynamically designed based on the SG6043 airfoil and wind speed data at local selected sites. The aerodynamic profile of the rotor blade that can provide a maximum power coefficient, which is the relation between real rotor performance and the available wind energy on a given reference area, was calculated. Different parameters, such as blade shapes, chord distributions, tip speed ratio, geometries set angles, etc., were used to optimize the blade design with the objective of extracting maximum wind power for a water pumping system. Windmill rotor of 10.74 m, 7.34 m, and 6.34 m diameter with three blades were obtained for the selected sites at Abomsa, Metehara, and Ziway in south-east Ethiopia. During the rotary blades performance optimization, blade element momentum (BEM) theory and solving iteration by MATLAB® coding were used.},
	issn = {0039-2480},	pages = {214-222},	doi = {},
	url = {https://www.sv-jme.eu/sl/article/determining-optimum-rotary-blade-design-for-wind-power-water-pumping-system-for-local-selected-sites/}
}
Mohammed, A.,Lemu, H.,Sirahbizu, B.
2021 July 67. Determining Optimum Rotary Blade Design for Wind-Powered Water-Pumping Systems for Local Selected Sites. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 67:5
%A Mohammed, Abdulbasit 
%A Lemu, Hirpa G.
%A Sirahbizu, Belete 
%D 2021
%T Determining Optimum Rotary Blade Design for Wind-Powered Water-Pumping Systems for Local Selected Sites
%B 2021
%9 boundary element method, rotary sizing, wind power, hydraulic power, power coefficient, water pumping system
%! Determining Optimum Rotary Blade Design for Wind-Powered Water-Pumping Systems for Local Selected Sites
%K boundary element method, rotary sizing, wind power, hydraulic power, power coefficient, water pumping system
%X The design of a windmill rotor is critical for harnessing wind energy. In this work, a study is conducted to optimize the design and performance of a rotor blade that is suitable for low wind conditions. The windmills’ rotor blades are aerodynamically designed based on the SG6043 airfoil and wind speed data at local selected sites. The aerodynamic profile of the rotor blade that can provide a maximum power coefficient, which is the relation between real rotor performance and the available wind energy on a given reference area, was calculated. Different parameters, such as blade shapes, chord distributions, tip speed ratio, geometries set angles, etc., were used to optimize the blade design with the objective of extracting maximum wind power for a water pumping system. Windmill rotor of 10.74 m, 7.34 m, and 6.34 m diameter with three blades were obtained for the selected sites at Abomsa, Metehara, and Ziway in south-east Ethiopia. During the rotary blades performance optimization, blade element momentum (BEM) theory and solving iteration by MATLAB® coding were used.
%U https://www.sv-jme.eu/sl/article/determining-optimum-rotary-blade-design-for-wind-power-water-pumping-system-for-local-selected-sites/
%0 Journal Article
%R 
%& 214
%P 9
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 67
%N 5
%@ 0039-2480
%8 2021-07-08
%7 2021-07-08
Mohammed, Abdulbasit, Hirpa G. Lemu, & Belete  Sirahbizu.
"Determining Optimum Rotary Blade Design for Wind-Powered Water-Pumping Systems for Local Selected Sites." Strojniški vestnik - Journal of Mechanical Engineering [Online], 67.5 (2021): 214-222. Web.  12 Jun. 2024
TY  - JOUR
AU  - Mohammed, Abdulbasit 
AU  - Lemu, Hirpa G.
AU  - Sirahbizu, Belete 
PY  - 2021
TI  - Determining Optimum Rotary Blade Design for Wind-Powered Water-Pumping Systems for Local Selected Sites
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - boundary element method, rotary sizing, wind power, hydraulic power, power coefficient, water pumping system
N2  - The design of a windmill rotor is critical for harnessing wind energy. In this work, a study is conducted to optimize the design and performance of a rotor blade that is suitable for low wind conditions. The windmills’ rotor blades are aerodynamically designed based on the SG6043 airfoil and wind speed data at local selected sites. The aerodynamic profile of the rotor blade that can provide a maximum power coefficient, which is the relation between real rotor performance and the available wind energy on a given reference area, was calculated. Different parameters, such as blade shapes, chord distributions, tip speed ratio, geometries set angles, etc., were used to optimize the blade design with the objective of extracting maximum wind power for a water pumping system. Windmill rotor of 10.74 m, 7.34 m, and 6.34 m diameter with three blades were obtained for the selected sites at Abomsa, Metehara, and Ziway in south-east Ethiopia. During the rotary blades performance optimization, blade element momentum (BEM) theory and solving iteration by MATLAB® coding were used.
UR  - https://www.sv-jme.eu/sl/article/determining-optimum-rotary-blade-design-for-wind-power-water-pumping-system-for-local-selected-sites/
@article{{}{.},
	author = {Mohammed, A., Lemu, H., Sirahbizu, B.},
	title = {Determining Optimum Rotary Blade Design for Wind-Powered Water-Pumping Systems for Local Selected Sites},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {67},
	number = {5},
	year = {2021},
	doi = {},
	url = {https://www.sv-jme.eu/sl/article/determining-optimum-rotary-blade-design-for-wind-power-water-pumping-system-for-local-selected-sites/}
}
TY  - JOUR
AU  - Mohammed, Abdulbasit 
AU  - Lemu, Hirpa G.
AU  - Sirahbizu, Belete 
PY  - 2021/07/08
TI  - Determining Optimum Rotary Blade Design for Wind-Powered Water-Pumping Systems for Local Selected Sites
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 67, No 5 (2021): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - boundary element method, rotary sizing, wind power, hydraulic power, power coefficient, water pumping system
N2  - The design of a windmill rotor is critical for harnessing wind energy. In this work, a study is conducted to optimize the design and performance of a rotor blade that is suitable for low wind conditions. The windmills’ rotor blades are aerodynamically designed based on the SG6043 airfoil and wind speed data at local selected sites. The aerodynamic profile of the rotor blade that can provide a maximum power coefficient, which is the relation between real rotor performance and the available wind energy on a given reference area, was calculated. Different parameters, such as blade shapes, chord distributions, tip speed ratio, geometries set angles, etc., were used to optimize the blade design with the objective of extracting maximum wind power for a water pumping system. Windmill rotor of 10.74 m, 7.34 m, and 6.34 m diameter with three blades were obtained for the selected sites at Abomsa, Metehara, and Ziway in south-east Ethiopia. During the rotary blades performance optimization, blade element momentum (BEM) theory and solving iteration by MATLAB® coding were used.
UR  - https://www.sv-jme.eu/sl/article/determining-optimum-rotary-blade-design-for-wind-power-water-pumping-system-for-local-selected-sites/
Mohammed, Abdulbasit, Lemu, Hirpa, AND Sirahbizu, Belete.
"Determining Optimum Rotary Blade Design for Wind-Powered Water-Pumping Systems for Local Selected Sites" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 67 Number 5 (08 July 2021)

Avtorji

Inštitucije

  • Addis Ababa Science and Technology University, Ethiopia 1
  • University of Stavanger, Norway 2

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 67(2021)5, 214-222
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

https://doi.org/10.5545/sv-jme.2021.7104

The design of a windmill rotor is critical for harnessing wind energy. In this work, a study is conducted to optimize the design and performance of a rotor blade that is suitable for low wind conditions. The windmills’ rotor blades are aerodynamically designed based on the SG6043 airfoil and wind speed data at local selected sites. The aerodynamic profile of the rotor blade that can provide a maximum power coefficient, which is the relation between real rotor performance and the available wind energy on a given reference area, was calculated. Different parameters, such as blade shapes, chord distributions, tip speed ratio, geometries set angles, etc., were used to optimize the blade design with the objective of extracting maximum wind power for a water pumping system. Windmill rotor of 10.74 m, 7.34 m, and 6.34 m diameter with three blades were obtained for the selected sites at Abomsa, Metehara, and Ziway in south-east Ethiopia. During the rotary blades performance optimization, blade element momentum (BEM) theory and solving iteration by MATLAB® coding were used.

boundary element method, rotary sizing, wind power, hydraulic power, power coefficient, water pumping system