Direct Diode Laser Cladding of Inconel 625/WC Composite Coatings

3027 Ogledov
2458 Prenosov
Izvoz citacije: ABNT
JANICKI, Damian ;MUSZTYFAGA, Małgorzata Monika.
Direct Diode Laser Cladding of Inconel 625/WC Composite Coatings. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 62, n.6, p. 363-372, june 2018. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/direct-diode-laser-cladding-of-inconel-625wc-composite-coatings/>. Date accessed: 10 dec. 2024. 
doi:http://dx.doi.org/10.5545/sv-jme.2015.3194.
Janicki, D., & Musztyfaga, M.
(2016).
Direct Diode Laser Cladding of Inconel 625/WC Composite Coatings.
Strojniški vestnik - Journal of Mechanical Engineering, 62(6), 363-372.
doi:http://dx.doi.org/10.5545/sv-jme.2015.3194
@article{sv-jmesv-jme.2015.3194,
	author = {Damian  Janicki and Małgorzata Monika Musztyfaga},
	title = {Direct Diode Laser Cladding of Inconel 625/WC Composite Coatings},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {62},
	number = {6},
	year = {2016},
	keywords = {metal matrix composite coating, Inconel 625, erosive wear, laser cladding, diode laser, tungsten carbide},
	abstract = {Metal matrix composite coatings, composed of Inconel 625 alloy and tungsten carbide (WC), have been produced by laser cladding using a high power direct diode laser with a rectangular laser beam spot and a top-hat beam profile. The primary goal of the investigation was to understand the role of the shape of WC particles and the heat input level on the quality of the composite coating system used, especially on its erosion behaviour. The results indicated that angular WC particles are more susceptible to dissolution in the molten pool than spherical. However, the composite coatings containing angular WC particles exhibited significantly higher erosion resistance than those with spherical WC for both normal and oblique impacts. This is directly attributed to the excellent mechanical interlocking of the angular WC in the matrix. The WC/matrix interfacial decohesion has been observed in the coatings containing spherical WC at the oblique impact.},
	issn = {0039-2480},	pages = {363-372},	doi = {10.5545/sv-jme.2015.3194},
	url = {https://www.sv-jme.eu/sl/article/direct-diode-laser-cladding-of-inconel-625wc-composite-coatings/}
}
Janicki, D.,Musztyfaga, M.
2016 June 62. Direct Diode Laser Cladding of Inconel 625/WC Composite Coatings. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 62:6
%A Janicki, Damian 
%A Musztyfaga, Małgorzata Monika
%D 2016
%T Direct Diode Laser Cladding of Inconel 625/WC Composite Coatings
%B 2016
%9 metal matrix composite coating, Inconel 625, erosive wear, laser cladding, diode laser, tungsten carbide
%! Direct Diode Laser Cladding of Inconel 625/WC Composite Coatings
%K metal matrix composite coating, Inconel 625, erosive wear, laser cladding, diode laser, tungsten carbide
%X Metal matrix composite coatings, composed of Inconel 625 alloy and tungsten carbide (WC), have been produced by laser cladding using a high power direct diode laser with a rectangular laser beam spot and a top-hat beam profile. The primary goal of the investigation was to understand the role of the shape of WC particles and the heat input level on the quality of the composite coating system used, especially on its erosion behaviour. The results indicated that angular WC particles are more susceptible to dissolution in the molten pool than spherical. However, the composite coatings containing angular WC particles exhibited significantly higher erosion resistance than those with spherical WC for both normal and oblique impacts. This is directly attributed to the excellent mechanical interlocking of the angular WC in the matrix. The WC/matrix interfacial decohesion has been observed in the coatings containing spherical WC at the oblique impact.
%U https://www.sv-jme.eu/sl/article/direct-diode-laser-cladding-of-inconel-625wc-composite-coatings/
%0 Journal Article
%R 10.5545/sv-jme.2015.3194
%& 363
%P 10
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 62
%N 6
%@ 0039-2480
%8 2018-06-27
%7 2018-06-27
Janicki, Damian, & Małgorzata Monika Musztyfaga.
"Direct Diode Laser Cladding of Inconel 625/WC Composite Coatings." Strojniški vestnik - Journal of Mechanical Engineering [Online], 62.6 (2016): 363-372. Web.  10 Dec. 2024
TY  - JOUR
AU  - Janicki, Damian 
AU  - Musztyfaga, Małgorzata Monika
PY  - 2016
TI  - Direct Diode Laser Cladding of Inconel 625/WC Composite Coatings
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2015.3194
KW  - metal matrix composite coating, Inconel 625, erosive wear, laser cladding, diode laser, tungsten carbide
N2  - Metal matrix composite coatings, composed of Inconel 625 alloy and tungsten carbide (WC), have been produced by laser cladding using a high power direct diode laser with a rectangular laser beam spot and a top-hat beam profile. The primary goal of the investigation was to understand the role of the shape of WC particles and the heat input level on the quality of the composite coating system used, especially on its erosion behaviour. The results indicated that angular WC particles are more susceptible to dissolution in the molten pool than spherical. However, the composite coatings containing angular WC particles exhibited significantly higher erosion resistance than those with spherical WC for both normal and oblique impacts. This is directly attributed to the excellent mechanical interlocking of the angular WC in the matrix. The WC/matrix interfacial decohesion has been observed in the coatings containing spherical WC at the oblique impact.
UR  - https://www.sv-jme.eu/sl/article/direct-diode-laser-cladding-of-inconel-625wc-composite-coatings/
@article{{sv-jme}{sv-jme.2015.3194},
	author = {Janicki, D., Musztyfaga, M.},
	title = {Direct Diode Laser Cladding of Inconel 625/WC Composite Coatings},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {62},
	number = {6},
	year = {2016},
	doi = {10.5545/sv-jme.2015.3194},
	url = {https://www.sv-jme.eu/sl/article/direct-diode-laser-cladding-of-inconel-625wc-composite-coatings/}
}
TY  - JOUR
AU  - Janicki, Damian 
AU  - Musztyfaga, Małgorzata Monika
PY  - 2018/06/27
TI  - Direct Diode Laser Cladding of Inconel 625/WC Composite Coatings
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 62, No 6 (2016): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2015.3194
KW  - metal matrix composite coating, Inconel 625, erosive wear, laser cladding, diode laser, tungsten carbide
N2  - Metal matrix composite coatings, composed of Inconel 625 alloy and tungsten carbide (WC), have been produced by laser cladding using a high power direct diode laser with a rectangular laser beam spot and a top-hat beam profile. The primary goal of the investigation was to understand the role of the shape of WC particles and the heat input level on the quality of the composite coating system used, especially on its erosion behaviour. The results indicated that angular WC particles are more susceptible to dissolution in the molten pool than spherical. However, the composite coatings containing angular WC particles exhibited significantly higher erosion resistance than those with spherical WC for both normal and oblique impacts. This is directly attributed to the excellent mechanical interlocking of the angular WC in the matrix. The WC/matrix interfacial decohesion has been observed in the coatings containing spherical WC at the oblique impact.
UR  - https://www.sv-jme.eu/sl/article/direct-diode-laser-cladding-of-inconel-625wc-composite-coatings/
Janicki, Damian, AND Musztyfaga, Małgorzata.
"Direct Diode Laser Cladding of Inconel 625/WC Composite Coatings" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 62 Number 6 (27 June 2018)

Avtorji

Inštitucije

  • Silesian University of Technology, Faculty of Mechanical Engineering, Poland 1

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 62(2016)6, 363-372
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

https://doi.org/10.5545/sv-jme.2015.3194

Metal matrix composite coatings, composed of Inconel 625 alloy and tungsten carbide (WC), have been produced by laser cladding using a high power direct diode laser with a rectangular laser beam spot and a top-hat beam profile. The primary goal of the investigation was to understand the role of the shape of WC particles and the heat input level on the quality of the composite coating system used, especially on its erosion behaviour. The results indicated that angular WC particles are more susceptible to dissolution in the molten pool than spherical. However, the composite coatings containing angular WC particles exhibited significantly higher erosion resistance than those with spherical WC for both normal and oblique impacts. This is directly attributed to the excellent mechanical interlocking of the angular WC in the matrix. The WC/matrix interfacial decohesion has been observed in the coatings containing spherical WC at the oblique impact.

metal matrix composite coating, Inconel 625, erosive wear, laser cladding, diode laser, tungsten carbide