Dynamic 1D Model of an Active Magnetic Regenerator: A Parametric Investigation

2229 Ogledov
1261 Prenosov
Izvoz citacije: ABNT
TAGLIAFICO, Giulio ;SCARPA, Federico ;TAGLIAFICO, Luca Antonio .
Dynamic 1D Model of an Active Magnetic Regenerator: A Parametric Investigation. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 58, n.1, p. 9-15, february 2012. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/dynamic-1d-model-of-an-active-magnetic-regenerator-a-parametric-investigation/>. Date accessed: 05 nov. 2024. 
doi:http://dx.doi.org/10.5545/sv-jme.2010.112.
Tagliafico, G., Scarpa, F., & Tagliafico, L.
(2012).
Dynamic 1D Model of an Active Magnetic Regenerator: A Parametric Investigation.
Strojniški vestnik - Journal of Mechanical Engineering, 58(1), 9-15.
doi:http://dx.doi.org/10.5545/sv-jme.2010.112
@article{sv-jmesv-jme.2010.112,
	author = {Giulio  Tagliafico and Federico  Scarpa and Luca Antonio  Tagliafico},
	title = {Dynamic 1D Model of an Active Magnetic Regenerator: A Parametric Investigation},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {58},
	number = {1},
	year = {2012},
	keywords = {magnetic refrigeration; active regeneration; modelization; parametric investigation},
	abstract = {A one dimensional dynamic model of a reciprocating active reciprocating magnetic regenerator (AMR) was developed and a parametric analysis of its behavior at near room temperature conditions was carried out. The investigation is focused on the thermal behavior of the regenerator alone, regardless of the apparatus in which it could work. The parametric investigation aims at evaluating the influence on the AMR performances of the operating frequency and fluid mass flow rate, that is the parameters that can be tuned in a given actual device. The performance parameters analyzed are refrigeration capacity, temperature span, coefficient of performance and second law thermodynamic efficiency. A standard geometry of the AMR was assumed, while the results are given in a non-dimensional form with reference to a conventional operating condition. Simulations show that the refrigeration capacity is very sensitive to the utilization factor, that causes a 20% refrigeration capacity reduction with a variation of -20% or +10%. The coefficient of performance (COP) is poorly influenced by Φ. Frequency variations induce a linear variation in refrigeration capacity, and a decrease in COP due to friction in the intermediate fluid. The second law thermodynamic efficiency trends show that friction and heat transfer irreversibility dominates at low and high temperature spans, respectively.},
	issn = {0039-2480},	pages = {9-15},	doi = {10.5545/sv-jme.2010.112},
	url = {https://www.sv-jme.eu/sl/article/dynamic-1d-model-of-an-active-magnetic-regenerator-a-parametric-investigation/}
}
Tagliafico, G.,Scarpa, F.,Tagliafico, L.
2012 February 58. Dynamic 1D Model of an Active Magnetic Regenerator: A Parametric Investigation. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 58:1
%A Tagliafico, Giulio 
%A Scarpa, Federico 
%A Tagliafico, Luca Antonio 
%D 2012
%T Dynamic 1D Model of an Active Magnetic Regenerator: A Parametric Investigation
%B 2012
%9 magnetic refrigeration; active regeneration; modelization; parametric investigation
%! Dynamic 1D Model of an Active Magnetic Regenerator: A Parametric Investigation
%K magnetic refrigeration; active regeneration; modelization; parametric investigation
%X A one dimensional dynamic model of a reciprocating active reciprocating magnetic regenerator (AMR) was developed and a parametric analysis of its behavior at near room temperature conditions was carried out. The investigation is focused on the thermal behavior of the regenerator alone, regardless of the apparatus in which it could work. The parametric investigation aims at evaluating the influence on the AMR performances of the operating frequency and fluid mass flow rate, that is the parameters that can be tuned in a given actual device. The performance parameters analyzed are refrigeration capacity, temperature span, coefficient of performance and second law thermodynamic efficiency. A standard geometry of the AMR was assumed, while the results are given in a non-dimensional form with reference to a conventional operating condition. Simulations show that the refrigeration capacity is very sensitive to the utilization factor, that causes a 20% refrigeration capacity reduction with a variation of -20% or +10%. The coefficient of performance (COP) is poorly influenced by Φ. Frequency variations induce a linear variation in refrigeration capacity, and a decrease in COP due to friction in the intermediate fluid. The second law thermodynamic efficiency trends show that friction and heat transfer irreversibility dominates at low and high temperature spans, respectively.
%U https://www.sv-jme.eu/sl/article/dynamic-1d-model-of-an-active-magnetic-regenerator-a-parametric-investigation/
%0 Journal Article
%R 10.5545/sv-jme.2010.112
%& 9
%P 7
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 58
%N 1
%@ 0039-2480
%8 2012-02-01
%7 2012-02-01
Tagliafico, Giulio, Federico  Scarpa, & Luca Antonio  Tagliafico.
"Dynamic 1D Model of an Active Magnetic Regenerator: A Parametric Investigation." Strojniški vestnik - Journal of Mechanical Engineering [Online], 58.1 (2012): 9-15. Web.  05 Nov. 2024
TY  - JOUR
AU  - Tagliafico, Giulio 
AU  - Scarpa, Federico 
AU  - Tagliafico, Luca Antonio 
PY  - 2012
TI  - Dynamic 1D Model of an Active Magnetic Regenerator: A Parametric Investigation
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2010.112
KW  - magnetic refrigeration; active regeneration; modelization; parametric investigation
N2  - A one dimensional dynamic model of a reciprocating active reciprocating magnetic regenerator (AMR) was developed and a parametric analysis of its behavior at near room temperature conditions was carried out. The investigation is focused on the thermal behavior of the regenerator alone, regardless of the apparatus in which it could work. The parametric investigation aims at evaluating the influence on the AMR performances of the operating frequency and fluid mass flow rate, that is the parameters that can be tuned in a given actual device. The performance parameters analyzed are refrigeration capacity, temperature span, coefficient of performance and second law thermodynamic efficiency. A standard geometry of the AMR was assumed, while the results are given in a non-dimensional form with reference to a conventional operating condition. Simulations show that the refrigeration capacity is very sensitive to the utilization factor, that causes a 20% refrigeration capacity reduction with a variation of -20% or +10%. The coefficient of performance (COP) is poorly influenced by Φ. Frequency variations induce a linear variation in refrigeration capacity, and a decrease in COP due to friction in the intermediate fluid. The second law thermodynamic efficiency trends show that friction and heat transfer irreversibility dominates at low and high temperature spans, respectively.
UR  - https://www.sv-jme.eu/sl/article/dynamic-1d-model-of-an-active-magnetic-regenerator-a-parametric-investigation/
@article{{sv-jme}{sv-jme.2010.112},
	author = {Tagliafico, G., Scarpa, F., Tagliafico, L.},
	title = {Dynamic 1D Model of an Active Magnetic Regenerator: A Parametric Investigation},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {58},
	number = {1},
	year = {2012},
	doi = {10.5545/sv-jme.2010.112},
	url = {https://www.sv-jme.eu/sl/article/dynamic-1d-model-of-an-active-magnetic-regenerator-a-parametric-investigation/}
}
TY  - JOUR
AU  - Tagliafico, Giulio 
AU  - Scarpa, Federico 
AU  - Tagliafico, Luca Antonio 
PY  - 2012/02/01
TI  - Dynamic 1D Model of an Active Magnetic Regenerator: A Parametric Investigation
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 58, No 1 (2012): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2010.112
KW  - magnetic refrigeration, active regeneration, modelization, parametric investigation
N2  - A one dimensional dynamic model of a reciprocating active reciprocating magnetic regenerator (AMR) was developed and a parametric analysis of its behavior at near room temperature conditions was carried out. The investigation is focused on the thermal behavior of the regenerator alone, regardless of the apparatus in which it could work. The parametric investigation aims at evaluating the influence on the AMR performances of the operating frequency and fluid mass flow rate, that is the parameters that can be tuned in a given actual device. The performance parameters analyzed are refrigeration capacity, temperature span, coefficient of performance and second law thermodynamic efficiency. A standard geometry of the AMR was assumed, while the results are given in a non-dimensional form with reference to a conventional operating condition. Simulations show that the refrigeration capacity is very sensitive to the utilization factor, that causes a 20% refrigeration capacity reduction with a variation of -20% or +10%. The coefficient of performance (COP) is poorly influenced by Φ. Frequency variations induce a linear variation in refrigeration capacity, and a decrease in COP due to friction in the intermediate fluid. The second law thermodynamic efficiency trends show that friction and heat transfer irreversibility dominates at low and high temperature spans, respectively.
UR  - https://www.sv-jme.eu/sl/article/dynamic-1d-model-of-an-active-magnetic-regenerator-a-parametric-investigation/
Tagliafico, Giulio, Scarpa, Federico, AND Tagliafico, Luca Antonio.
"Dynamic 1D Model of an Active Magnetic Regenerator: A Parametric Investigation" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 58 Number 1 (01 February 2012)

Avtorji

Inštitucije

  • University of Genoa, DCCI, Italy 1
  • University of Genoa, DIPTEM/TEC, Via all’Opera Pia 15a, Genova, 16145, Italy 2
  • University of Genoa, DIPTEM/TEC, Italy 3

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 58(2012)1, 9-15
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

https://doi.org/10.5545/sv-jme.2010.112

A one dimensional dynamic model of a reciprocating active reciprocating magnetic regenerator (AMR) was developed and a parametric analysis of its behavior at near room temperature conditions was carried out. The investigation is focused on the thermal behavior of the regenerator alone, regardless of the apparatus in which it could work. The parametric investigation aims at evaluating the influence on the AMR performances of the operating frequency and fluid mass flow rate, that is the parameters that can be tuned in a given actual device. The performance parameters analyzed are refrigeration capacity, temperature span, coefficient of performance and second law thermodynamic efficiency. A standard geometry of the AMR was assumed, while the results are given in a non-dimensional form with reference to a conventional operating condition. Simulations show that the refrigeration capacity is very sensitive to the utilization factor, that causes a 20% refrigeration capacity reduction with a variation of -20% or +10%. The coefficient of performance (COP) is poorly influenced by Φ. Frequency variations induce a linear variation in refrigeration capacity, and a decrease in COP due to friction in the intermediate fluid. The second law thermodynamic efficiency trends show that friction and heat transfer irreversibility dominates at low and high temperature spans, respectively.

magnetic refrigeration; active regeneration; modelization; parametric investigation