Enhanced heat transfer on thermo active cooling wall

616 Ogledov
262 Prenosov
Izvoz citacije: ABNT
VENKO, Samo ;VIDRIH, Boris ;PAVLOVIČ, Erik ;MEDVED, Sašo .
Enhanced heat transfer on thermo active cooling wall. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 58, n.11, p. 623-632, june 2018. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/enhanced-heat-transfer-on-thermo-active-cooling-wall/>. Date accessed: 28 jan. 2020. 
doi:http://dx.doi.org/10.5545/sv-jme.2012.436.
Venko, S., Vidrih, B., Pavlovič, E., & Medved, S.
(2012).
Enhanced heat transfer on thermo active cooling wall.
Strojniški vestnik - Journal of Mechanical Engineering, 58(11), 623-632.
doi:http://dx.doi.org/10.5545/sv-jme.2012.436
@article{sv-jmesv-jme.2012.436,
	author = {Samo  Venko and Boris  Vidrih and Erik  Pavlovič and Sašo  Medved},
	title = {Enhanced heat transfer on thermo active cooling wall},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {58},
	number = {11},
	year = {2012},
	keywords = {free cooling; thermo active building systems; enhanced convection heat transfer; thermal comfort; numeric heat transfer},
	abstract = {In the article a study of the cooling potential of thermo activated wall in office building with enhanced convective heat transfer is presented. Heat transfer on vertical cooled wall is enhanced by a longitude jet of supply fresh air from diffuser mounted parallel on the top of the wall. Such system is compared to adequate system with natural convection heat transfer from the cooled surface. Empirical models in form of multicriterial polynoms for local and average convective heat transfer coefficients determination were developed for natural and enhanced convection using CFD techniques. Empirical models were used in TRNSYS simulation tool for analyzing cooling potential increasing in case of enhanced heat transfer on cooled wall surface in typical office. Results show significant increasing of cooling load, decreasing of energy consumption for cooling of the office and better adaptive thermal comfort if heat transfer is enhanced with longitude jet of fresh supply air.},
	issn = {0039-2480},	pages = {623-632},	doi = {10.5545/sv-jme.2012.436},
	url = {https://www.sv-jme.eu/sl/article/enhanced-heat-transfer-on-thermo-active-cooling-wall/}
}
Venko, S.,Vidrih, B.,Pavlovič, E.,Medved, S.
2012 June 58. Enhanced heat transfer on thermo active cooling wall. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 58:11
%A Venko, Samo 
%A Vidrih, Boris 
%A Pavlovič, Erik 
%A Medved, Sašo 
%D 2012
%T Enhanced heat transfer on thermo active cooling wall
%B 2012
%9 free cooling; thermo active building systems; enhanced convection heat transfer; thermal comfort; numeric heat transfer
%! Enhanced heat transfer on thermo active cooling wall
%K free cooling; thermo active building systems; enhanced convection heat transfer; thermal comfort; numeric heat transfer
%X In the article a study of the cooling potential of thermo activated wall in office building with enhanced convective heat transfer is presented. Heat transfer on vertical cooled wall is enhanced by a longitude jet of supply fresh air from diffuser mounted parallel on the top of the wall. Such system is compared to adequate system with natural convection heat transfer from the cooled surface. Empirical models in form of multicriterial polynoms for local and average convective heat transfer coefficients determination were developed for natural and enhanced convection using CFD techniques. Empirical models were used in TRNSYS simulation tool for analyzing cooling potential increasing in case of enhanced heat transfer on cooled wall surface in typical office. Results show significant increasing of cooling load, decreasing of energy consumption for cooling of the office and better adaptive thermal comfort if heat transfer is enhanced with longitude jet of fresh supply air.
%U https://www.sv-jme.eu/sl/article/enhanced-heat-transfer-on-thermo-active-cooling-wall/
%0 Journal Article
%R 10.5545/sv-jme.2012.436
%& 623
%P 10
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 58
%N 11
%@ 0039-2480
%8 2018-06-28
%7 2018-06-28
Venko, Samo, Boris  Vidrih, Erik  Pavlovič, & Sašo  Medved.
"Enhanced heat transfer on thermo active cooling wall." Strojniški vestnik - Journal of Mechanical Engineering [Online], 58.11 (2012): 623-632. Web.  28 Jan. 2020
TY  - JOUR
AU  - Venko, Samo 
AU  - Vidrih, Boris 
AU  - Pavlovič, Erik 
AU  - Medved, Sašo 
PY  - 2012
TI  - Enhanced heat transfer on thermo active cooling wall
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2012.436
KW  - free cooling; thermo active building systems; enhanced convection heat transfer; thermal comfort; numeric heat transfer
N2  - In the article a study of the cooling potential of thermo activated wall in office building with enhanced convective heat transfer is presented. Heat transfer on vertical cooled wall is enhanced by a longitude jet of supply fresh air from diffuser mounted parallel on the top of the wall. Such system is compared to adequate system with natural convection heat transfer from the cooled surface. Empirical models in form of multicriterial polynoms for local and average convective heat transfer coefficients determination were developed for natural and enhanced convection using CFD techniques. Empirical models were used in TRNSYS simulation tool for analyzing cooling potential increasing in case of enhanced heat transfer on cooled wall surface in typical office. Results show significant increasing of cooling load, decreasing of energy consumption for cooling of the office and better adaptive thermal comfort if heat transfer is enhanced with longitude jet of fresh supply air.
UR  - https://www.sv-jme.eu/sl/article/enhanced-heat-transfer-on-thermo-active-cooling-wall/
@article{{sv-jme}{sv-jme.2012.436},
	author = {Venko, S., Vidrih, B., Pavlovič, E., Medved, S.},
	title = {Enhanced heat transfer on thermo active cooling wall},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {58},
	number = {11},
	year = {2012},
	doi = {10.5545/sv-jme.2012.436},
	url = {https://www.sv-jme.eu/sl/article/enhanced-heat-transfer-on-thermo-active-cooling-wall/}
}
TY  - JOUR
AU  - Venko, Samo 
AU  - Vidrih, Boris 
AU  - Pavlovič, Erik 
AU  - Medved, Sašo 
PY  - 2018/06/28
TI  - Enhanced heat transfer on thermo active cooling wall
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 58, No 11 (2012): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2012.436
KW  - free cooling, thermo active building systems, enhanced convection heat transfer, thermal comfort, numeric heat transfer
N2  - In the article a study of the cooling potential of thermo activated wall in office building with enhanced convective heat transfer is presented. Heat transfer on vertical cooled wall is enhanced by a longitude jet of supply fresh air from diffuser mounted parallel on the top of the wall. Such system is compared to adequate system with natural convection heat transfer from the cooled surface. Empirical models in form of multicriterial polynoms for local and average convective heat transfer coefficients determination were developed for natural and enhanced convection using CFD techniques. Empirical models were used in TRNSYS simulation tool for analyzing cooling potential increasing in case of enhanced heat transfer on cooled wall surface in typical office. Results show significant increasing of cooling load, decreasing of energy consumption for cooling of the office and better adaptive thermal comfort if heat transfer is enhanced with longitude jet of fresh supply air.
UR  - https://www.sv-jme.eu/sl/article/enhanced-heat-transfer-on-thermo-active-cooling-wall/
Venko, Samo, Vidrih, Boris, Pavlovič, Erik, AND Medved, Sašo.
"Enhanced heat transfer on thermo active cooling wall" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 58 Number 11 (28 June 2018)

Avtorji

Inštitucije

  • Hidria IMP Klima d.o.o., Godovič 150, SI-5275 Godovič, Slovenija 1
  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenija 2

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 58(2012)11, 623-632

https://doi.org/10.5545/sv-jme.2012.436

In the article a study of the cooling potential of thermo activated wall in office building with enhanced convective heat transfer is presented. Heat transfer on vertical cooled wall is enhanced by a longitude jet of supply fresh air from diffuser mounted parallel on the top of the wall. Such system is compared to adequate system with natural convection heat transfer from the cooled surface. Empirical models in form of multicriterial polynoms for local and average convective heat transfer coefficients determination were developed for natural and enhanced convection using CFD techniques. Empirical models were used in TRNSYS simulation tool for analyzing cooling potential increasing in case of enhanced heat transfer on cooled wall surface in typical office. Results show significant increasing of cooling load, decreasing of energy consumption for cooling of the office and better adaptive thermal comfort if heat transfer is enhanced with longitude jet of fresh supply air.

free cooling; thermo active building systems; enhanced convection heat transfer; thermal comfort; numeric heat transfer