Fabrication of High Chromium White Iron Surface Layers on Ductile Cast Iron Substrate by Laser Surface Alloying

JANICKI, Damian .
Fabrication of High Chromium White Iron Surface Layers on Ductile Cast Iron Substrate by Laser Surface Alloying. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 63, n.12, p. 705-714, june 2018. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/fabrication-of-high-chromium-white-iron-surface-layers-on-ductile-cast-iron-substrate-by-laser-surface-alloying/>. Date accessed: 24 apr. 2024. 
doi:http://dx.doi.org/10.5545/sv-jme.2017.4379.

Janicki, D.
(2017).
Fabrication of High Chromium White Iron Surface Layers on Ductile Cast Iron Substrate by Laser Surface Alloying.
Strojniški vestnik - Journal of Mechanical Engineering, 63(12), 705-714.
doi:http://dx.doi.org/10.5545/sv-jme.2017.4379

@article{sv-jmesv-jme.2017.4379,
	author = {Damian  Janicki},
	title = {Fabrication of High Chromium White Iron Surface Layers on Ductile Cast Iron Substrate by Laser Surface Alloying},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {63},
	number = {12},
	year = {2017},
	keywords = {high chromium white iron; ductile cast iron; surface alloying; diode laser},
	abstract = {High chromium white iron surface layers (HWSLs) have been produced on a ductile cast iron EN-GJS-700-2 substrate by diode laser surface alloying with a direct injection of a pure chromium powder into the molten pool. The main objective of this study was to investigate the effect of laser alloying parameters on the microstructural evolution in the HWSLs. The composition of the uniformly alloyed HWSLs contained up to 14.4 wt.% Cr. Both hypoeutectic and eutectic high chromium white iron microstructures were obtained. The type and morphology of eutectic carbides are affected by both the chromium concentration in the molten pool and the solidification conditions. With increasing chromium content, the fraction of eutectic regions in the hypoeutectic HWSLs increases and the eutectic carbides become progressively smaller. The rodtype morphology of the M7C3 eutectic carbides was dominant in the eutectic HWSLs. An average hardness of the HWSLs was influenced by the size of carbide precipitations, and was 675 HV and 650 HV for hypoeutectic and eutectic compositions, respectively.},
	issn = {0039-2480},	pages = {705-714},	doi = {10.5545/sv-jme.2017.4379},
	url = {https://www.sv-jme.eu/sl/article/fabrication-of-high-chromium-white-iron-surface-layers-on-ductile-cast-iron-substrate-by-laser-surface-alloying/}
}

Janicki, D.
2017 June 63. Fabrication of High Chromium White Iron Surface Layers on Ductile Cast Iron Substrate by Laser Surface Alloying. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 63:12

%A Janicki, Damian 
%D 2017
%T Fabrication of High Chromium White Iron Surface Layers on Ductile Cast Iron Substrate by Laser Surface Alloying
%B 2017
%9 high chromium white iron; ductile cast iron; surface alloying; diode laser
%! Fabrication of High Chromium White Iron Surface Layers on Ductile Cast Iron Substrate by Laser Surface Alloying
%K high chromium white iron; ductile cast iron; surface alloying; diode laser
%X High chromium white iron surface layers (HWSLs) have been produced on a ductile cast iron EN-GJS-700-2 substrate by diode laser surface alloying with a direct injection of a pure chromium powder into the molten pool. The main objective of this study was to investigate the effect of laser alloying parameters on the microstructural evolution in the HWSLs. The composition of the uniformly alloyed HWSLs contained up to 14.4 wt.% Cr. Both hypoeutectic and eutectic high chromium white iron microstructures were obtained. The type and morphology of eutectic carbides are affected by both the chromium concentration in the molten pool and the solidification conditions. With increasing chromium content, the fraction of eutectic regions in the hypoeutectic HWSLs increases and the eutectic carbides become progressively smaller. The rodtype morphology of the M7C3 eutectic carbides was dominant in the eutectic HWSLs. An average hardness of the HWSLs was influenced by the size of carbide precipitations, and was 675 HV and 650 HV for hypoeutectic and eutectic compositions, respectively.
%U https://www.sv-jme.eu/sl/article/fabrication-of-high-chromium-white-iron-surface-layers-on-ductile-cast-iron-substrate-by-laser-surface-alloying/
%0 Journal Article
%R 10.5545/sv-jme.2017.4379
%& 705
%P 10
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 63
%N 12
%@ 0039-2480
%8 2018-06-27
%7 2018-06-27

Janicki, Damian.
"Fabrication of High Chromium White Iron Surface Layers on Ductile Cast Iron Substrate by Laser Surface Alloying." Strojniški vestnik - Journal of Mechanical Engineering [Online], 63.12 (2017): 705-714. Web.  24 Apr. 2024

TY  - JOUR
AU  - Janicki, Damian 
PY  - 2017
TI  - Fabrication of High Chromium White Iron Surface Layers on Ductile Cast Iron Substrate by Laser Surface Alloying
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2017.4379
KW  - high chromium white iron; ductile cast iron; surface alloying; diode laser
N2  - High chromium white iron surface layers (HWSLs) have been produced on a ductile cast iron EN-GJS-700-2 substrate by diode laser surface alloying with a direct injection of a pure chromium powder into the molten pool. The main objective of this study was to investigate the effect of laser alloying parameters on the microstructural evolution in the HWSLs. The composition of the uniformly alloyed HWSLs contained up to 14.4 wt.% Cr. Both hypoeutectic and eutectic high chromium white iron microstructures were obtained. The type and morphology of eutectic carbides are affected by both the chromium concentration in the molten pool and the solidification conditions. With increasing chromium content, the fraction of eutectic regions in the hypoeutectic HWSLs increases and the eutectic carbides become progressively smaller. The rodtype morphology of the M7C3 eutectic carbides was dominant in the eutectic HWSLs. An average hardness of the HWSLs was influenced by the size of carbide precipitations, and was 675 HV and 650 HV for hypoeutectic and eutectic compositions, respectively.
UR  - https://www.sv-jme.eu/sl/article/fabrication-of-high-chromium-white-iron-surface-layers-on-ductile-cast-iron-substrate-by-laser-surface-alloying/

@article{{sv-jme}{sv-jme.2017.4379},
	author = {Janicki, D.},
	title = {Fabrication of High Chromium White Iron Surface Layers on Ductile Cast Iron Substrate by Laser Surface Alloying},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {63},
	number = {12},
	year = {2017},
	doi = {10.5545/sv-jme.2017.4379},
	url = {https://www.sv-jme.eu/sl/article/fabrication-of-high-chromium-white-iron-surface-layers-on-ductile-cast-iron-substrate-by-laser-surface-alloying/}
}

TY  - JOUR
AU  - Janicki, Damian 
PY  - 2018/06/27
TI  - Fabrication of High Chromium White Iron Surface Layers on Ductile Cast Iron Substrate by Laser Surface Alloying
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 63, No 12 (2017): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2017.4379
KW  - high chromium white iron, ductile cast iron, surface alloying, diode laser
N2  - High chromium white iron surface layers (HWSLs) have been produced on a ductile cast iron EN-GJS-700-2 substrate by diode laser surface alloying with a direct injection of a pure chromium powder into the molten pool. The main objective of this study was to investigate the effect of laser alloying parameters on the microstructural evolution in the HWSLs. The composition of the uniformly alloyed HWSLs contained up to 14.4 wt.% Cr. Both hypoeutectic and eutectic high chromium white iron microstructures were obtained. The type and morphology of eutectic carbides are affected by both the chromium concentration in the molten pool and the solidification conditions. With increasing chromium content, the fraction of eutectic regions in the hypoeutectic HWSLs increases and the eutectic carbides become progressively smaller. The rodtype morphology of the M7C3 eutectic carbides was dominant in the eutectic HWSLs. An average hardness of the HWSLs was influenced by the size of carbide precipitations, and was 675 HV and 650 HV for hypoeutectic and eutectic compositions, respectively.
UR  - https://www.sv-jme.eu/sl/article/fabrication-of-high-chromium-white-iron-surface-layers-on-ductile-cast-iron-substrate-by-laser-surface-alloying/

Janicki, Damian"Fabrication of High Chromium White Iron Surface Layers on Ductile Cast Iron Substrate by Laser Surface Alloying" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 63 Number 12 (27 June 2018)