Forced vibration analysis of milling machine’s hexapod table under machining forces

2962 Ogledov
2665 Prenosov
Izvoz citacije: ABNT
PEDRAMMEHR, Siamak ;MAHBOUBKHAH, Mehran ;CHALAK QAZANI, Mohammad Reza ;RAHMANI, Arash ;PAKZAD, Sajjad .
Forced vibration analysis of milling machine’s hexapod table under machining forces. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 60, n.3, p. 158-171, june 2018. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/forced-vibration-analysis-of-milling-machines-hexapod-table-under-machining-forces/>. Date accessed: 11 dec. 2024. 
doi:http://dx.doi.org/10.5545/sv-jme.2013.1176.
Pedrammehr, S., Mahboubkhah, M., Chalak Qazani, M., Rahmani, A., & Pakzad, S.
(2014).
Forced vibration analysis of milling machine’s hexapod table under machining forces.
Strojniški vestnik - Journal of Mechanical Engineering, 60(3), 158-171.
doi:http://dx.doi.org/10.5545/sv-jme.2013.1176
@article{sv-jmesv-jme.2013.1176,
	author = {Siamak  Pedrammehr and Mehran  Mahboubkhah and Mohammad Reza  Chalak Qazani and Arash  Rahmani and Sajjad  Pakzad},
	title = {Forced vibration analysis of milling machine’s hexapod table under machining forces},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {60},
	number = {3},
	year = {2014},
	keywords = {Hexapod, Machine tool, Vibration, Modal analysis, Cutting force},
	abstract = {Assuming a sinusoidal machining force, the forced vibration of machine tools’ hexapod table in different directions is addressed in the present study. A vibration model for the hexapod table is developed and the relevant explicit equations are derived. In the vibration equation of the table, the pods are assumed as spring-damper systems and the equivalent stiffness and damping of the pods are evaluated with experimental results by modal testing on a pod of the hexapod table. The results of the analytical approach have been verified by FEM simulation. The theoretical and FEM results exhibit similar trends of changes and are close to each other. The vibration of the table in different positions has been studied under rough and finish machining forces for both down and up milling. The ranges of resonance frequencies and vibration amplitudes have also been investigated. The safe functional modes of the table in terms of its upper platform’s position have subsequently been determined.},
	issn = {0039-2480},	pages = {158-171},	doi = {10.5545/sv-jme.2013.1176},
	url = {https://www.sv-jme.eu/sl/article/forced-vibration-analysis-of-milling-machines-hexapod-table-under-machining-forces/}
}
Pedrammehr, S.,Mahboubkhah, M.,Chalak Qazani, M.,Rahmani, A.,Pakzad, S.
2014 June 60. Forced vibration analysis of milling machine’s hexapod table under machining forces. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 60:3
%A Pedrammehr, Siamak 
%A Mahboubkhah, Mehran 
%A Chalak Qazani, Mohammad Reza 
%A Rahmani, Arash 
%A Pakzad, Sajjad 
%D 2014
%T Forced vibration analysis of milling machine’s hexapod table under machining forces
%B 2014
%9 Hexapod, Machine tool, Vibration, Modal analysis, Cutting force
%! Forced vibration analysis of milling machine’s hexapod table under machining forces
%K Hexapod, Machine tool, Vibration, Modal analysis, Cutting force
%X Assuming a sinusoidal machining force, the forced vibration of machine tools’ hexapod table in different directions is addressed in the present study. A vibration model for the hexapod table is developed and the relevant explicit equations are derived. In the vibration equation of the table, the pods are assumed as spring-damper systems and the equivalent stiffness and damping of the pods are evaluated with experimental results by modal testing on a pod of the hexapod table. The results of the analytical approach have been verified by FEM simulation. The theoretical and FEM results exhibit similar trends of changes and are close to each other. The vibration of the table in different positions has been studied under rough and finish machining forces for both down and up milling. The ranges of resonance frequencies and vibration amplitudes have also been investigated. The safe functional modes of the table in terms of its upper platform’s position have subsequently been determined.
%U https://www.sv-jme.eu/sl/article/forced-vibration-analysis-of-milling-machines-hexapod-table-under-machining-forces/
%0 Journal Article
%R 10.5545/sv-jme.2013.1176
%& 158
%P 14
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 60
%N 3
%@ 0039-2480
%8 2018-06-28
%7 2018-06-28
Pedrammehr, Siamak, Mehran  Mahboubkhah, Mohammad Reza  Chalak Qazani, Arash  Rahmani, & Sajjad  Pakzad.
"Forced vibration analysis of milling machine’s hexapod table under machining forces." Strojniški vestnik - Journal of Mechanical Engineering [Online], 60.3 (2014): 158-171. Web.  11 Dec. 2024
TY  - JOUR
AU  - Pedrammehr, Siamak 
AU  - Mahboubkhah, Mehran 
AU  - Chalak Qazani, Mohammad Reza 
AU  - Rahmani, Arash 
AU  - Pakzad, Sajjad 
PY  - 2014
TI  - Forced vibration analysis of milling machine’s hexapod table under machining forces
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2013.1176
KW  - Hexapod, Machine tool, Vibration, Modal analysis, Cutting force
N2  - Assuming a sinusoidal machining force, the forced vibration of machine tools’ hexapod table in different directions is addressed in the present study. A vibration model for the hexapod table is developed and the relevant explicit equations are derived. In the vibration equation of the table, the pods are assumed as spring-damper systems and the equivalent stiffness and damping of the pods are evaluated with experimental results by modal testing on a pod of the hexapod table. The results of the analytical approach have been verified by FEM simulation. The theoretical and FEM results exhibit similar trends of changes and are close to each other. The vibration of the table in different positions has been studied under rough and finish machining forces for both down and up milling. The ranges of resonance frequencies and vibration amplitudes have also been investigated. The safe functional modes of the table in terms of its upper platform’s position have subsequently been determined.
UR  - https://www.sv-jme.eu/sl/article/forced-vibration-analysis-of-milling-machines-hexapod-table-under-machining-forces/
@article{{sv-jme}{sv-jme.2013.1176},
	author = {Pedrammehr, S., Mahboubkhah, M., Chalak Qazani, M., Rahmani, A., Pakzad, S.},
	title = {Forced vibration analysis of milling machine’s hexapod table under machining forces},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {60},
	number = {3},
	year = {2014},
	doi = {10.5545/sv-jme.2013.1176},
	url = {https://www.sv-jme.eu/sl/article/forced-vibration-analysis-of-milling-machines-hexapod-table-under-machining-forces/}
}
TY  - JOUR
AU  - Pedrammehr, Siamak 
AU  - Mahboubkhah, Mehran 
AU  - Chalak Qazani, Mohammad Reza 
AU  - Rahmani, Arash 
AU  - Pakzad, Sajjad 
PY  - 2018/06/28
TI  - Forced vibration analysis of milling machine’s hexapod table under machining forces
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 60, No 3 (2014): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2013.1176
KW  - Hexapod, Machine tool, Vibration, Modal analysis, Cutting force
N2  - Assuming a sinusoidal machining force, the forced vibration of machine tools’ hexapod table in different directions is addressed in the present study. A vibration model for the hexapod table is developed and the relevant explicit equations are derived. In the vibration equation of the table, the pods are assumed as spring-damper systems and the equivalent stiffness and damping of the pods are evaluated with experimental results by modal testing on a pod of the hexapod table. The results of the analytical approach have been verified by FEM simulation. The theoretical and FEM results exhibit similar trends of changes and are close to each other. The vibration of the table in different positions has been studied under rough and finish machining forces for both down and up milling. The ranges of resonance frequencies and vibration amplitudes have also been investigated. The safe functional modes of the table in terms of its upper platform’s position have subsequently been determined.
UR  - https://www.sv-jme.eu/sl/article/forced-vibration-analysis-of-milling-machines-hexapod-table-under-machining-forces/
Pedrammehr, Siamak, Mahboubkhah, Mehran, Chalak Qazani, Mohammad Reza, Rahmani, Arash, AND Pakzad, Sajjad.
"Forced vibration analysis of milling machine’s hexapod table under machining forces" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 60 Number 3 (28 June 2018)

Avtorji

Inštitucije

  • University of Tabriz, Faculty of Mechanical Engineering, Iran / Sabanci University, Faculty of Engineering and Natural Sciences, Turkey 1
  • University of Tabriz, Faculty of Mechanical Engineering, Iran 2
  • Tarbiat Modares University, Department of Mechanical Engineering, Iran 3
  • Islamic Azad University-Ajabshir Branch, Faculty of Mechanical Engineering, Iran 4

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 60(2014)3, 158-171
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

https://doi.org/10.5545/sv-jme.2013.1176

Assuming a sinusoidal machining force, the forced vibration of machine tools’ hexapod table in different directions is addressed in the present study. A vibration model for the hexapod table is developed and the relevant explicit equations are derived. In the vibration equation of the table, the pods are assumed as spring-damper systems and the equivalent stiffness and damping of the pods are evaluated with experimental results by modal testing on a pod of the hexapod table. The results of the analytical approach have been verified by FEM simulation. The theoretical and FEM results exhibit similar trends of changes and are close to each other. The vibration of the table in different positions has been studied under rough and finish machining forces for both down and up milling. The ranges of resonance frequencies and vibration amplitudes have also been investigated. The safe functional modes of the table in terms of its upper platform’s position have subsequently been determined.

Hexapod, Machine tool, Vibration, Modal analysis, Cutting force