High-Cycle Fatigue Behavior of Austenitic Steel and Pure Copper under Uniaxial, Proportional and Non-Proportional Loading

2318 Ogledov
2640 Prenosov
Izvoz citacije: ABNT
PEJKOWSKI, Łukasz ;SKIBICKI, Dariusz ;SEMPRUCH, Janusz .
High-Cycle Fatigue Behavior of Austenitic Steel and Pure Copper under Uniaxial, Proportional and Non-Proportional Loading. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 60, n.9, p. 549-560, june 2018. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/high-cycle-fatigue-behavior-of-austenitic-steel-and-pure-copper-under-uniaxial-proportional-and-non-proportional-loading/>. Date accessed: 16 jun. 2024. 
doi:http://dx.doi.org/10.5545/sv-jme.2013.1600.
Pejkowski, ., Skibicki, D., & Sempruch, J.
(2014).
High-Cycle Fatigue Behavior of Austenitic Steel and Pure Copper under Uniaxial, Proportional and Non-Proportional Loading.
Strojniški vestnik - Journal of Mechanical Engineering, 60(9), 549-560.
doi:http://dx.doi.org/10.5545/sv-jme.2013.1600
@article{sv-jmesv-jme.2013.1600,
	author = {Łukasz  Pejkowski and Dariusz  Skibicki and Janusz  Sempruch},
	title = {High-Cycle Fatigue Behavior of Austenitic Steel and Pure Copper under Uniaxial, Proportional and Non-Proportional Loading},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {60},
	number = {9},
	year = {2014},
	keywords = {multiaxial fatigue, high cycle fatigue, non-proportional load, fractography, out-of-phase},
	abstract = {Austenitic steel EN: X2CrNiMo17-12-2 (ASTM: 316L) and copper Cu-ETP (DIN: E-Cu58, EN: CW004A, ASTM: C11000) were subject to tension-compression, torsion and complex loads, including non-proportional loads. Non-proportionality of state of stress resulted from phase shift of value δ = 90° of load components with sine signals and variable ratio of shear to normal stress λ. On the basis of the results Wöhler’s curves were prepared presenting dependency of fatigue life to equivalent stress level. Their analysis shows that fatigue life is strictly connected with the value of coefficient λ. Existence of its critical value can also be noticed, which results in the highest fatigue life reduction. The value is different for each material. Also factographic tests were conducted showing the influence of level and type of load on fracture face.},
	issn = {0039-2480},	pages = {549-560},	doi = {10.5545/sv-jme.2013.1600},
	url = {https://www.sv-jme.eu/sl/article/high-cycle-fatigue-behavior-of-austenitic-steel-and-pure-copper-under-uniaxial-proportional-and-non-proportional-loading/}
}
Pejkowski, .,Skibicki, D.,Sempruch, J.
2014 June 60. High-Cycle Fatigue Behavior of Austenitic Steel and Pure Copper under Uniaxial, Proportional and Non-Proportional Loading. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 60:9
%A Pejkowski, Łukasz 
%A Skibicki, Dariusz 
%A Sempruch, Janusz 
%D 2014
%T High-Cycle Fatigue Behavior of Austenitic Steel and Pure Copper under Uniaxial, Proportional and Non-Proportional Loading
%B 2014
%9 multiaxial fatigue, high cycle fatigue, non-proportional load, fractography, out-of-phase
%! High-Cycle Fatigue Behavior of Austenitic Steel and Pure Copper under Uniaxial, Proportional and Non-Proportional Loading
%K multiaxial fatigue, high cycle fatigue, non-proportional load, fractography, out-of-phase
%X Austenitic steel EN: X2CrNiMo17-12-2 (ASTM: 316L) and copper Cu-ETP (DIN: E-Cu58, EN: CW004A, ASTM: C11000) were subject to tension-compression, torsion and complex loads, including non-proportional loads. Non-proportionality of state of stress resulted from phase shift of value δ = 90° of load components with sine signals and variable ratio of shear to normal stress λ. On the basis of the results Wöhler’s curves were prepared presenting dependency of fatigue life to equivalent stress level. Their analysis shows that fatigue life is strictly connected with the value of coefficient λ. Existence of its critical value can also be noticed, which results in the highest fatigue life reduction. The value is different for each material. Also factographic tests were conducted showing the influence of level and type of load on fracture face.
%U https://www.sv-jme.eu/sl/article/high-cycle-fatigue-behavior-of-austenitic-steel-and-pure-copper-under-uniaxial-proportional-and-non-proportional-loading/
%0 Journal Article
%R 10.5545/sv-jme.2013.1600
%& 549
%P 12
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 60
%N 9
%@ 0039-2480
%8 2018-06-28
%7 2018-06-28
Pejkowski, Łukasz, Dariusz  Skibicki, & Janusz  Sempruch.
"High-Cycle Fatigue Behavior of Austenitic Steel and Pure Copper under Uniaxial, Proportional and Non-Proportional Loading." Strojniški vestnik - Journal of Mechanical Engineering [Online], 60.9 (2014): 549-560. Web.  16 Jun. 2024
TY  - JOUR
AU  - Pejkowski, Łukasz 
AU  - Skibicki, Dariusz 
AU  - Sempruch, Janusz 
PY  - 2014
TI  - High-Cycle Fatigue Behavior of Austenitic Steel and Pure Copper under Uniaxial, Proportional and Non-Proportional Loading
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2013.1600
KW  - multiaxial fatigue, high cycle fatigue, non-proportional load, fractography, out-of-phase
N2  - Austenitic steel EN: X2CrNiMo17-12-2 (ASTM: 316L) and copper Cu-ETP (DIN: E-Cu58, EN: CW004A, ASTM: C11000) were subject to tension-compression, torsion and complex loads, including non-proportional loads. Non-proportionality of state of stress resulted from phase shift of value δ = 90° of load components with sine signals and variable ratio of shear to normal stress λ. On the basis of the results Wöhler’s curves were prepared presenting dependency of fatigue life to equivalent stress level. Their analysis shows that fatigue life is strictly connected with the value of coefficient λ. Existence of its critical value can also be noticed, which results in the highest fatigue life reduction. The value is different for each material. Also factographic tests were conducted showing the influence of level and type of load on fracture face.
UR  - https://www.sv-jme.eu/sl/article/high-cycle-fatigue-behavior-of-austenitic-steel-and-pure-copper-under-uniaxial-proportional-and-non-proportional-loading/
@article{{sv-jme}{sv-jme.2013.1600},
	author = {Pejkowski, ., Skibicki, D., Sempruch, J.},
	title = {High-Cycle Fatigue Behavior of Austenitic Steel and Pure Copper under Uniaxial, Proportional and Non-Proportional Loading},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {60},
	number = {9},
	year = {2014},
	doi = {10.5545/sv-jme.2013.1600},
	url = {https://www.sv-jme.eu/sl/article/high-cycle-fatigue-behavior-of-austenitic-steel-and-pure-copper-under-uniaxial-proportional-and-non-proportional-loading/}
}
TY  - JOUR
AU  - Pejkowski, Łukasz 
AU  - Skibicki, Dariusz 
AU  - Sempruch, Janusz 
PY  - 2018/06/28
TI  - High-Cycle Fatigue Behavior of Austenitic Steel and Pure Copper under Uniaxial, Proportional and Non-Proportional Loading
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 60, No 9 (2014): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2013.1600
KW  - multiaxial fatigue, high cycle fatigue, non-proportional load, fractography, out-of-phase
N2  - Austenitic steel EN: X2CrNiMo17-12-2 (ASTM: 316L) and copper Cu-ETP (DIN: E-Cu58, EN: CW004A, ASTM: C11000) were subject to tension-compression, torsion and complex loads, including non-proportional loads. Non-proportionality of state of stress resulted from phase shift of value δ = 90° of load components with sine signals and variable ratio of shear to normal stress λ. On the basis of the results Wöhler’s curves were prepared presenting dependency of fatigue life to equivalent stress level. Their analysis shows that fatigue life is strictly connected with the value of coefficient λ. Existence of its critical value can also be noticed, which results in the highest fatigue life reduction. The value is different for each material. Also factographic tests were conducted showing the influence of level and type of load on fracture face.
UR  - https://www.sv-jme.eu/sl/article/high-cycle-fatigue-behavior-of-austenitic-steel-and-pure-copper-under-uniaxial-proportional-and-non-proportional-loading/
Pejkowski, Łukasz, Skibicki, Dariusz, AND Sempruch, Janusz.
"High-Cycle Fatigue Behavior of Austenitic Steel and Pure Copper under Uniaxial, Proportional and Non-Proportional Loading" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 60 Number 9 (28 June 2018)

Avtorji

Inštitucije

  • University of Technology and Life Sciences in Bydgoszcz, Poland 1

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 60(2014)9, 549-560
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

https://doi.org/10.5545/sv-jme.2013.1600

Austenitic steel EN: X2CrNiMo17-12-2 (ASTM: 316L) and copper Cu-ETP (DIN: E-Cu58, EN: CW004A, ASTM: C11000) were subject to tension-compression, torsion and complex loads, including non-proportional loads. Non-proportionality of state of stress resulted from phase shift of value δ = 90° of load components with sine signals and variable ratio of shear to normal stress λ. On the basis of the results Wöhler’s curves were prepared presenting dependency of fatigue life to equivalent stress level. Their analysis shows that fatigue life is strictly connected with the value of coefficient λ. Existence of its critical value can also be noticed, which results in the highest fatigue life reduction. The value is different for each material. Also factographic tests were conducted showing the influence of level and type of load on fracture face.

multiaxial fatigue, high cycle fatigue, non-proportional load, fractography, out-of-phase