High-Speed Cutting of Soft Materials

930 Ogledov
763 Prenosov
Izvoz citacije: ABNT
PUŠAVEC, Franci ;KRAJNIK, Peter ;KOPAČ, Janez .
High-Speed Cutting of Soft Materials. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 52, n.11, p. 706-722, august 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/high-speed-cutting-of-soft-materials/>. Date accessed: 03 dec. 2020. 
doi:http://dx.doi.org/.
Pušavec, F., Krajnik, P., & Kopač, J.
(2006).
High-Speed Cutting of Soft Materials.
Strojniški vestnik - Journal of Mechanical Engineering, 52(11), 706-722.
doi:http://dx.doi.org/
@article{.,
	author = {Franci  Pušavec and Peter  Krajnik and Janez  Kopač},
	title = {High-Speed Cutting of Soft Materials},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {52},
	number = {11},
	year = {2006},
	keywords = {high-speed cutting; grey cast iron; tool wear; CBN (cubic boron nitride); burr; },
	abstract = {Commonly used materials like soft grey cast iron represent a serious load for cutting-tool materials during dry high-speed cutting (HSC) due to the material's unique combination of properties, such as high toughness, ductility, hard inclusions and chemical wear resistance. Although these properties are desirable design requirements, they pose a great challenge to machining due to the high temperatures and stresses generated during the cutting to ensure high surface quality, process capability and productivity. This loading reduces the bonding strength of the tool substrate, thereby accelerating the tool wear. This paper provides guidelines for increasing soft grey cast iron's machinability during HSC. The improved machinability of such grey cast iron during HSC can be achieved by combining the appropriate tool material and machining technology adjusted to the part requirements defined by a customer.},
	issn = {0039-2480},	pages = {706-722},	doi = {},
	url = {https://www.sv-jme.eu/sl/article/high-speed-cutting-of-soft-materials/}
}
Pušavec, F.,Krajnik, P.,Kopač, J.
2006 August 52. High-Speed Cutting of Soft Materials. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 52:11
%A Pušavec, Franci 
%A Krajnik, Peter 
%A Kopač, Janez 
%D 2006
%T High-Speed Cutting of Soft Materials
%B 2006
%9 high-speed cutting; grey cast iron; tool wear; CBN (cubic boron nitride); burr; 
%! High-Speed Cutting of Soft Materials
%K high-speed cutting; grey cast iron; tool wear; CBN (cubic boron nitride); burr; 
%X Commonly used materials like soft grey cast iron represent a serious load for cutting-tool materials during dry high-speed cutting (HSC) due to the material's unique combination of properties, such as high toughness, ductility, hard inclusions and chemical wear resistance. Although these properties are desirable design requirements, they pose a great challenge to machining due to the high temperatures and stresses generated during the cutting to ensure high surface quality, process capability and productivity. This loading reduces the bonding strength of the tool substrate, thereby accelerating the tool wear. This paper provides guidelines for increasing soft grey cast iron's machinability during HSC. The improved machinability of such grey cast iron during HSC can be achieved by combining the appropriate tool material and machining technology adjusted to the part requirements defined by a customer.
%U https://www.sv-jme.eu/sl/article/high-speed-cutting-of-soft-materials/
%0 Journal Article
%R 
%& 706
%P 17
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 52
%N 11
%@ 0039-2480
%8 2017-08-18
%7 2017-08-18
Pušavec, Franci, Peter  Krajnik, & Janez  Kopač.
"High-Speed Cutting of Soft Materials." Strojniški vestnik - Journal of Mechanical Engineering [Online], 52.11 (2006): 706-722. Web.  03 Dec. 2020
TY  - JOUR
AU  - Pušavec, Franci 
AU  - Krajnik, Peter 
AU  - Kopač, Janez 
PY  - 2006
TI  - High-Speed Cutting of Soft Materials
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - high-speed cutting; grey cast iron; tool wear; CBN (cubic boron nitride); burr; 
N2  - Commonly used materials like soft grey cast iron represent a serious load for cutting-tool materials during dry high-speed cutting (HSC) due to the material's unique combination of properties, such as high toughness, ductility, hard inclusions and chemical wear resistance. Although these properties are desirable design requirements, they pose a great challenge to machining due to the high temperatures and stresses generated during the cutting to ensure high surface quality, process capability and productivity. This loading reduces the bonding strength of the tool substrate, thereby accelerating the tool wear. This paper provides guidelines for increasing soft grey cast iron's machinability during HSC. The improved machinability of such grey cast iron during HSC can be achieved by combining the appropriate tool material and machining technology adjusted to the part requirements defined by a customer.
UR  - https://www.sv-jme.eu/sl/article/high-speed-cutting-of-soft-materials/
@article{{}{.},
	author = {Pušavec, F., Krajnik, P., Kopač, J.},
	title = {High-Speed Cutting of Soft Materials},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {52},
	number = {11},
	year = {2006},
	doi = {},
	url = {https://www.sv-jme.eu/sl/article/high-speed-cutting-of-soft-materials/}
}
TY  - JOUR
AU  - Pušavec, Franci 
AU  - Krajnik, Peter 
AU  - Kopač, Janez 
PY  - 2017/08/18
TI  - High-Speed Cutting of Soft Materials
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 52, No 11 (2006): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - high-speed cutting, grey cast iron, tool wear, CBN (cubic boron nitride), burr, 
N2  - Commonly used materials like soft grey cast iron represent a serious load for cutting-tool materials during dry high-speed cutting (HSC) due to the material's unique combination of properties, such as high toughness, ductility, hard inclusions and chemical wear resistance. Although these properties are desirable design requirements, they pose a great challenge to machining due to the high temperatures and stresses generated during the cutting to ensure high surface quality, process capability and productivity. This loading reduces the bonding strength of the tool substrate, thereby accelerating the tool wear. This paper provides guidelines for increasing soft grey cast iron's machinability during HSC. The improved machinability of such grey cast iron during HSC can be achieved by combining the appropriate tool material and machining technology adjusted to the part requirements defined by a customer.
UR  - https://www.sv-jme.eu/sl/article/high-speed-cutting-of-soft-materials/
Pušavec, Franci, Krajnik, Peter, AND Kopač, Janez.
"High-Speed Cutting of Soft Materials" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 52 Number 11 (18 August 2017)

Avtorji

Inštitucije

  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia
  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia
  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 52(2006)11, 706-722

Commonly used materials like soft grey cast iron represent a serious load for cutting-tool materials during dry high-speed cutting (HSC) due to the material's unique combination of properties, such as high toughness, ductility, hard inclusions and chemical wear resistance. Although these properties are desirable design requirements, they pose a great challenge to machining due to the high temperatures and stresses generated during the cutting to ensure high surface quality, process capability and productivity. This loading reduces the bonding strength of the tool substrate, thereby accelerating the tool wear. This paper provides guidelines for increasing soft grey cast iron's machinability during HSC. The improved machinability of such grey cast iron during HSC can be achieved by combining the appropriate tool material and machining technology adjusted to the part requirements defined by a customer.

high-speed cutting; grey cast iron; tool wear; CBN (cubic boron nitride); burr;