Incorporation of a Simplified Mechanical Joint Model into Numerical Analysis

2360 Ogledov
1278 Prenosov
Izvoz citacije: ABNT
GLAVAN, Mitja ;KLEMENC, Jernej ;MALNARIČ, Vili ;ŠERUGA, Domen .
Incorporation of a Simplified Mechanical Joint Model into Numerical Analysis. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 68, n.1, p. 3-13, january 2022. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/incorporation-of-a-simplified-mechanical-joint-model-into-numerical-analysis/>. Date accessed: 01 dec. 2024. 
doi:http://dx.doi.org/10.5545/sv-jme.2021.7329.
Glavan, M., Klemenc, J., Malnarič, V., & Šeruga, D.
(2022).
Incorporation of a Simplified Mechanical Joint Model into Numerical Analysis.
Strojniški vestnik - Journal of Mechanical Engineering, 68(1), 3-13.
doi:http://dx.doi.org/10.5545/sv-jme.2021.7329
@article{sv-jmesv-jme.2021.7329,
	author = {Mitja  Glavan and Jernej  Klemenc and Vili  Malnarič and Domen  Šeruga},
	title = {Incorporation of a Simplified Mechanical Joint Model into Numerical Analysis},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {68},
	number = {1},
	year = {2022},
	keywords = {mechanical joints; self-piercing riveting; clinch joint; FEM of mechanical joints; parameter optimization; simplified FE model; response surface; genetic algorithm; },
	abstract = {In the development of new joining technologies, incorporation of mechanical joints in computer analyses for the evaluation of structures can be carried out by a practical, simplified mechanical joint model. Here, two most frequently used joining technologies were analysed, a self-piercing rivet joint and a clinch joint. Physical tests of static load capacity of the joints were performed and numerical models for simulations were set-up. An optimization method was designed for estimating the material parameters of the mechanical joint for the needs of numerical analyses. For optimization purposes during the plan of experiments, a range of possible parameter values was investigated using a response surface method, results of simulations, results of physical tests and a genetic algorithm. The results of simulations using the optimal values of the material parameters are comparable to the experimental observations for the both joints.},
	issn = {0039-2480},	pages = {3-13},	doi = {10.5545/sv-jme.2021.7329},
	url = {https://www.sv-jme.eu/sl/article/incorporation-of-a-simplified-mechanical-joint-model-into-numerical-analysis/}
}
Glavan, M.,Klemenc, J.,Malnarič, V.,Šeruga, D.
2022 January 68. Incorporation of a Simplified Mechanical Joint Model into Numerical Analysis. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 68:1
%A Glavan, Mitja 
%A Klemenc, Jernej 
%A Malnarič, Vili 
%A Šeruga, Domen 
%D 2022
%T Incorporation of a Simplified Mechanical Joint Model into Numerical Analysis
%B 2022
%9 mechanical joints; self-piercing riveting; clinch joint; FEM of mechanical joints; parameter optimization; simplified FE model; response surface; genetic algorithm; 
%! Incorporation of a Simplified Mechanical Joint Model into Numerical Analysis
%K mechanical joints; self-piercing riveting; clinch joint; FEM of mechanical joints; parameter optimization; simplified FE model; response surface; genetic algorithm; 
%X In the development of new joining technologies, incorporation of mechanical joints in computer analyses for the evaluation of structures can be carried out by a practical, simplified mechanical joint model. Here, two most frequently used joining technologies were analysed, a self-piercing rivet joint and a clinch joint. Physical tests of static load capacity of the joints were performed and numerical models for simulations were set-up. An optimization method was designed for estimating the material parameters of the mechanical joint for the needs of numerical analyses. For optimization purposes during the plan of experiments, a range of possible parameter values was investigated using a response surface method, results of simulations, results of physical tests and a genetic algorithm. The results of simulations using the optimal values of the material parameters are comparable to the experimental observations for the both joints.
%U https://www.sv-jme.eu/sl/article/incorporation-of-a-simplified-mechanical-joint-model-into-numerical-analysis/
%0 Journal Article
%R 10.5545/sv-jme.2021.7329
%& 3
%P 11
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 68
%N 1
%@ 0039-2480
%8 2022-01-07
%7 2022-01-07
Glavan, Mitja, Jernej  Klemenc, Vili  Malnarič, & Domen  Šeruga.
"Incorporation of a Simplified Mechanical Joint Model into Numerical Analysis." Strojniški vestnik - Journal of Mechanical Engineering [Online], 68.1 (2022): 3-13. Web.  01 Dec. 2024
TY  - JOUR
AU  - Glavan, Mitja 
AU  - Klemenc, Jernej 
AU  - Malnarič, Vili 
AU  - Šeruga, Domen 
PY  - 2022
TI  - Incorporation of a Simplified Mechanical Joint Model into Numerical Analysis
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2021.7329
KW  - mechanical joints; self-piercing riveting; clinch joint; FEM of mechanical joints; parameter optimization; simplified FE model; response surface; genetic algorithm; 
N2  - In the development of new joining technologies, incorporation of mechanical joints in computer analyses for the evaluation of structures can be carried out by a practical, simplified mechanical joint model. Here, two most frequently used joining technologies were analysed, a self-piercing rivet joint and a clinch joint. Physical tests of static load capacity of the joints were performed and numerical models for simulations were set-up. An optimization method was designed for estimating the material parameters of the mechanical joint for the needs of numerical analyses. For optimization purposes during the plan of experiments, a range of possible parameter values was investigated using a response surface method, results of simulations, results of physical tests and a genetic algorithm. The results of simulations using the optimal values of the material parameters are comparable to the experimental observations for the both joints.
UR  - https://www.sv-jme.eu/sl/article/incorporation-of-a-simplified-mechanical-joint-model-into-numerical-analysis/
@article{{sv-jme}{sv-jme.2021.7329},
	author = {Glavan, M., Klemenc, J., Malnarič, V., Šeruga, D.},
	title = {Incorporation of a Simplified Mechanical Joint Model into Numerical Analysis},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {68},
	number = {1},
	year = {2022},
	doi = {10.5545/sv-jme.2021.7329},
	url = {https://www.sv-jme.eu/sl/article/incorporation-of-a-simplified-mechanical-joint-model-into-numerical-analysis/}
}
TY  - JOUR
AU  - Glavan, Mitja 
AU  - Klemenc, Jernej 
AU  - Malnarič, Vili 
AU  - Šeruga, Domen 
PY  - 2022/01/07
TI  - Incorporation of a Simplified Mechanical Joint Model into Numerical Analysis
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 68, No 1 (2022): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2021.7329
KW  - mechanical joints, self-piercing riveting, clinch joint, FEM of mechanical joints, parameter optimization, simplified FE model, response surface, genetic algorithm, 
N2  - In the development of new joining technologies, incorporation of mechanical joints in computer analyses for the evaluation of structures can be carried out by a practical, simplified mechanical joint model. Here, two most frequently used joining technologies were analysed, a self-piercing rivet joint and a clinch joint. Physical tests of static load capacity of the joints were performed and numerical models for simulations were set-up. An optimization method was designed for estimating the material parameters of the mechanical joint for the needs of numerical analyses. For optimization purposes during the plan of experiments, a range of possible parameter values was investigated using a response surface method, results of simulations, results of physical tests and a genetic algorithm. The results of simulations using the optimal values of the material parameters are comparable to the experimental observations for the both joints.
UR  - https://www.sv-jme.eu/sl/article/incorporation-of-a-simplified-mechanical-joint-model-into-numerical-analysis/
Glavan, Mitja, Klemenc, Jernej, Malnarič, Vili, AND Šeruga, Domen.
"Incorporation of a Simplified Mechanical Joint Model into Numerical Analysis" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 68 Number 1 (07 January 2022)

Avtorji

Inštitucije

  • TPV Automotive, Slovenia 1
  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia 2

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 68(2022)1, 3-13
© The Authors 2022. CC BY-NC 4.0 Int.

https://doi.org/10.5545/sv-jme.2021.7329

In the development of new joining technologies, incorporation of mechanical joints in computer analyses for the evaluation of structures can be carried out by a practical, simplified mechanical joint model. Here, two most frequently used joining technologies were analysed, a self-piercing rivet joint and a clinch joint. Physical tests of static load capacity of the joints were performed and numerical models for simulations were set-up. An optimization method was designed for estimating the material parameters of the mechanical joint for the needs of numerical analyses. For optimization purposes during the plan of experiments, a range of possible parameter values was investigated using a response surface method, results of simulations, results of physical tests and a genetic algorithm. The results of simulations using the optimal values of the material parameters are comparable to the experimental observations for the both joints.

mechanical joints; self-piercing riveting; clinch joint; FEM of mechanical joints; parameter optimization; simplified FE model; response surface; genetic algorithm;