Influence of input parameters on characteristics of EDM process

3034 Ogledov
4644 Prenosov
Izvoz citacije: ABNT
SHABGARD, M.R. ;SEYEDZAVVAR, M. ;OLIAEI, S. Nadimi Bavil.
Influence of input parameters on characteristics of EDM process. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 57, n.9, p. 689-696, june 2018. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/influence-of-input-parameters-on-characteristics-of-edm-process/>. Date accessed: 29 mar. 2024. 
doi:http://dx.doi.org/10.5545/sv-jme.2011.035.
Shabgard, M., Seyedzavvar, M., & Oliaei, S.
(2011).
Influence of input parameters on characteristics of EDM process.
Strojniški vestnik - Journal of Mechanical Engineering, 57(9), 689-696.
doi:http://dx.doi.org/10.5545/sv-jme.2011.035
@article{sv-jmesv-jme.2011.035,
	author = {M.R.  Shabgard and M.  Seyedzavvar and S. Nadimi Bavil Oliaei},
	title = {Influence of input parameters on characteristics of EDM process},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {57},
	number = {9},
	year = {2011},
	keywords = {EDM; MRR; TWR; Ra; White layer thickness; Depth of heat affected zone},
	abstract = {This paper presents the results of experimental studies carried out to conduct a comprehensive investigation on the influence of Electrical Discharge Machining (EDM) input parameters on characteristics of EDM process. The studied process characteristics included machining features, embracing material removal rate, tool wear ratio, and arithmetical mean roughness, as well surface integrity characteristics comprising of the thickness of white layer and the depth of heat affected zone of AISI H13 tool steel as workpiece. The experiments performed under the designed full factorial procedure, and the considered EDM input parameters included pulse on-time and pulse current. The results of this study could be utilized in the selection of optimum process parameters to achieve the desired EDM efficiency, surface roughness, and surface integrity when machining AISI H13 tool steel.},
	issn = {0039-2480},	pages = {689-696},	doi = {10.5545/sv-jme.2011.035},
	url = {https://www.sv-jme.eu/sl/article/influence-of-input-parameters-on-characteristics-of-edm-process/}
}
Shabgard, M.,Seyedzavvar, M.,Oliaei, S.
2011 June 57. Influence of input parameters on characteristics of EDM process. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 57:9
%A Shabgard, M.R. 
%A Seyedzavvar, M. 
%A Oliaei, S. Nadimi Bavil
%D 2011
%T Influence of input parameters on characteristics of EDM process
%B 2011
%9 EDM; MRR; TWR; Ra; White layer thickness; Depth of heat affected zone
%! Influence of input parameters on characteristics of EDM process
%K EDM; MRR; TWR; Ra; White layer thickness; Depth of heat affected zone
%X This paper presents the results of experimental studies carried out to conduct a comprehensive investigation on the influence of Electrical Discharge Machining (EDM) input parameters on characteristics of EDM process. The studied process characteristics included machining features, embracing material removal rate, tool wear ratio, and arithmetical mean roughness, as well surface integrity characteristics comprising of the thickness of white layer and the depth of heat affected zone of AISI H13 tool steel as workpiece. The experiments performed under the designed full factorial procedure, and the considered EDM input parameters included pulse on-time and pulse current. The results of this study could be utilized in the selection of optimum process parameters to achieve the desired EDM efficiency, surface roughness, and surface integrity when machining AISI H13 tool steel.
%U https://www.sv-jme.eu/sl/article/influence-of-input-parameters-on-characteristics-of-edm-process/
%0 Journal Article
%R 10.5545/sv-jme.2011.035
%& 689
%P 8
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 57
%N 9
%@ 0039-2480
%8 2018-06-29
%7 2018-06-29
Shabgard, M.R., M.  Seyedzavvar, & S. Nadimi Bavil Oliaei.
"Influence of input parameters on characteristics of EDM process." Strojniški vestnik - Journal of Mechanical Engineering [Online], 57.9 (2011): 689-696. Web.  29 Mar. 2024
TY  - JOUR
AU  - Shabgard, M.R. 
AU  - Seyedzavvar, M. 
AU  - Oliaei, S. Nadimi Bavil
PY  - 2011
TI  - Influence of input parameters on characteristics of EDM process
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2011.035
KW  - EDM; MRR; TWR; Ra; White layer thickness; Depth of heat affected zone
N2  - This paper presents the results of experimental studies carried out to conduct a comprehensive investigation on the influence of Electrical Discharge Machining (EDM) input parameters on characteristics of EDM process. The studied process characteristics included machining features, embracing material removal rate, tool wear ratio, and arithmetical mean roughness, as well surface integrity characteristics comprising of the thickness of white layer and the depth of heat affected zone of AISI H13 tool steel as workpiece. The experiments performed under the designed full factorial procedure, and the considered EDM input parameters included pulse on-time and pulse current. The results of this study could be utilized in the selection of optimum process parameters to achieve the desired EDM efficiency, surface roughness, and surface integrity when machining AISI H13 tool steel.
UR  - https://www.sv-jme.eu/sl/article/influence-of-input-parameters-on-characteristics-of-edm-process/
@article{{sv-jme}{sv-jme.2011.035},
	author = {Shabgard, M., Seyedzavvar, M., Oliaei, S.},
	title = {Influence of input parameters on characteristics of EDM process},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {57},
	number = {9},
	year = {2011},
	doi = {10.5545/sv-jme.2011.035},
	url = {https://www.sv-jme.eu/sl/article/influence-of-input-parameters-on-characteristics-of-edm-process/}
}
TY  - JOUR
AU  - Shabgard, M.R. 
AU  - Seyedzavvar, M. 
AU  - Oliaei, S. Nadimi Bavil
PY  - 2018/06/29
TI  - Influence of input parameters on characteristics of EDM process
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 57, No 9 (2011): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2011.035
KW  - EDM, MRR, TWR, Ra, White layer thickness, Depth of heat affected zone
N2  - This paper presents the results of experimental studies carried out to conduct a comprehensive investigation on the influence of Electrical Discharge Machining (EDM) input parameters on characteristics of EDM process. The studied process characteristics included machining features, embracing material removal rate, tool wear ratio, and arithmetical mean roughness, as well surface integrity characteristics comprising of the thickness of white layer and the depth of heat affected zone of AISI H13 tool steel as workpiece. The experiments performed under the designed full factorial procedure, and the considered EDM input parameters included pulse on-time and pulse current. The results of this study could be utilized in the selection of optimum process parameters to achieve the desired EDM efficiency, surface roughness, and surface integrity when machining AISI H13 tool steel.
UR  - https://www.sv-jme.eu/sl/article/influence-of-input-parameters-on-characteristics-of-edm-process/
Shabgard, M.R., Seyedzavvar, M., AND Oliaei, S..
"Influence of input parameters on characteristics of EDM process" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 57 Number 9 (29 June 2018)

Avtorji

Inštitucije

  • Department of Mechanical Engineering, Tabriz University, Tabriz 1
  • Department of Mechanical Engineering, Middle East Technical University, Ankara 2

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 57(2011)9, 689-696
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

https://doi.org/10.5545/sv-jme.2011.035

This paper presents the results of experimental studies carried out to conduct a comprehensive investigation on the influence of Electrical Discharge Machining (EDM) input parameters on characteristics of EDM process. The studied process characteristics included machining features, embracing material removal rate, tool wear ratio, and arithmetical mean roughness, as well surface integrity characteristics comprising of the thickness of white layer and the depth of heat affected zone of AISI H13 tool steel as workpiece. The experiments performed under the designed full factorial procedure, and the considered EDM input parameters included pulse on-time and pulse current. The results of this study could be utilized in the selection of optimum process parameters to achieve the desired EDM efficiency, surface roughness, and surface integrity when machining AISI H13 tool steel.

EDM; MRR; TWR; Ra; White layer thickness; Depth of heat affected zone