LIEBRECHT, Jürgen ;SI, Xiaojiang ;SAUER, Bernd ;SCHWARZE, Hubert . Investigation of Drag and Churning Losses on Tapered Roller Bearings. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 61, n.6, p. 399-408, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/investigation-of-drag-and-churning-losses-on-tapered-roller-bearings/>. Date accessed: 14 nov. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2015.2490.
Liebrecht, J., Si, X., Sauer, B., & Schwarze, H. (2015). Investigation of Drag and Churning Losses on Tapered Roller Bearings. Strojniški vestnik - Journal of Mechanical Engineering, 61(6), 399-408. doi:http://dx.doi.org/10.5545/sv-jme.2015.2490
@article{sv-jmesv-jme.2015.2490, author = {Jürgen Liebrecht and Xiaojiang Si and Bernd Sauer and Hubert Schwarze}, title = {Investigation of Drag and Churning Losses on Tapered Roller Bearings}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {61}, number = {6}, year = {2015}, keywords = {tapered roller bearing; churning losses; drag losses; frictional torque; CFD simulation}, abstract = {Today there are a lot of findings to determine losses caused by contact forces inside roller bearings. But there are also losses in bearings caused by displacement of lubricant. These are known as churning or drag losses. In general the bearing manufacturers give recommendations how to reduce them. The most common solution is the reduction of the oil bath level. Some bearing manufacturers even provide models or empirical equations to calculate the resistance resulting from rolling elements moving through the oil. These models take the operating conditions such as the viscosity of the oil at the operating temperature, oil level, bearing type and rotational speed into consideration. A comparison between calculated and experimental results shows that there is still a deviation because of further effects which are not considered in those analytical models. This paper presents experimental studies and numerical simulations which illustrate the influence of the oil quantity on the total friction torque of tapered roller bearings and identify the resulting losses.}, issn = {0039-2480}, pages = {399-408}, doi = {10.5545/sv-jme.2015.2490}, url = {https://www.sv-jme.eu/sl/article/investigation-of-drag-and-churning-losses-on-tapered-roller-bearings/} }
Liebrecht, J.,Si, X.,Sauer, B.,Schwarze, H. 2015 June 61. Investigation of Drag and Churning Losses on Tapered Roller Bearings. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 61:6
%A Liebrecht, Jürgen %A Si, Xiaojiang %A Sauer, Bernd %A Schwarze, Hubert %D 2015 %T Investigation of Drag and Churning Losses on Tapered Roller Bearings %B 2015 %9 tapered roller bearing; churning losses; drag losses; frictional torque; CFD simulation %! Investigation of Drag and Churning Losses on Tapered Roller Bearings %K tapered roller bearing; churning losses; drag losses; frictional torque; CFD simulation %X Today there are a lot of findings to determine losses caused by contact forces inside roller bearings. But there are also losses in bearings caused by displacement of lubricant. These are known as churning or drag losses. In general the bearing manufacturers give recommendations how to reduce them. The most common solution is the reduction of the oil bath level. Some bearing manufacturers even provide models or empirical equations to calculate the resistance resulting from rolling elements moving through the oil. These models take the operating conditions such as the viscosity of the oil at the operating temperature, oil level, bearing type and rotational speed into consideration. A comparison between calculated and experimental results shows that there is still a deviation because of further effects which are not considered in those analytical models. This paper presents experimental studies and numerical simulations which illustrate the influence of the oil quantity on the total friction torque of tapered roller bearings and identify the resulting losses. %U https://www.sv-jme.eu/sl/article/investigation-of-drag-and-churning-losses-on-tapered-roller-bearings/ %0 Journal Article %R 10.5545/sv-jme.2015.2490 %& 399 %P 10 %J Strojniški vestnik - Journal of Mechanical Engineering %V 61 %N 6 %@ 0039-2480 %8 2018-06-27 %7 2018-06-27
Liebrecht, Jürgen, Xiaojiang Si, Bernd Sauer, & Hubert Schwarze. "Investigation of Drag and Churning Losses on Tapered Roller Bearings." Strojniški vestnik - Journal of Mechanical Engineering [Online], 61.6 (2015): 399-408. Web. 14 Nov. 2024
TY - JOUR AU - Liebrecht, Jürgen AU - Si, Xiaojiang AU - Sauer, Bernd AU - Schwarze, Hubert PY - 2015 TI - Investigation of Drag and Churning Losses on Tapered Roller Bearings JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2015.2490 KW - tapered roller bearing; churning losses; drag losses; frictional torque; CFD simulation N2 - Today there are a lot of findings to determine losses caused by contact forces inside roller bearings. But there are also losses in bearings caused by displacement of lubricant. These are known as churning or drag losses. In general the bearing manufacturers give recommendations how to reduce them. The most common solution is the reduction of the oil bath level. Some bearing manufacturers even provide models or empirical equations to calculate the resistance resulting from rolling elements moving through the oil. These models take the operating conditions such as the viscosity of the oil at the operating temperature, oil level, bearing type and rotational speed into consideration. A comparison between calculated and experimental results shows that there is still a deviation because of further effects which are not considered in those analytical models. This paper presents experimental studies and numerical simulations which illustrate the influence of the oil quantity on the total friction torque of tapered roller bearings and identify the resulting losses. UR - https://www.sv-jme.eu/sl/article/investigation-of-drag-and-churning-losses-on-tapered-roller-bearings/
@article{{sv-jme}{sv-jme.2015.2490}, author = {Liebrecht, J., Si, X., Sauer, B., Schwarze, H.}, title = {Investigation of Drag and Churning Losses on Tapered Roller Bearings}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {61}, number = {6}, year = {2015}, doi = {10.5545/sv-jme.2015.2490}, url = {https://www.sv-jme.eu/sl/article/investigation-of-drag-and-churning-losses-on-tapered-roller-bearings/} }
TY - JOUR AU - Liebrecht, Jürgen AU - Si, Xiaojiang AU - Sauer, Bernd AU - Schwarze, Hubert PY - 2018/06/27 TI - Investigation of Drag and Churning Losses on Tapered Roller Bearings JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 61, No 6 (2015): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2015.2490 KW - tapered roller bearing, churning losses, drag losses, frictional torque, CFD simulation N2 - Today there are a lot of findings to determine losses caused by contact forces inside roller bearings. But there are also losses in bearings caused by displacement of lubricant. These are known as churning or drag losses. In general the bearing manufacturers give recommendations how to reduce them. The most common solution is the reduction of the oil bath level. Some bearing manufacturers even provide models or empirical equations to calculate the resistance resulting from rolling elements moving through the oil. These models take the operating conditions such as the viscosity of the oil at the operating temperature, oil level, bearing type and rotational speed into consideration. A comparison between calculated and experimental results shows that there is still a deviation because of further effects which are not considered in those analytical models. This paper presents experimental studies and numerical simulations which illustrate the influence of the oil quantity on the total friction torque of tapered roller bearings and identify the resulting losses. UR - https://www.sv-jme.eu/sl/article/investigation-of-drag-and-churning-losses-on-tapered-roller-bearings/
Liebrecht, Jürgen, Si, Xiaojiang, Sauer, Bernd, AND Schwarze, Hubert. "Investigation of Drag and Churning Losses on Tapered Roller Bearings" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 61 Number 6 (27 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 61(2015)6, 399-408
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
Today there are a lot of findings to determine losses caused by contact forces inside roller bearings. But there are also losses in bearings caused by displacement of lubricant. These are known as churning or drag losses. In general the bearing manufacturers give recommendations how to reduce them. The most common solution is the reduction of the oil bath level. Some bearing manufacturers even provide models or empirical equations to calculate the resistance resulting from rolling elements moving through the oil. These models take the operating conditions such as the viscosity of the oil at the operating temperature, oil level, bearing type and rotational speed into consideration. A comparison between calculated and experimental results shows that there is still a deviation because of further effects which are not considered in those analytical models. This paper presents experimental studies and numerical simulations which illustrate the influence of the oil quantity on the total friction torque of tapered roller bearings and identify the resulting losses.