JOVANOVIC, Jelena R.;MILANOVIC, Dragan D.;DJUKIC, Radisav D.. Manufacturing Cycle Time Analysis and Scheduling to Optimize Its Duration. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 60, n.7-8, p. 512-524, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/manufacturing-cycle-time-analysis-and-scheduling-to-optimize-its-duration/>. Date accessed: 01 dec. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2013.1523.
Jovanovic, J., Milanovic, D., & Djukic, R. (2014). Manufacturing Cycle Time Analysis and Scheduling to Optimize Its Duration. Strojniški vestnik - Journal of Mechanical Engineering, 60(7-8), 512-524. doi:http://dx.doi.org/10.5545/sv-jme.2013.1523
@article{sv-jmesv-jme.2013.1523, author = {Jelena R. Jovanovic and Dragan D. Milanovic and Radisav D. Djukic}, title = {Manufacturing Cycle Time Analysis and Scheduling to Optimize Its Duration}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {60}, number = {7-8}, year = {2014}, keywords = {manufacturing cycle, manufacturing capacity utilization level, production losses, material flow, serial production}, abstract = {This paper reports the results of investigations on manufacturing cycle times for special-purpose products manufactured at ‘Sloboda’ Co. - Cacak, Serbia. The Company performs serial production characterized by complex and diverse technologies, alternative solutions and combined mode of workpiece move in the manufacturing process. Due to various approaches to this problem, analysis has been carried out of previous investigations and theoretical base is provided for the technological cycle and factors affecting the manufacturing cycle time. Technological and production documentation of ‘Sloboda’ Co. has been analyzed to establish the technological and real manufacturing cycle times, total losses and flow coefficient. The paper describes the original approach to production cycle scheduling on the grounds of investigations of manufacturing capacity utilization level and causes of loss in order to measure their effects and to reduce the flow coefficient to optimum level. The results are a segment of complex studies on the production cycle management of complex products, accomplished in ‘Sloboda’ Co. in the period 2010-2012.}, issn = {0039-2480}, pages = {512-524}, doi = {10.5545/sv-jme.2013.1523}, url = {https://www.sv-jme.eu/sl/article/manufacturing-cycle-time-analysis-and-scheduling-to-optimize-its-duration/} }
Jovanovic, J.,Milanovic, D.,Djukic, R. 2014 June 60. Manufacturing Cycle Time Analysis and Scheduling to Optimize Its Duration. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 60:7-8
%A Jovanovic, Jelena R. %A Milanovic, Dragan D. %A Djukic, Radisav D. %D 2014 %T Manufacturing Cycle Time Analysis and Scheduling to Optimize Its Duration %B 2014 %9 manufacturing cycle, manufacturing capacity utilization level, production losses, material flow, serial production %! Manufacturing Cycle Time Analysis and Scheduling to Optimize Its Duration %K manufacturing cycle, manufacturing capacity utilization level, production losses, material flow, serial production %X This paper reports the results of investigations on manufacturing cycle times for special-purpose products manufactured at ‘Sloboda’ Co. - Cacak, Serbia. The Company performs serial production characterized by complex and diverse technologies, alternative solutions and combined mode of workpiece move in the manufacturing process. Due to various approaches to this problem, analysis has been carried out of previous investigations and theoretical base is provided for the technological cycle and factors affecting the manufacturing cycle time. Technological and production documentation of ‘Sloboda’ Co. has been analyzed to establish the technological and real manufacturing cycle times, total losses and flow coefficient. The paper describes the original approach to production cycle scheduling on the grounds of investigations of manufacturing capacity utilization level and causes of loss in order to measure their effects and to reduce the flow coefficient to optimum level. The results are a segment of complex studies on the production cycle management of complex products, accomplished in ‘Sloboda’ Co. in the period 2010-2012. %U https://www.sv-jme.eu/sl/article/manufacturing-cycle-time-analysis-and-scheduling-to-optimize-its-duration/ %0 Journal Article %R 10.5545/sv-jme.2013.1523 %& 512 %P 13 %J Strojniški vestnik - Journal of Mechanical Engineering %V 60 %N 7-8 %@ 0039-2480 %8 2018-06-28 %7 2018-06-28
Jovanovic, Jelena, Dragan D. Milanovic, & Radisav D. Djukic. "Manufacturing Cycle Time Analysis and Scheduling to Optimize Its Duration." Strojniški vestnik - Journal of Mechanical Engineering [Online], 60.7-8 (2014): 512-524. Web. 01 Dec. 2024
TY - JOUR AU - Jovanovic, Jelena R. AU - Milanovic, Dragan D. AU - Djukic, Radisav D. PY - 2014 TI - Manufacturing Cycle Time Analysis and Scheduling to Optimize Its Duration JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2013.1523 KW - manufacturing cycle, manufacturing capacity utilization level, production losses, material flow, serial production N2 - This paper reports the results of investigations on manufacturing cycle times for special-purpose products manufactured at ‘Sloboda’ Co. - Cacak, Serbia. The Company performs serial production characterized by complex and diverse technologies, alternative solutions and combined mode of workpiece move in the manufacturing process. Due to various approaches to this problem, analysis has been carried out of previous investigations and theoretical base is provided for the technological cycle and factors affecting the manufacturing cycle time. Technological and production documentation of ‘Sloboda’ Co. has been analyzed to establish the technological and real manufacturing cycle times, total losses and flow coefficient. The paper describes the original approach to production cycle scheduling on the grounds of investigations of manufacturing capacity utilization level and causes of loss in order to measure their effects and to reduce the flow coefficient to optimum level. The results are a segment of complex studies on the production cycle management of complex products, accomplished in ‘Sloboda’ Co. in the period 2010-2012. UR - https://www.sv-jme.eu/sl/article/manufacturing-cycle-time-analysis-and-scheduling-to-optimize-its-duration/
@article{{sv-jme}{sv-jme.2013.1523}, author = {Jovanovic, J., Milanovic, D., Djukic, R.}, title = {Manufacturing Cycle Time Analysis and Scheduling to Optimize Its Duration}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {60}, number = {7-8}, year = {2014}, doi = {10.5545/sv-jme.2013.1523}, url = {https://www.sv-jme.eu/sl/article/manufacturing-cycle-time-analysis-and-scheduling-to-optimize-its-duration/} }
TY - JOUR AU - Jovanovic, Jelena R. AU - Milanovic, Dragan D. AU - Djukic, Radisav D. PY - 2018/06/28 TI - Manufacturing Cycle Time Analysis and Scheduling to Optimize Its Duration JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 60, No 7-8 (2014): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2013.1523 KW - manufacturing cycle, manufacturing capacity utilization level, production losses, material flow, serial production N2 - This paper reports the results of investigations on manufacturing cycle times for special-purpose products manufactured at ‘Sloboda’ Co. - Cacak, Serbia. The Company performs serial production characterized by complex and diverse technologies, alternative solutions and combined mode of workpiece move in the manufacturing process. Due to various approaches to this problem, analysis has been carried out of previous investigations and theoretical base is provided for the technological cycle and factors affecting the manufacturing cycle time. Technological and production documentation of ‘Sloboda’ Co. has been analyzed to establish the technological and real manufacturing cycle times, total losses and flow coefficient. The paper describes the original approach to production cycle scheduling on the grounds of investigations of manufacturing capacity utilization level and causes of loss in order to measure their effects and to reduce the flow coefficient to optimum level. The results are a segment of complex studies on the production cycle management of complex products, accomplished in ‘Sloboda’ Co. in the period 2010-2012. UR - https://www.sv-jme.eu/sl/article/manufacturing-cycle-time-analysis-and-scheduling-to-optimize-its-duration/
Jovanovic, Jelena, Milanovic, Dragan, AND Djukic, Radisav. "Manufacturing Cycle Time Analysis and Scheduling to Optimize Its Duration" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 60 Number 7-8 (28 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 60(2014)7-8, 512-524
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
This paper reports the results of investigations on manufacturing cycle times for special-purpose products manufactured at ‘Sloboda’ Co. - Cacak, Serbia. The Company performs serial production characterized by complex and diverse technologies, alternative solutions and combined mode of workpiece move in the manufacturing process. Due to various approaches to this problem, analysis has been carried out of previous investigations and theoretical base is provided for the technological cycle and factors affecting the manufacturing cycle time. Technological and production documentation of ‘Sloboda’ Co. has been analyzed to establish the technological and real manufacturing cycle times, total losses and flow coefficient. The paper describes the original approach to production cycle scheduling on the grounds of investigations of manufacturing capacity utilization level and causes of loss in order to measure their effects and to reduce the flow coefficient to optimum level. The results are a segment of complex studies on the production cycle management of complex products, accomplished in ‘Sloboda’ Co. in the period 2010-2012.