Measurement of Involute Profile with Small Clamping Eccentricity in a Gear Measuring Center

2407 Ogledov
2467 Prenosov
Izvoz citacije: ABNT
LIANFU, Han ;WENYAN, Tang ;JUN, Wang ;CHANGFENG, Fu .
Measurement of Involute Profile with Small Clamping Eccentricity in a Gear Measuring Center. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 59, n.4, p. 269-278, june 2018. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/measurement-of-involute-profile-with-small-clamping-eccentricity-in-a-gear-measuring-center/>. Date accessed: 10 dec. 2024. 
doi:http://dx.doi.org/10.5545/sv-jme.2012.478.
Lianfu, H., Wenyan, T., Jun, W., & Changfeng, F.
(2013).
Measurement of Involute Profile with Small Clamping Eccentricity in a Gear Measuring Center.
Strojniški vestnik - Journal of Mechanical Engineering, 59(4), 269-278.
doi:http://dx.doi.org/10.5545/sv-jme.2012.478
@article{sv-jmesv-jme.2012.478,
	author = {Han  Lianfu and Tang  Wenyan and Wang  Jun and Fu  Changfeng},
	title = {Measurement of Involute Profile with Small Clamping Eccentricity in a Gear Measuring Center},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {59},
	number = {4},
	year = {2013},
	keywords = {gear measuring center, clamping eccentricity, involute profile, measurement, evaluation},
	abstract = {This paper studies the influence of small clamping eccentricity on the measurement and evaluation of involute profile, analyzes the cause of clamping eccentric error, establishes a clamping eccentric error compensation model, and introduces a computing method of clamping eccentric parameters. Experimental testing of the computing method of clamping eccentric parameters proves that the computing method of clamping eccentric parameters is correct and feasible when the clamping eccentric value is within three quarters of the measurement range of the probe. The results of the clamping eccentricity error compensation experiment show that the clamping eccentric error compensation model can compensate measurement results to the results attained under operating conditions, and achieve precision measurement of involute profiles. The highest allowed clamping eccentric value can be extended to three quarters of the measurement range of the probe by the clamping eccentricity error compensation model proposed in this paper, thereby saving time otherwise spent adjusting for clamping eccentricity.},
	issn = {0039-2480},	pages = {269-278},	doi = {10.5545/sv-jme.2012.478},
	url = {https://www.sv-jme.eu/sl/article/measurement-of-involute-profile-with-small-clamping-eccentricity-in-a-gear-measuring-center/}
}
Lianfu, H.,Wenyan, T.,Jun, W.,Changfeng, F.
2013 June 59. Measurement of Involute Profile with Small Clamping Eccentricity in a Gear Measuring Center. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 59:4
%A Lianfu, Han 
%A Wenyan, Tang 
%A Jun, Wang 
%A Changfeng, Fu 
%D 2013
%T Measurement of Involute Profile with Small Clamping Eccentricity in a Gear Measuring Center
%B 2013
%9 gear measuring center, clamping eccentricity, involute profile, measurement, evaluation
%! Measurement of Involute Profile with Small Clamping Eccentricity in a Gear Measuring Center
%K gear measuring center, clamping eccentricity, involute profile, measurement, evaluation
%X This paper studies the influence of small clamping eccentricity on the measurement and evaluation of involute profile, analyzes the cause of clamping eccentric error, establishes a clamping eccentric error compensation model, and introduces a computing method of clamping eccentric parameters. Experimental testing of the computing method of clamping eccentric parameters proves that the computing method of clamping eccentric parameters is correct and feasible when the clamping eccentric value is within three quarters of the measurement range of the probe. The results of the clamping eccentricity error compensation experiment show that the clamping eccentric error compensation model can compensate measurement results to the results attained under operating conditions, and achieve precision measurement of involute profiles. The highest allowed clamping eccentric value can be extended to three quarters of the measurement range of the probe by the clamping eccentricity error compensation model proposed in this paper, thereby saving time otherwise spent adjusting for clamping eccentricity.
%U https://www.sv-jme.eu/sl/article/measurement-of-involute-profile-with-small-clamping-eccentricity-in-a-gear-measuring-center/
%0 Journal Article
%R 10.5545/sv-jme.2012.478
%& 269
%P 10
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 59
%N 4
%@ 0039-2480
%8 2018-06-28
%7 2018-06-28
Lianfu, Han, Tang  Wenyan, Wang  Jun, & Fu  Changfeng.
"Measurement of Involute Profile with Small Clamping Eccentricity in a Gear Measuring Center." Strojniški vestnik - Journal of Mechanical Engineering [Online], 59.4 (2013): 269-278. Web.  10 Dec. 2024
TY  - JOUR
AU  - Lianfu, Han 
AU  - Wenyan, Tang 
AU  - Jun, Wang 
AU  - Changfeng, Fu 
PY  - 2013
TI  - Measurement of Involute Profile with Small Clamping Eccentricity in a Gear Measuring Center
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2012.478
KW  - gear measuring center, clamping eccentricity, involute profile, measurement, evaluation
N2  - This paper studies the influence of small clamping eccentricity on the measurement and evaluation of involute profile, analyzes the cause of clamping eccentric error, establishes a clamping eccentric error compensation model, and introduces a computing method of clamping eccentric parameters. Experimental testing of the computing method of clamping eccentric parameters proves that the computing method of clamping eccentric parameters is correct and feasible when the clamping eccentric value is within three quarters of the measurement range of the probe. The results of the clamping eccentricity error compensation experiment show that the clamping eccentric error compensation model can compensate measurement results to the results attained under operating conditions, and achieve precision measurement of involute profiles. The highest allowed clamping eccentric value can be extended to three quarters of the measurement range of the probe by the clamping eccentricity error compensation model proposed in this paper, thereby saving time otherwise spent adjusting for clamping eccentricity.
UR  - https://www.sv-jme.eu/sl/article/measurement-of-involute-profile-with-small-clamping-eccentricity-in-a-gear-measuring-center/
@article{{sv-jme}{sv-jme.2012.478},
	author = {Lianfu, H., Wenyan, T., Jun, W., Changfeng, F.},
	title = {Measurement of Involute Profile with Small Clamping Eccentricity in a Gear Measuring Center},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {59},
	number = {4},
	year = {2013},
	doi = {10.5545/sv-jme.2012.478},
	url = {https://www.sv-jme.eu/sl/article/measurement-of-involute-profile-with-small-clamping-eccentricity-in-a-gear-measuring-center/}
}
TY  - JOUR
AU  - Lianfu, Han 
AU  - Wenyan, Tang 
AU  - Jun, Wang 
AU  - Changfeng, Fu 
PY  - 2018/06/28
TI  - Measurement of Involute Profile with Small Clamping Eccentricity in a Gear Measuring Center
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 59, No 4 (2013): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2012.478
KW  - gear measuring center, clamping eccentricity, involute profile, measurement, evaluation
N2  - This paper studies the influence of small clamping eccentricity on the measurement and evaluation of involute profile, analyzes the cause of clamping eccentric error, establishes a clamping eccentric error compensation model, and introduces a computing method of clamping eccentric parameters. Experimental testing of the computing method of clamping eccentric parameters proves that the computing method of clamping eccentric parameters is correct and feasible when the clamping eccentric value is within three quarters of the measurement range of the probe. The results of the clamping eccentricity error compensation experiment show that the clamping eccentric error compensation model can compensate measurement results to the results attained under operating conditions, and achieve precision measurement of involute profiles. The highest allowed clamping eccentric value can be extended to three quarters of the measurement range of the probe by the clamping eccentricity error compensation model proposed in this paper, thereby saving time otherwise spent adjusting for clamping eccentricity.
UR  - https://www.sv-jme.eu/sl/article/measurement-of-involute-profile-with-small-clamping-eccentricity-in-a-gear-measuring-center/
Lianfu, Han, Wenyan, Tang, Jun, Wang, AND Changfeng, Fu.
"Measurement of Involute Profile with Small Clamping Eccentricity in a Gear Measuring Center" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 59 Number 4 (28 June 2018)

Avtorji

Inštitucije

  • Harbin Institute of Technology, Institute of Precision Instrument / Northeast Petroleum University, School of Electronic Science, China 1
  • Harbin Institute of Technology, Institute of Precision Instrument, China 2
  • Northeast Petroleum University, School of Electronic Science, China 3

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 59(2013)4, 269-278
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

https://doi.org/10.5545/sv-jme.2012.478

This paper studies the influence of small clamping eccentricity on the measurement and evaluation of involute profile, analyzes the cause of clamping eccentric error, establishes a clamping eccentric error compensation model, and introduces a computing method of clamping eccentric parameters. Experimental testing of the computing method of clamping eccentric parameters proves that the computing method of clamping eccentric parameters is correct and feasible when the clamping eccentric value is within three quarters of the measurement range of the probe. The results of the clamping eccentricity error compensation experiment show that the clamping eccentric error compensation model can compensate measurement results to the results attained under operating conditions, and achieve precision measurement of involute profiles. The highest allowed clamping eccentric value can be extended to three quarters of the measurement range of the probe by the clamping eccentricity error compensation model proposed in this paper, thereby saving time otherwise spent adjusting for clamping eccentricity.

gear measuring center, clamping eccentricity, involute profile, measurement, evaluation