Measurement of the Surface-Temperature Field in a Fog Lamp Using Resistance-Based Temperature Detectors

1766 Ogledov
945 Prenosov
Izvoz citacije: ABNT
WAGNER, Andrej ;BAJSIĆ, Ivan ;FAJDIGA, Matija .
Measurement of the Surface-Temperature Field in a Fog Lamp Using Resistance-Based Temperature Detectors. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 50, n.2, p. 72-79, july 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/measurement-of-the-surface-temperature-field-in-a-fog-lamp-using-resistance-based-temperature-detectors/>. Date accessed: 14 oct. 2024. 
doi:http://dx.doi.org/.
Wagner, A., Bajsić, I., & Fajdiga, M.
(2004).
Measurement of the Surface-Temperature Field in a Fog Lamp Using Resistance-Based Temperature Detectors.
Strojniški vestnik - Journal of Mechanical Engineering, 50(2), 72-79.
doi:http://dx.doi.org/
@article{.,
	author = {Andrej  Wagner and Ivan  Bajsić and Matija  Fajdiga},
	title = {Measurement of the Surface-Temperature Field in a Fog Lamp Using Resistance-Based Temperature Detectors},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {50},
	number = {2},
	year = {2004},
	keywords = {vehicle headlamps; temperature fields; temperature measurements; experimental methods; },
	abstract = {Modern headlamps are made from low-cost plastic materials that are very convenient for the design of these products. However, plastic materials are not suitable for use at high temperatures. The result can be deformations that result in problems with the photometric properties and with the sealing of the headlamp. In order to predict the deformations the temperature was measured at significant points on the outer and inner parts of the headlamp housing, on the reflector and on the shield of the lamp. The measurements were made with a platinum-resistance temperature detector (RTD). The results of the measurements were then used in a finite element method (FEM) analysis to determine the deformations of the headlamp housing.},
	issn = {0039-2480},	pages = {72-79},	doi = {},
	url = {https://www.sv-jme.eu/sl/article/measurement-of-the-surface-temperature-field-in-a-fog-lamp-using-resistance-based-temperature-detectors/}
}
Wagner, A.,Bajsić, I.,Fajdiga, M.
2004 July 50. Measurement of the Surface-Temperature Field in a Fog Lamp Using Resistance-Based Temperature Detectors. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 50:2
%A Wagner, Andrej 
%A Bajsić, Ivan 
%A Fajdiga, Matija 
%D 2004
%T Measurement of the Surface-Temperature Field in a Fog Lamp Using Resistance-Based Temperature Detectors
%B 2004
%9 vehicle headlamps; temperature fields; temperature measurements; experimental methods; 
%! Measurement of the Surface-Temperature Field in a Fog Lamp Using Resistance-Based Temperature Detectors
%K vehicle headlamps; temperature fields; temperature measurements; experimental methods; 
%X Modern headlamps are made from low-cost plastic materials that are very convenient for the design of these products. However, plastic materials are not suitable for use at high temperatures. The result can be deformations that result in problems with the photometric properties and with the sealing of the headlamp. In order to predict the deformations the temperature was measured at significant points on the outer and inner parts of the headlamp housing, on the reflector and on the shield of the lamp. The measurements were made with a platinum-resistance temperature detector (RTD). The results of the measurements were then used in a finite element method (FEM) analysis to determine the deformations of the headlamp housing.
%U https://www.sv-jme.eu/sl/article/measurement-of-the-surface-temperature-field-in-a-fog-lamp-using-resistance-based-temperature-detectors/
%0 Journal Article
%R 
%& 72
%P 8
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 50
%N 2
%@ 0039-2480
%8 2017-07-07
%7 2017-07-07
Wagner, Andrej, Ivan  Bajsić, & Matija  Fajdiga.
"Measurement of the Surface-Temperature Field in a Fog Lamp Using Resistance-Based Temperature Detectors." Strojniški vestnik - Journal of Mechanical Engineering [Online], 50.2 (2004): 72-79. Web.  14 Oct. 2024
TY  - JOUR
AU  - Wagner, Andrej 
AU  - Bajsić, Ivan 
AU  - Fajdiga, Matija 
PY  - 2004
TI  - Measurement of the Surface-Temperature Field in a Fog Lamp Using Resistance-Based Temperature Detectors
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - vehicle headlamps; temperature fields; temperature measurements; experimental methods; 
N2  - Modern headlamps are made from low-cost plastic materials that are very convenient for the design of these products. However, plastic materials are not suitable for use at high temperatures. The result can be deformations that result in problems with the photometric properties and with the sealing of the headlamp. In order to predict the deformations the temperature was measured at significant points on the outer and inner parts of the headlamp housing, on the reflector and on the shield of the lamp. The measurements were made with a platinum-resistance temperature detector (RTD). The results of the measurements were then used in a finite element method (FEM) analysis to determine the deformations of the headlamp housing.
UR  - https://www.sv-jme.eu/sl/article/measurement-of-the-surface-temperature-field-in-a-fog-lamp-using-resistance-based-temperature-detectors/
@article{{}{.},
	author = {Wagner, A., Bajsić, I., Fajdiga, M.},
	title = {Measurement of the Surface-Temperature Field in a Fog Lamp Using Resistance-Based Temperature Detectors},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {50},
	number = {2},
	year = {2004},
	doi = {},
	url = {https://www.sv-jme.eu/sl/article/measurement-of-the-surface-temperature-field-in-a-fog-lamp-using-resistance-based-temperature-detectors/}
}
TY  - JOUR
AU  - Wagner, Andrej 
AU  - Bajsić, Ivan 
AU  - Fajdiga, Matija 
PY  - 2017/07/07
TI  - Measurement of the Surface-Temperature Field in a Fog Lamp Using Resistance-Based Temperature Detectors
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 50, No 2 (2004): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - vehicle headlamps, temperature fields, temperature measurements, experimental methods, 
N2  - Modern headlamps are made from low-cost plastic materials that are very convenient for the design of these products. However, plastic materials are not suitable for use at high temperatures. The result can be deformations that result in problems with the photometric properties and with the sealing of the headlamp. In order to predict the deformations the temperature was measured at significant points on the outer and inner parts of the headlamp housing, on the reflector and on the shield of the lamp. The measurements were made with a platinum-resistance temperature detector (RTD). The results of the measurements were then used in a finite element method (FEM) analysis to determine the deformations of the headlamp housing.
UR  - https://www.sv-jme.eu/sl/article/measurement-of-the-surface-temperature-field-in-a-fog-lamp-using-resistance-based-temperature-detectors/
Wagner, Andrej, Bajsić, Ivan, AND Fajdiga, Matija.
"Measurement of the Surface-Temperature Field in a Fog Lamp Using Resistance-Based Temperature Detectors" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 50 Number 2 (07 July 2017)

Avtorji

Inštitucije

  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia
  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia
  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 50(2004)2, 72-79
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

Modern headlamps are made from low-cost plastic materials that are very convenient for the design of these products. However, plastic materials are not suitable for use at high temperatures. The result can be deformations that result in problems with the photometric properties and with the sealing of the headlamp. In order to predict the deformations the temperature was measured at significant points on the outer and inner parts of the headlamp housing, on the reflector and on the shield of the lamp. The measurements were made with a platinum-resistance temperature detector (RTD). The results of the measurements were then used in a finite element method (FEM) analysis to determine the deformations of the headlamp housing.

vehicle headlamps; temperature fields; temperature measurements; experimental methods;