Mechanism Research and Discussion of the Quality of Precision Machining of a Fifth-order Variable-diameter Pipe Using Abrasive Flow

396 Ogledov
209 Prenosov
Izvoz citacije: ABNT
LI, Junye ;WANG, Lixiong ;ZHANG, Hengfu ;HU, Jinglei ;ZHANG, Xinming ;ZHAO, Weihong .
Mechanism Research and Discussion of the Quality of Precision Machining of a Fifth-order Variable-diameter Pipe Using Abrasive Flow. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 66, n.6, p. 358-374, june 2020. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/mechanism-research-and-quality-discussion-on-precision-machining-of-fifth-order-variable-diameter-pipe-by-abrasive-flow/>. Date accessed: 24 sep. 2020. 
doi:http://dx.doi.org/10.5545/sv-jme.2020.6554.
Li, J., Wang, L., Zhang, H., Hu, J., Zhang, X., & Zhao, W.
(2020).
Mechanism Research and Discussion of the Quality of Precision Machining of a Fifth-order Variable-diameter Pipe Using Abrasive Flow.
Strojniški vestnik - Journal of Mechanical Engineering, 66(6), 358-374.
doi:http://dx.doi.org/10.5545/sv-jme.2020.6554
@article{sv-jmesv-jme.2020.6554,
	author = {Junye  Li and Lixiong  Wang and Hengfu  Zhang and Jinglei  Hu and Xinming  Zhang and Weihong  Zhao},
	title = {Mechanism Research and Discussion of the Quality of Precision Machining of a Fifth-order Variable-diameter Pipe Using Abrasive Flow},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {66},
	number = {6},
	year = {2020},
	keywords = {abrasive flow precision machining; numerical analysis; variable-diameter pipe; quality control},
	abstract = {The solid-liquid two-phase abrasive flow precision machining technology is widely used in aerospace, precision machinery, the automotive industry and other fields, and is an advanced manufacturing technology that effectively improves the inner surface quality of workpieces. In this paper, the fifth-order variable-diameter pipe parts are researched. By discussing the collision between the abrasive particles and the wall surface, it is revealed that the material removal of the workpiece is caused by plastic deformation, and the mechanism of precision machining of the abrasive flow is clarified. Through numerical analysis and experimental research, it is found that the incident angle can affect the precision machining quality of the abrasive flow. When the inlet velocity of the abrasive flow is 45 m/s and the incident angle is 15°, the fifth-order variable-diameter pipe can obtain the best surface quality. Abrasive flow machining improves the surface quality of small holes better than that of large holes. To obtain uniform surface quality, it is necessary to use two-way machining to perform abrasive flow machining. The surface texture of the fifth-order variable-diameter pipe workpiece after precision machining by abrasive flow becomes clear and smooth, and the surface quality is significantly improved. The research results can provide theoretical guidance and technical support for the popularization and application of solid-liquid two-phase abrasive flow precision machining technology, with significant academic value and application value.},
	issn = {0039-2480},	pages = {358-374},	doi = {10.5545/sv-jme.2020.6554},
	url = {https://www.sv-jme.eu/sl/article/mechanism-research-and-quality-discussion-on-precision-machining-of-fifth-order-variable-diameter-pipe-by-abrasive-flow/}
}
Li, J.,Wang, L.,Zhang, H.,Hu, J.,Zhang, X.,Zhao, W.
2020 June 66. Mechanism Research and Discussion of the Quality of Precision Machining of a Fifth-order Variable-diameter Pipe Using Abrasive Flow. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 66:6
%A Li, Junye 
%A Wang, Lixiong 
%A Zhang, Hengfu 
%A Hu, Jinglei 
%A Zhang, Xinming 
%A Zhao, Weihong 
%D 2020
%T Mechanism Research and Discussion of the Quality of Precision Machining of a Fifth-order Variable-diameter Pipe Using Abrasive Flow
%B 2020
%9 abrasive flow precision machining; numerical analysis; variable-diameter pipe; quality control
%! Mechanism Research and Discussion of the Quality of Precision Machining of a Fifth-order Variable-diameter Pipe Using Abrasive Flow
%K abrasive flow precision machining; numerical analysis; variable-diameter pipe; quality control
%X The solid-liquid two-phase abrasive flow precision machining technology is widely used in aerospace, precision machinery, the automotive industry and other fields, and is an advanced manufacturing technology that effectively improves the inner surface quality of workpieces. In this paper, the fifth-order variable-diameter pipe parts are researched. By discussing the collision between the abrasive particles and the wall surface, it is revealed that the material removal of the workpiece is caused by plastic deformation, and the mechanism of precision machining of the abrasive flow is clarified. Through numerical analysis and experimental research, it is found that the incident angle can affect the precision machining quality of the abrasive flow. When the inlet velocity of the abrasive flow is 45 m/s and the incident angle is 15°, the fifth-order variable-diameter pipe can obtain the best surface quality. Abrasive flow machining improves the surface quality of small holes better than that of large holes. To obtain uniform surface quality, it is necessary to use two-way machining to perform abrasive flow machining. The surface texture of the fifth-order variable-diameter pipe workpiece after precision machining by abrasive flow becomes clear and smooth, and the surface quality is significantly improved. The research results can provide theoretical guidance and technical support for the popularization and application of solid-liquid two-phase abrasive flow precision machining technology, with significant academic value and application value.
%U https://www.sv-jme.eu/sl/article/mechanism-research-and-quality-discussion-on-precision-machining-of-fifth-order-variable-diameter-pipe-by-abrasive-flow/
%0 Journal Article
%R 10.5545/sv-jme.2020.6554
%& 358
%P 17
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 66
%N 6
%@ 0039-2480
%8 2020-06-17
%7 2020-06-17
Li, Junye, Lixiong  Wang, Hengfu  Zhang, Jinglei  Hu, Xinming  Zhang, & Weihong  Zhao.
"Mechanism Research and Discussion of the Quality of Precision Machining of a Fifth-order Variable-diameter Pipe Using Abrasive Flow." Strojniški vestnik - Journal of Mechanical Engineering [Online], 66.6 (2020): 358-374. Web.  24 Sep. 2020
TY  - JOUR
AU  - Li, Junye 
AU  - Wang, Lixiong 
AU  - Zhang, Hengfu 
AU  - Hu, Jinglei 
AU  - Zhang, Xinming 
AU  - Zhao, Weihong 
PY  - 2020
TI  - Mechanism Research and Discussion of the Quality of Precision Machining of a Fifth-order Variable-diameter Pipe Using Abrasive Flow
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2020.6554
KW  - abrasive flow precision machining; numerical analysis; variable-diameter pipe; quality control
N2  - The solid-liquid two-phase abrasive flow precision machining technology is widely used in aerospace, precision machinery, the automotive industry and other fields, and is an advanced manufacturing technology that effectively improves the inner surface quality of workpieces. In this paper, the fifth-order variable-diameter pipe parts are researched. By discussing the collision between the abrasive particles and the wall surface, it is revealed that the material removal of the workpiece is caused by plastic deformation, and the mechanism of precision machining of the abrasive flow is clarified. Through numerical analysis and experimental research, it is found that the incident angle can affect the precision machining quality of the abrasive flow. When the inlet velocity of the abrasive flow is 45 m/s and the incident angle is 15°, the fifth-order variable-diameter pipe can obtain the best surface quality. Abrasive flow machining improves the surface quality of small holes better than that of large holes. To obtain uniform surface quality, it is necessary to use two-way machining to perform abrasive flow machining. The surface texture of the fifth-order variable-diameter pipe workpiece after precision machining by abrasive flow becomes clear and smooth, and the surface quality is significantly improved. The research results can provide theoretical guidance and technical support for the popularization and application of solid-liquid two-phase abrasive flow precision machining technology, with significant academic value and application value.
UR  - https://www.sv-jme.eu/sl/article/mechanism-research-and-quality-discussion-on-precision-machining-of-fifth-order-variable-diameter-pipe-by-abrasive-flow/
@article{{sv-jme}{sv-jme.2020.6554},
	author = {Li, J., Wang, L., Zhang, H., Hu, J., Zhang, X., Zhao, W.},
	title = {Mechanism Research and Discussion of the Quality of Precision Machining of a Fifth-order Variable-diameter Pipe Using Abrasive Flow},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {66},
	number = {6},
	year = {2020},
	doi = {10.5545/sv-jme.2020.6554},
	url = {https://www.sv-jme.eu/sl/article/mechanism-research-and-quality-discussion-on-precision-machining-of-fifth-order-variable-diameter-pipe-by-abrasive-flow/}
}
TY  - JOUR
AU  - Li, Junye 
AU  - Wang, Lixiong 
AU  - Zhang, Hengfu 
AU  - Hu, Jinglei 
AU  - Zhang, Xinming 
AU  - Zhao, Weihong 
PY  - 2020/06/17
TI  - Mechanism Research and Discussion of the Quality of Precision Machining of a Fifth-order Variable-diameter Pipe Using Abrasive Flow
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 66, No 6 (2020): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2020.6554
KW  - abrasive flow precision machining, numerical analysis, variable-diameter pipe, quality control
N2  - The solid-liquid two-phase abrasive flow precision machining technology is widely used in aerospace, precision machinery, the automotive industry and other fields, and is an advanced manufacturing technology that effectively improves the inner surface quality of workpieces. In this paper, the fifth-order variable-diameter pipe parts are researched. By discussing the collision between the abrasive particles and the wall surface, it is revealed that the material removal of the workpiece is caused by plastic deformation, and the mechanism of precision machining of the abrasive flow is clarified. Through numerical analysis and experimental research, it is found that the incident angle can affect the precision machining quality of the abrasive flow. When the inlet velocity of the abrasive flow is 45 m/s and the incident angle is 15°, the fifth-order variable-diameter pipe can obtain the best surface quality. Abrasive flow machining improves the surface quality of small holes better than that of large holes. To obtain uniform surface quality, it is necessary to use two-way machining to perform abrasive flow machining. The surface texture of the fifth-order variable-diameter pipe workpiece after precision machining by abrasive flow becomes clear and smooth, and the surface quality is significantly improved. The research results can provide theoretical guidance and technical support for the popularization and application of solid-liquid two-phase abrasive flow precision machining technology, with significant academic value and application value.
UR  - https://www.sv-jme.eu/sl/article/mechanism-research-and-quality-discussion-on-precision-machining-of-fifth-order-variable-diameter-pipe-by-abrasive-flow/
Li, Junye, Wang, Lixiong, Zhang, Hengfu, Hu, Jinglei, Zhang, Xinming, AND Zhao, Weihong.
"Mechanism Research and Discussion of the Quality of Precision Machining of a Fifth-order Variable-diameter Pipe Using Abrasive Flow" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 66 Number 6 (17 June 2020)

Avtorji

Inštitucije

  • Ministry of Education, Key Laboratory for Cross-Scale Micro- and Nano-Manufacturing, Changchun University of Science and Technology, China 1

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 66(2020)6, 358-374

https://doi.org/10.5545/sv-jme.2020.6554

The solid-liquid two-phase abrasive flow precision machining technology is widely used in aerospace, precision machinery, the automotive industry and other fields, and is an advanced manufacturing technology that effectively improves the inner surface quality of workpieces. In this paper, the fifth-order variable-diameter pipe parts are researched. By discussing the collision between the abrasive particles and the wall surface, it is revealed that the material removal of the workpiece is caused by plastic deformation, and the mechanism of precision machining of the abrasive flow is clarified. Through numerical analysis and experimental research, it is found that the incident angle can affect the precision machining quality of the abrasive flow. When the inlet velocity of the abrasive flow is 45 m/s and the incident angle is 15°, the fifth-order variable-diameter pipe can obtain the best surface quality. Abrasive flow machining improves the surface quality of small holes better than that of large holes. To obtain uniform surface quality, it is necessary to use two-way machining to perform abrasive flow machining. The surface texture of the fifth-order variable-diameter pipe workpiece after precision machining by abrasive flow becomes clear and smooth, and the surface quality is significantly improved. The research results can provide theoretical guidance and technical support for the popularization and application of solid-liquid two-phase abrasive flow precision machining technology, with significant academic value and application value.

abrasive flow precision machining; numerical analysis; variable-diameter pipe; quality control