Monitoring Cutting-Tool Wear Using Signals from the Control System

718 Ogledov
526 Prenosov
Izvoz citacije: ABNT
MULC, Tihomir ;UDILJAK, Toma ;ČUŠ, Franci ;MILFELNER, Matjaž .
Monitoring Cutting-Tool Wear Using Signals from the Control System. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 50, n.12, p. 568-579, july 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/monitoring-cutting-tool-wear-using-signals-from-the-control-system/>. Date accessed: 09 aug. 2020. 
doi:http://dx.doi.org/.
Mulc, T., Udiljak, T., Čuš, F., & Milfelner, M.
(2004).
Monitoring Cutting-Tool Wear Using Signals from the Control System.
Strojniški vestnik - Journal of Mechanical Engineering, 50(12), 568-579.
doi:http://dx.doi.org/
@article{.,
	author = {Tihomir  Mulc and Toma  Udiljak and Franci  Čuš and Matjaž  Milfelner},
	title = {Monitoring Cutting-Tool Wear Using Signals from the Control System},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {50},
	number = {12},
	year = {2004},
	keywords = {condition monitoring; control systems; sensitivity analysis; turning; tool wear; },
	abstract = {The safety and reliability of operation of industrial manufacturing processes is a very important prerequisite for economic production. Process disturbances such as collision, overload, breakdown and tool wear are not yet fully understood, and cause production-system failures. In order to prevent the effects of excess wear or eventual tool breakdown, modern technological systems pay particular attention to predicting the condition of tool. Numerous theories of monitoring have tried to classify and explain tool wear, but none have given completely satisfactory results as yet, while at the same time ensuring flexible, simple and costeffective process control. The open structure of modern digital control opens up new possibilities: in many cases the combination of digital plant signals and the internal data of the machine control system, along with advanced methods of signal analysis, can replace external control systems. The integration of a processcontrol software module into the machine control system allows fast reactions, should there be any process disturbances, without any additional hardware expansion. This paper studies the sensitivity of signals contained in the control system to the cutting-tool wear processes in face turning.},
	issn = {0039-2480},	pages = {568-579},	doi = {},
	url = {https://www.sv-jme.eu/sl/article/monitoring-cutting-tool-wear-using-signals-from-the-control-system/}
}
Mulc, T.,Udiljak, T.,Čuš, F.,Milfelner, M.
2004 July 50. Monitoring Cutting-Tool Wear Using Signals from the Control System. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 50:12
%A Mulc, Tihomir 
%A Udiljak, Toma 
%A Čuš, Franci 
%A Milfelner, Matjaž 
%D 2004
%T Monitoring Cutting-Tool Wear Using Signals from the Control System
%B 2004
%9 condition monitoring; control systems; sensitivity analysis; turning; tool wear; 
%! Monitoring Cutting-Tool Wear Using Signals from the Control System
%K condition monitoring; control systems; sensitivity analysis; turning; tool wear; 
%X The safety and reliability of operation of industrial manufacturing processes is a very important prerequisite for economic production. Process disturbances such as collision, overload, breakdown and tool wear are not yet fully understood, and cause production-system failures. In order to prevent the effects of excess wear or eventual tool breakdown, modern technological systems pay particular attention to predicting the condition of tool. Numerous theories of monitoring have tried to classify and explain tool wear, but none have given completely satisfactory results as yet, while at the same time ensuring flexible, simple and costeffective process control. The open structure of modern digital control opens up new possibilities: in many cases the combination of digital plant signals and the internal data of the machine control system, along with advanced methods of signal analysis, can replace external control systems. The integration of a processcontrol software module into the machine control system allows fast reactions, should there be any process disturbances, without any additional hardware expansion. This paper studies the sensitivity of signals contained in the control system to the cutting-tool wear processes in face turning.
%U https://www.sv-jme.eu/sl/article/monitoring-cutting-tool-wear-using-signals-from-the-control-system/
%0 Journal Article
%R 
%& 568
%P 12
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 50
%N 12
%@ 0039-2480
%8 2017-07-07
%7 2017-07-07
Mulc, Tihomir, Toma  Udiljak, Franci  Čuš, & Matjaž  Milfelner.
"Monitoring Cutting-Tool Wear Using Signals from the Control System." Strojniški vestnik - Journal of Mechanical Engineering [Online], 50.12 (2004): 568-579. Web.  09 Aug. 2020
TY  - JOUR
AU  - Mulc, Tihomir 
AU  - Udiljak, Toma 
AU  - Čuš, Franci 
AU  - Milfelner, Matjaž 
PY  - 2004
TI  - Monitoring Cutting-Tool Wear Using Signals from the Control System
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - condition monitoring; control systems; sensitivity analysis; turning; tool wear; 
N2  - The safety and reliability of operation of industrial manufacturing processes is a very important prerequisite for economic production. Process disturbances such as collision, overload, breakdown and tool wear are not yet fully understood, and cause production-system failures. In order to prevent the effects of excess wear or eventual tool breakdown, modern technological systems pay particular attention to predicting the condition of tool. Numerous theories of monitoring have tried to classify and explain tool wear, but none have given completely satisfactory results as yet, while at the same time ensuring flexible, simple and costeffective process control. The open structure of modern digital control opens up new possibilities: in many cases the combination of digital plant signals and the internal data of the machine control system, along with advanced methods of signal analysis, can replace external control systems. The integration of a processcontrol software module into the machine control system allows fast reactions, should there be any process disturbances, without any additional hardware expansion. This paper studies the sensitivity of signals contained in the control system to the cutting-tool wear processes in face turning.
UR  - https://www.sv-jme.eu/sl/article/monitoring-cutting-tool-wear-using-signals-from-the-control-system/
@article{{}{.},
	author = {Mulc, T., Udiljak, T., Čuš, F., Milfelner, M.},
	title = {Monitoring Cutting-Tool Wear Using Signals from the Control System},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {50},
	number = {12},
	year = {2004},
	doi = {},
	url = {https://www.sv-jme.eu/sl/article/monitoring-cutting-tool-wear-using-signals-from-the-control-system/}
}
TY  - JOUR
AU  - Mulc, Tihomir 
AU  - Udiljak, Toma 
AU  - Čuš, Franci 
AU  - Milfelner, Matjaž 
PY  - 2017/07/07
TI  - Monitoring Cutting-Tool Wear Using Signals from the Control System
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 50, No 12 (2004): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - condition monitoring, control systems, sensitivity analysis, turning, tool wear, 
N2  - The safety and reliability of operation of industrial manufacturing processes is a very important prerequisite for economic production. Process disturbances such as collision, overload, breakdown and tool wear are not yet fully understood, and cause production-system failures. In order to prevent the effects of excess wear or eventual tool breakdown, modern technological systems pay particular attention to predicting the condition of tool. Numerous theories of monitoring have tried to classify and explain tool wear, but none have given completely satisfactory results as yet, while at the same time ensuring flexible, simple and costeffective process control. The open structure of modern digital control opens up new possibilities: in many cases the combination of digital plant signals and the internal data of the machine control system, along with advanced methods of signal analysis, can replace external control systems. The integration of a processcontrol software module into the machine control system allows fast reactions, should there be any process disturbances, without any additional hardware expansion. This paper studies the sensitivity of signals contained in the control system to the cutting-tool wear processes in face turning.
UR  - https://www.sv-jme.eu/sl/article/monitoring-cutting-tool-wear-using-signals-from-the-control-system/
Mulc, Tihomir, Udiljak, Toma, Čuš, Franci, AND Milfelner, Matjaž.
"Monitoring Cutting-Tool Wear Using Signals from the Control System" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 50 Number 12 (07 July 2017)

Avtorji

Inštitucije

  • University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Croatia
  • University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Croatia
  • University of Maribor, Faculty of Mechanical Engineering, Slovenia
  • University of Maribor, Faculty of Mechanical Engineering, Slovenia

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 50(2004)12, 568-579

The safety and reliability of operation of industrial manufacturing processes is a very important prerequisite for economic production. Process disturbances such as collision, overload, breakdown and tool wear are not yet fully understood, and cause production-system failures. In order to prevent the effects of excess wear or eventual tool breakdown, modern technological systems pay particular attention to predicting the condition of tool. Numerous theories of monitoring have tried to classify and explain tool wear, but none have given completely satisfactory results as yet, while at the same time ensuring flexible, simple and costeffective process control. The open structure of modern digital control opens up new possibilities: in many cases the combination of digital plant signals and the internal data of the machine control system, along with advanced methods of signal analysis, can replace external control systems. The integration of a processcontrol software module into the machine control system allows fast reactions, should there be any process disturbances, without any additional hardware expansion. This paper studies the sensitivity of signals contained in the control system to the cutting-tool wear processes in face turning.

condition monitoring; control systems; sensitivity analysis; turning; tool wear;