LIU, Yonghong ;CAI, Baoping ;ABULIMITI, Aibaibu ;JI, Renjie ;ZHANG, Yanzhen ;DONG, Xin ;ZHOU, Yuming . Optimal Design Based on Dynamic Characteristics and Experimental Implementation of Submersible Electromagnetic Actuators. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 59, n.7-8, p. 473-482, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/optimal-design-based-on-dynamic-characteristics-and-experimental-implementation-of-submersible-electromagnetic-actuators/>. Date accessed: 20 apr. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2012.863.
Liu, Y., Cai, B., Abulimiti, A., Ji, R., Zhang, Y., Dong, X., & Zhou, Y. (2013). Optimal Design Based on Dynamic Characteristics and Experimental Implementation of Submersible Electromagnetic Actuators. Strojniški vestnik - Journal of Mechanical Engineering, 59(7-8), 473-482. doi:http://dx.doi.org/10.5545/sv-jme.2012.863
@article{sv-jmesv-jme.2012.863,
author = {Yonghong Liu and Baoping Cai and Aibaibu Abulimiti and Renjie Ji and Yanzhen Zhang and Xin Dong and Yuming Zhou},
title = {Optimal Design Based on Dynamic Characteristics and Experimental Implementation of Submersible Electromagnetic Actuators},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {59},
number = {7-8},
year = {2013},
keywords = {submersible electromagnetic actuator; optimal design; magnetic equivalent circuit; dynamic characteristics},
abstract = {An optimization procedure based on the dynamic characteristics of a submersible electromagnetic actuator constrained in a specific volume has been developed. In order to achieve the minimum response time and low vibration when the actuator is opened, five radial dimensions are optimized when the main limiting quantity is the maximum allowed temperature. Three models, including a thermal model, an electromagnetic model, and a mechanical model are constructed, and optimization calculation is performed by using Matlab/Simulink software. According to the optimization results, an actuator is manufactured and dynamic experiments are performed. The results show substantial agreement between experimental response times and simulated response times. In order to investigate the vibration when the actuator is opened and closed, vibration experiments of the actuator are also performed. The results show that the measured vertical and horizontal accelerations are near the calculated acceleration of the plunger. Both of the experiments show that the optimization procedure is sufficiently accurate, and the optimal submersible electromagnetic actuator is sufficiently secure to be used in subsea BOP stacks.},
issn = {0039-2480}, pages = {473-482}, doi = {10.5545/sv-jme.2012.863},
url = {https://www.sv-jme.eu/sl/article/optimal-design-based-on-dynamic-characteristics-and-experimental-implementation-of-submersible-electromagnetic-actuators/}
}
Liu, Y.,Cai, B.,Abulimiti, A.,Ji, R.,Zhang, Y.,Dong, X.,Zhou, Y. 2013 June 59. Optimal Design Based on Dynamic Characteristics and Experimental Implementation of Submersible Electromagnetic Actuators. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 59:7-8
%A Liu, Yonghong %A Cai, Baoping %A Abulimiti, Aibaibu %A Ji, Renjie %A Zhang, Yanzhen %A Dong, Xin %A Zhou, Yuming %D 2013 %T Optimal Design Based on Dynamic Characteristics and Experimental Implementation of Submersible Electromagnetic Actuators %B 2013 %9 submersible electromagnetic actuator; optimal design; magnetic equivalent circuit; dynamic characteristics %! Optimal Design Based on Dynamic Characteristics and Experimental Implementation of Submersible Electromagnetic Actuators %K submersible electromagnetic actuator; optimal design; magnetic equivalent circuit; dynamic characteristics %X An optimization procedure based on the dynamic characteristics of a submersible electromagnetic actuator constrained in a specific volume has been developed. In order to achieve the minimum response time and low vibration when the actuator is opened, five radial dimensions are optimized when the main limiting quantity is the maximum allowed temperature. Three models, including a thermal model, an electromagnetic model, and a mechanical model are constructed, and optimization calculation is performed by using Matlab/Simulink software. According to the optimization results, an actuator is manufactured and dynamic experiments are performed. The results show substantial agreement between experimental response times and simulated response times. In order to investigate the vibration when the actuator is opened and closed, vibration experiments of the actuator are also performed. The results show that the measured vertical and horizontal accelerations are near the calculated acceleration of the plunger. Both of the experiments show that the optimization procedure is sufficiently accurate, and the optimal submersible electromagnetic actuator is sufficiently secure to be used in subsea BOP stacks. %U https://www.sv-jme.eu/sl/article/optimal-design-based-on-dynamic-characteristics-and-experimental-implementation-of-submersible-electromagnetic-actuators/ %0 Journal Article %R 10.5545/sv-jme.2012.863 %& 473 %P 10 %J Strojniški vestnik - Journal of Mechanical Engineering %V 59 %N 7-8 %@ 0039-2480 %8 2018-06-28 %7 2018-06-28
Liu, Yonghong, Baoping Cai, Aibaibu Abulimiti, Renjie Ji, Yanzhen Zhang, Xin Dong, & Yuming Zhou. "Optimal Design Based on Dynamic Characteristics and Experimental Implementation of Submersible Electromagnetic Actuators." Strojniški vestnik - Journal of Mechanical Engineering [Online], 59.7-8 (2013): 473-482. Web. 20 Apr. 2024
TY - JOUR AU - Liu, Yonghong AU - Cai, Baoping AU - Abulimiti, Aibaibu AU - Ji, Renjie AU - Zhang, Yanzhen AU - Dong, Xin AU - Zhou, Yuming PY - 2013 TI - Optimal Design Based on Dynamic Characteristics and Experimental Implementation of Submersible Electromagnetic Actuators JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2012.863 KW - submersible electromagnetic actuator; optimal design; magnetic equivalent circuit; dynamic characteristics N2 - An optimization procedure based on the dynamic characteristics of a submersible electromagnetic actuator constrained in a specific volume has been developed. In order to achieve the minimum response time and low vibration when the actuator is opened, five radial dimensions are optimized when the main limiting quantity is the maximum allowed temperature. Three models, including a thermal model, an electromagnetic model, and a mechanical model are constructed, and optimization calculation is performed by using Matlab/Simulink software. According to the optimization results, an actuator is manufactured and dynamic experiments are performed. The results show substantial agreement between experimental response times and simulated response times. In order to investigate the vibration when the actuator is opened and closed, vibration experiments of the actuator are also performed. The results show that the measured vertical and horizontal accelerations are near the calculated acceleration of the plunger. Both of the experiments show that the optimization procedure is sufficiently accurate, and the optimal submersible electromagnetic actuator is sufficiently secure to be used in subsea BOP stacks. UR - https://www.sv-jme.eu/sl/article/optimal-design-based-on-dynamic-characteristics-and-experimental-implementation-of-submersible-electromagnetic-actuators/
@article{{sv-jme}{sv-jme.2012.863},
author = {Liu, Y., Cai, B., Abulimiti, A., Ji, R., Zhang, Y., Dong, X., Zhou, Y.},
title = {Optimal Design Based on Dynamic Characteristics and Experimental Implementation of Submersible Electromagnetic Actuators},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {59},
number = {7-8},
year = {2013},
doi = {10.5545/sv-jme.2012.863},
url = {https://www.sv-jme.eu/sl/article/optimal-design-based-on-dynamic-characteristics-and-experimental-implementation-of-submersible-electromagnetic-actuators/}
}
TY - JOUR AU - Liu, Yonghong AU - Cai, Baoping AU - Abulimiti, Aibaibu AU - Ji, Renjie AU - Zhang, Yanzhen AU - Dong, Xin AU - Zhou, Yuming PY - 2018/06/28 TI - Optimal Design Based on Dynamic Characteristics and Experimental Implementation of Submersible Electromagnetic Actuators JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 59, No 7-8 (2013): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2012.863 KW - submersible electromagnetic actuator, optimal design, magnetic equivalent circuit, dynamic characteristics N2 - An optimization procedure based on the dynamic characteristics of a submersible electromagnetic actuator constrained in a specific volume has been developed. In order to achieve the minimum response time and low vibration when the actuator is opened, five radial dimensions are optimized when the main limiting quantity is the maximum allowed temperature. Three models, including a thermal model, an electromagnetic model, and a mechanical model are constructed, and optimization calculation is performed by using Matlab/Simulink software. According to the optimization results, an actuator is manufactured and dynamic experiments are performed. The results show substantial agreement between experimental response times and simulated response times. In order to investigate the vibration when the actuator is opened and closed, vibration experiments of the actuator are also performed. The results show that the measured vertical and horizontal accelerations are near the calculated acceleration of the plunger. Both of the experiments show that the optimization procedure is sufficiently accurate, and the optimal submersible electromagnetic actuator is sufficiently secure to be used in subsea BOP stacks. UR - https://www.sv-jme.eu/sl/article/optimal-design-based-on-dynamic-characteristics-and-experimental-implementation-of-submersible-electromagnetic-actuators/
Liu, Yonghong, Cai, Baoping, Abulimiti, Aibaibu, Ji, Renjie, Zhang, Yanzhen, Dong, Xin, AND Zhou, Yuming. "Optimal Design Based on Dynamic Characteristics and Experimental Implementation of Submersible Electromagnetic Actuators" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 59 Number 7-8 (28 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 59(2013)7-8, 473-482
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
An optimization procedure based on the dynamic characteristics of a submersible electromagnetic actuator constrained in a specific volume has been developed. In order to achieve the minimum response time and low vibration when the actuator is opened, five radial dimensions are optimized when the main limiting quantity is the maximum allowed temperature. Three models, including a thermal model, an electromagnetic model, and a mechanical model are constructed, and optimization calculation is performed by using Matlab/Simulink software. According to the optimization results, an actuator is manufactured and dynamic experiments are performed. The results show substantial agreement between experimental response times and simulated response times. In order to investigate the vibration when the actuator is opened and closed, vibration experiments of the actuator are also performed. The results show that the measured vertical and horizontal accelerations are near the calculated acceleration of the plunger. Both of the experiments show that the optimization procedure is sufficiently accurate, and the optimal submersible electromagnetic actuator is sufficiently secure to be used in subsea BOP stacks.