PEREC, Andrzej ;KAWECKA, Elzbieta ;RADOMSKA-ZALAS, Aleksandra ;PUDE, Frank . Optimization of Abrasive Waterjet Cutting by Using the CODAS Method with Regard to Interdependent Processing Parameters. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 69, n.9-10, p. 367-375, august 2023. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/optimization-of-abrasive-waterjet-cutting-by-using-the-codas-method-with-regard-to-interdependent-processing-parameters/>. Date accessed: 11 dec. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2023.647.
Perec, A., Kawecka, E., Radomska-Zalas, A., & Pude, F. (2023). Optimization of Abrasive Waterjet Cutting by Using the CODAS Method with Regard to Interdependent Processing Parameters. Strojniški vestnik - Journal of Mechanical Engineering, 69(9-10), 367-375. doi:http://dx.doi.org/10.5545/sv-jme.2023.647
@article{sv-jmesv-jme.2023.647, author = {Andrzej Perec and Elzbieta Kawecka and Aleksandra Radomska-Zalas and Frank Pude}, title = {Optimization of Abrasive Waterjet Cutting by Using the CODAS Method with Regard to Interdependent Processing Parameters}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {69}, number = {9-10}, year = {2023}, keywords = {abrasive waterjet cutting; process optimization; CODAS method; maximum cutting depth; minimum surface roughness; }, abstract = {The paper shows performance optimization effects of steel machining by abrasive water jet (AWJ). An innovative combinative distance-based assessment method (CODAS) is implemented for the optimization of cutting parameters like pump pressure, feed rate, and abrasive flow rate over cutting depth, and cut kerf surface roughness. The CODAS algorithm is among those based on measuring the distance between a scenario (in this case processing parameters in terms of performance and quality indicators) - and a certain benchmark. A benchmark is a specific hypothetical set of processing parameters devised or determined from available data. To determine the best set of process control parameters, a CODAS approach was performed with some weighting determinations. To set the initial parameters of the weights, it was proposed to calculate based on entropy weight method (EWM), that measures output value dispersion in cutting process. This technique simplifies multiple compound responses by preserving a single response.}, issn = {0039-2480}, pages = {367-375}, doi = {10.5545/sv-jme.2023.647}, url = {https://www.sv-jme.eu/sl/article/optimization-of-abrasive-waterjet-cutting-by-using-the-codas-method-with-regard-to-interdependent-processing-parameters/} }
Perec, A.,Kawecka, E.,Radomska-Zalas, A.,Pude, F. 2023 August 69. Optimization of Abrasive Waterjet Cutting by Using the CODAS Method with Regard to Interdependent Processing Parameters. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 69:9-10
%A Perec, Andrzej %A Kawecka, Elzbieta %A Radomska-Zalas, Aleksandra %A Pude, Frank %D 2023 %T Optimization of Abrasive Waterjet Cutting by Using the CODAS Method with Regard to Interdependent Processing Parameters %B 2023 %9 abrasive waterjet cutting; process optimization; CODAS method; maximum cutting depth; minimum surface roughness; %! Optimization of Abrasive Waterjet Cutting by Using the CODAS Method with Regard to Interdependent Processing Parameters %K abrasive waterjet cutting; process optimization; CODAS method; maximum cutting depth; minimum surface roughness; %X The paper shows performance optimization effects of steel machining by abrasive water jet (AWJ). An innovative combinative distance-based assessment method (CODAS) is implemented for the optimization of cutting parameters like pump pressure, feed rate, and abrasive flow rate over cutting depth, and cut kerf surface roughness. The CODAS algorithm is among those based on measuring the distance between a scenario (in this case processing parameters in terms of performance and quality indicators) - and a certain benchmark. A benchmark is a specific hypothetical set of processing parameters devised or determined from available data. To determine the best set of process control parameters, a CODAS approach was performed with some weighting determinations. To set the initial parameters of the weights, it was proposed to calculate based on entropy weight method (EWM), that measures output value dispersion in cutting process. This technique simplifies multiple compound responses by preserving a single response. %U https://www.sv-jme.eu/sl/article/optimization-of-abrasive-waterjet-cutting-by-using-the-codas-method-with-regard-to-interdependent-processing-parameters/ %0 Journal Article %R 10.5545/sv-jme.2023.647 %& 367 %P 9 %J Strojniški vestnik - Journal of Mechanical Engineering %V 69 %N 9-10 %@ 0039-2480 %8 2023-08-16 %7 2023-08-16
Perec, Andrzej , Elzbieta Kawecka, Aleksandra Radomska-Zalas, & Frank Pude. "Optimization of Abrasive Waterjet Cutting by Using the CODAS Method with Regard to Interdependent Processing Parameters." Strojniški vestnik - Journal of Mechanical Engineering [Online], 69.9-10 (2023): 367-375. Web. 11 Dec. 2024
TY - JOUR AU - Perec, Andrzej AU - Kawecka, Elzbieta AU - Radomska-Zalas, Aleksandra AU - Pude, Frank PY - 2023 TI - Optimization of Abrasive Waterjet Cutting by Using the CODAS Method with Regard to Interdependent Processing Parameters JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2023.647 KW - abrasive waterjet cutting; process optimization; CODAS method; maximum cutting depth; minimum surface roughness; N2 - The paper shows performance optimization effects of steel machining by abrasive water jet (AWJ). An innovative combinative distance-based assessment method (CODAS) is implemented for the optimization of cutting parameters like pump pressure, feed rate, and abrasive flow rate over cutting depth, and cut kerf surface roughness. The CODAS algorithm is among those based on measuring the distance between a scenario (in this case processing parameters in terms of performance and quality indicators) - and a certain benchmark. A benchmark is a specific hypothetical set of processing parameters devised or determined from available data. To determine the best set of process control parameters, a CODAS approach was performed with some weighting determinations. To set the initial parameters of the weights, it was proposed to calculate based on entropy weight method (EWM), that measures output value dispersion in cutting process. This technique simplifies multiple compound responses by preserving a single response. UR - https://www.sv-jme.eu/sl/article/optimization-of-abrasive-waterjet-cutting-by-using-the-codas-method-with-regard-to-interdependent-processing-parameters/
@article{{sv-jme}{sv-jme.2023.647}, author = {Perec, A., Kawecka, E., Radomska-Zalas, A., Pude, F.}, title = {Optimization of Abrasive Waterjet Cutting by Using the CODAS Method with Regard to Interdependent Processing Parameters}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {69}, number = {9-10}, year = {2023}, doi = {10.5545/sv-jme.2023.647}, url = {https://www.sv-jme.eu/sl/article/optimization-of-abrasive-waterjet-cutting-by-using-the-codas-method-with-regard-to-interdependent-processing-parameters/} }
TY - JOUR AU - Perec, Andrzej AU - Kawecka, Elzbieta AU - Radomska-Zalas, Aleksandra AU - Pude, Frank PY - 2023/08/16 TI - Optimization of Abrasive Waterjet Cutting by Using the CODAS Method with Regard to Interdependent Processing Parameters JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 69, No 9-10 (2023): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2023.647 KW - abrasive waterjet cutting, process optimization, CODAS method, maximum cutting depth, minimum surface roughness, N2 - The paper shows performance optimization effects of steel machining by abrasive water jet (AWJ). An innovative combinative distance-based assessment method (CODAS) is implemented for the optimization of cutting parameters like pump pressure, feed rate, and abrasive flow rate over cutting depth, and cut kerf surface roughness. The CODAS algorithm is among those based on measuring the distance between a scenario (in this case processing parameters in terms of performance and quality indicators) - and a certain benchmark. A benchmark is a specific hypothetical set of processing parameters devised or determined from available data. To determine the best set of process control parameters, a CODAS approach was performed with some weighting determinations. To set the initial parameters of the weights, it was proposed to calculate based on entropy weight method (EWM), that measures output value dispersion in cutting process. This technique simplifies multiple compound responses by preserving a single response. UR - https://www.sv-jme.eu/sl/article/optimization-of-abrasive-waterjet-cutting-by-using-the-codas-method-with-regard-to-interdependent-processing-parameters/
Perec, Andrzej , Kawecka, Elzbieta, Radomska-Zalas, Aleksandra, AND Pude, Frank. "Optimization of Abrasive Waterjet Cutting by Using the CODAS Method with Regard to Interdependent Processing Parameters" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 69 Number 9-10 (16 August 2023)
Strojniški vestnik - Journal of Mechanical Engineering 69(2023)9-10, 367-375
© The Authors 2023. CC BY 4.0 Int.
The paper shows performance optimization effects of steel machining by abrasive water jet (AWJ). An innovative combinative distance-based assessment method (CODAS) is implemented for the optimization of cutting parameters like pump pressure, feed rate, and abrasive flow rate over cutting depth, and cut kerf surface roughness. The CODAS algorithm is among those based on measuring the distance between a scenario (in this case processing parameters in terms of performance and quality indicators) - and a certain benchmark. A benchmark is a specific hypothetical set of processing parameters devised or determined from available data. To determine the best set of process control parameters, a CODAS approach was performed with some weighting determinations. To set the initial parameters of the weights, it was proposed to calculate based on entropy weight method (EWM), that measures output value dispersion in cutting process. This technique simplifies multiple compound responses by preserving a single response.