OSTERMAN, Eneja ;BUTALA, Vincenc ;STRITIH, Uroš . Parametric Analysis of PCM Thermal Storage System in an Annual Period. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 64, n.5, p. 283-289, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/parametric-analysis-of-pcm-thermal-storage-system-in-an-annual-period/>. Date accessed: 10 dec. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2017.4906.
Osterman, E., Butala, V., & Stritih, U. (2018). Parametric Analysis of PCM Thermal Storage System in an Annual Period. Strojniški vestnik - Journal of Mechanical Engineering, 64(5), 283-289. doi:http://dx.doi.org/10.5545/sv-jme.2017.4906
@article{sv-jmesv-jme.2017.4906, author = {Eneja Osterman and Vincenc Butala and Uroš Stritih}, title = {Parametric Analysis of PCM Thermal Storage System in an Annual Period}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {64}, number = {5}, year = {2018}, keywords = {thermal energy storage with plates, PCM, heating and cooling, parametrical analysis, annual evaluation}, abstract = {Using thermal energy storage (TES) in phase change materials (PCMs) can reduce energy consumption in buildings. In summer, cold can be stored at night and released during the daytime therefore reducing the temperature while in winter, the system can be connected to a solar air collector that supplies heat. This article presents a paraffin based thermal storage unit and its annual operation. A 2D model is set up in Fluent, thereby calculating the thermal response of the unit. The cooling and heating modes along with a numerical analysis of different parameters are considered and the best ones are determined for the city of Ljubljana.}, issn = {0039-2480}, pages = {283-289}, doi = {10.5545/sv-jme.2017.4906}, url = {https://www.sv-jme.eu/sl/article/parametric-analysis-of-pcm-thermal-storage-system-in-an-annual-period/} }
Osterman, E.,Butala, V.,Stritih, U. 2018 June 64. Parametric Analysis of PCM Thermal Storage System in an Annual Period. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 64:5
%A Osterman, Eneja %A Butala, Vincenc %A Stritih, Uroš %D 2018 %T Parametric Analysis of PCM Thermal Storage System in an Annual Period %B 2018 %9 thermal energy storage with plates, PCM, heating and cooling, parametrical analysis, annual evaluation %! Parametric Analysis of PCM Thermal Storage System in an Annual Period %K thermal energy storage with plates, PCM, heating and cooling, parametrical analysis, annual evaluation %X Using thermal energy storage (TES) in phase change materials (PCMs) can reduce energy consumption in buildings. In summer, cold can be stored at night and released during the daytime therefore reducing the temperature while in winter, the system can be connected to a solar air collector that supplies heat. This article presents a paraffin based thermal storage unit and its annual operation. A 2D model is set up in Fluent, thereby calculating the thermal response of the unit. The cooling and heating modes along with a numerical analysis of different parameters are considered and the best ones are determined for the city of Ljubljana. %U https://www.sv-jme.eu/sl/article/parametric-analysis-of-pcm-thermal-storage-system-in-an-annual-period/ %0 Journal Article %R 10.5545/sv-jme.2017.4906 %& 283 %P 7 %J Strojniški vestnik - Journal of Mechanical Engineering %V 64 %N 5 %@ 0039-2480 %8 2018-06-26 %7 2018-06-26
Osterman, Eneja, Vincenc Butala, & Uroš Stritih. "Parametric Analysis of PCM Thermal Storage System in an Annual Period." Strojniški vestnik - Journal of Mechanical Engineering [Online], 64.5 (2018): 283-289. Web. 10 Dec. 2024
TY - JOUR AU - Osterman, Eneja AU - Butala, Vincenc AU - Stritih, Uroš PY - 2018 TI - Parametric Analysis of PCM Thermal Storage System in an Annual Period JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2017.4906 KW - thermal energy storage with plates, PCM, heating and cooling, parametrical analysis, annual evaluation N2 - Using thermal energy storage (TES) in phase change materials (PCMs) can reduce energy consumption in buildings. In summer, cold can be stored at night and released during the daytime therefore reducing the temperature while in winter, the system can be connected to a solar air collector that supplies heat. This article presents a paraffin based thermal storage unit and its annual operation. A 2D model is set up in Fluent, thereby calculating the thermal response of the unit. The cooling and heating modes along with a numerical analysis of different parameters are considered and the best ones are determined for the city of Ljubljana. UR - https://www.sv-jme.eu/sl/article/parametric-analysis-of-pcm-thermal-storage-system-in-an-annual-period/
@article{{sv-jme}{sv-jme.2017.4906}, author = {Osterman, E., Butala, V., Stritih, U.}, title = {Parametric Analysis of PCM Thermal Storage System in an Annual Period}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {64}, number = {5}, year = {2018}, doi = {10.5545/sv-jme.2017.4906}, url = {https://www.sv-jme.eu/sl/article/parametric-analysis-of-pcm-thermal-storage-system-in-an-annual-period/} }
TY - JOUR AU - Osterman, Eneja AU - Butala, Vincenc AU - Stritih, Uroš PY - 2018/06/26 TI - Parametric Analysis of PCM Thermal Storage System in an Annual Period JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 64, No 5 (2018): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2017.4906 KW - thermal energy storage with plates, PCM, heating and cooling, parametrical analysis, annual evaluation N2 - Using thermal energy storage (TES) in phase change materials (PCMs) can reduce energy consumption in buildings. In summer, cold can be stored at night and released during the daytime therefore reducing the temperature while in winter, the system can be connected to a solar air collector that supplies heat. This article presents a paraffin based thermal storage unit and its annual operation. A 2D model is set up in Fluent, thereby calculating the thermal response of the unit. The cooling and heating modes along with a numerical analysis of different parameters are considered and the best ones are determined for the city of Ljubljana. UR - https://www.sv-jme.eu/sl/article/parametric-analysis-of-pcm-thermal-storage-system-in-an-annual-period/
Osterman, Eneja, Butala, Vincenc, AND Stritih, Uroš. "Parametric Analysis of PCM Thermal Storage System in an Annual Period" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 64 Number 5 (26 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 64(2018)5, 283-289
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
Using thermal energy storage (TES) in phase change materials (PCMs) can reduce energy consumption in buildings. In summer, cold can be stored at night and released during the daytime therefore reducing the temperature while in winter, the system can be connected to a solar air collector that supplies heat. This article presents a paraffin based thermal storage unit and its annual operation. A 2D model is set up in Fluent, thereby calculating the thermal response of the unit. The cooling and heating modes along with a numerical analysis of different parameters are considered and the best ones are determined for the city of Ljubljana.