Prediction of Wall Thickness Distribution in Simple Thermoforming Moulds

1595 Ogledov
1958 Prenosov
Izvoz citacije: ABNT
SELCUK ERDOGAN, Ertugrul ;EKSI, Olcay .
Prediction of Wall Thickness Distribution in Simple Thermoforming Moulds. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 60, n.3, p. 195-202, june 2018. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/prediction-of-wall-thickness-distribution-in-simple-thermoforming-moulds/>. Date accessed: 11 apr. 2021. 
doi:http://dx.doi.org/10.5545/sv-jme.2013.1486.
Selcuk Erdogan, E., & Eksi, O.
(2014).
Prediction of Wall Thickness Distribution in Simple Thermoforming Moulds.
Strojniški vestnik - Journal of Mechanical Engineering, 60(3), 195-202.
doi:http://dx.doi.org/10.5545/sv-jme.2013.1486
@article{sv-jmesv-jme.2013.1486,
	author = {Ertugrul  Selcuk Erdogan and Olcay  Eksi},
	title = {Prediction of Wall Thickness Distribution in Simple Thermoforming Moulds},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {60},
	number = {3},
	year = {2014},
	keywords = {thermoforming, wall thickness prediction, geometric element analysis (GEA), polystyrene, polypropylene.},
	abstract = {Thermoforming is widely used in manufacturing industries to produce large and labour-intensive products. Compared to other manufacturing techniques, thermoforming is a very efficient process that is suitable for high-efficiency mass production. In this paper, experimental thermoforming operations were carried out using a lab-scale, sheet-fed thermoformer. Carbon fibre reinforced PP and unreinforced PS thermoplastic sheets were used in the experimental thermoforming operations. The processing parameters were determined for each thermoformed material. Moreover, a simulation of the thermoforming process was performed using LS-DynaTM software. The thickness distributions obtained from the experiments were compared with the simulation results. The results show that the parameter that affects the wall thickness distribution the most is the geometry of clamping ring. To produce thermoformed products that have a more uniform thickness distribution, the clamping tool geometry must be selected according to the geometry of the product being thermoformed.},
	issn = {0039-2480},	pages = {195-202},	doi = {10.5545/sv-jme.2013.1486},
	url = {https://www.sv-jme.eu/sl/article/prediction-of-wall-thickness-distribution-in-simple-thermoforming-moulds/}
}
Selcuk Erdogan, E.,Eksi, O.
2014 June 60. Prediction of Wall Thickness Distribution in Simple Thermoforming Moulds. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 60:3
%A Selcuk Erdogan, Ertugrul 
%A Eksi, Olcay 
%D 2014
%T Prediction of Wall Thickness Distribution in Simple Thermoforming Moulds
%B 2014
%9 thermoforming, wall thickness prediction, geometric element analysis (GEA), polystyrene, polypropylene.
%! Prediction of Wall Thickness Distribution in Simple Thermoforming Moulds
%K thermoforming, wall thickness prediction, geometric element analysis (GEA), polystyrene, polypropylene.
%X Thermoforming is widely used in manufacturing industries to produce large and labour-intensive products. Compared to other manufacturing techniques, thermoforming is a very efficient process that is suitable for high-efficiency mass production. In this paper, experimental thermoforming operations were carried out using a lab-scale, sheet-fed thermoformer. Carbon fibre reinforced PP and unreinforced PS thermoplastic sheets were used in the experimental thermoforming operations. The processing parameters were determined for each thermoformed material. Moreover, a simulation of the thermoforming process was performed using LS-DynaTM software. The thickness distributions obtained from the experiments were compared with the simulation results. The results show that the parameter that affects the wall thickness distribution the most is the geometry of clamping ring. To produce thermoformed products that have a more uniform thickness distribution, the clamping tool geometry must be selected according to the geometry of the product being thermoformed.
%U https://www.sv-jme.eu/sl/article/prediction-of-wall-thickness-distribution-in-simple-thermoforming-moulds/
%0 Journal Article
%R 10.5545/sv-jme.2013.1486
%& 195
%P 8
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 60
%N 3
%@ 0039-2480
%8 2018-06-28
%7 2018-06-28
Selcuk Erdogan, Ertugrul, & Olcay  Eksi.
"Prediction of Wall Thickness Distribution in Simple Thermoforming Moulds." Strojniški vestnik - Journal of Mechanical Engineering [Online], 60.3 (2014): 195-202. Web.  11 Apr. 2021
TY  - JOUR
AU  - Selcuk Erdogan, Ertugrul 
AU  - Eksi, Olcay 
PY  - 2014
TI  - Prediction of Wall Thickness Distribution in Simple Thermoforming Moulds
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2013.1486
KW  - thermoforming, wall thickness prediction, geometric element analysis (GEA), polystyrene, polypropylene.
N2  - Thermoforming is widely used in manufacturing industries to produce large and labour-intensive products. Compared to other manufacturing techniques, thermoforming is a very efficient process that is suitable for high-efficiency mass production. In this paper, experimental thermoforming operations were carried out using a lab-scale, sheet-fed thermoformer. Carbon fibre reinforced PP and unreinforced PS thermoplastic sheets were used in the experimental thermoforming operations. The processing parameters were determined for each thermoformed material. Moreover, a simulation of the thermoforming process was performed using LS-DynaTM software. The thickness distributions obtained from the experiments were compared with the simulation results. The results show that the parameter that affects the wall thickness distribution the most is the geometry of clamping ring. To produce thermoformed products that have a more uniform thickness distribution, the clamping tool geometry must be selected according to the geometry of the product being thermoformed.
UR  - https://www.sv-jme.eu/sl/article/prediction-of-wall-thickness-distribution-in-simple-thermoforming-moulds/
@article{{sv-jme}{sv-jme.2013.1486},
	author = {Selcuk Erdogan, E., Eksi, O.},
	title = {Prediction of Wall Thickness Distribution in Simple Thermoforming Moulds},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {60},
	number = {3},
	year = {2014},
	doi = {10.5545/sv-jme.2013.1486},
	url = {https://www.sv-jme.eu/sl/article/prediction-of-wall-thickness-distribution-in-simple-thermoforming-moulds/}
}
TY  - JOUR
AU  - Selcuk Erdogan, Ertugrul 
AU  - Eksi, Olcay 
PY  - 2018/06/28
TI  - Prediction of Wall Thickness Distribution in Simple Thermoforming Moulds
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 60, No 3 (2014): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2013.1486
KW  - thermoforming, wall thickness prediction, geometric element analysis (GEA), polystyrene, polypropylene.
N2  - Thermoforming is widely used in manufacturing industries to produce large and labour-intensive products. Compared to other manufacturing techniques, thermoforming is a very efficient process that is suitable for high-efficiency mass production. In this paper, experimental thermoforming operations were carried out using a lab-scale, sheet-fed thermoformer. Carbon fibre reinforced PP and unreinforced PS thermoplastic sheets were used in the experimental thermoforming operations. The processing parameters were determined for each thermoformed material. Moreover, a simulation of the thermoforming process was performed using LS-DynaTM software. The thickness distributions obtained from the experiments were compared with the simulation results. The results show that the parameter that affects the wall thickness distribution the most is the geometry of clamping ring. To produce thermoformed products that have a more uniform thickness distribution, the clamping tool geometry must be selected according to the geometry of the product being thermoformed.
UR  - https://www.sv-jme.eu/sl/article/prediction-of-wall-thickness-distribution-in-simple-thermoforming-moulds/
Selcuk Erdogan, Ertugrul, AND Eksi, Olcay.
"Prediction of Wall Thickness Distribution in Simple Thermoforming Moulds" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 60 Number 3 (28 June 2018)

Avtorji

Inštitucije

  • Trakya University, Engineering Faculty, Turkey 1
  • Namık Kemal University, Çorlu Engineering Faculty, Turkey 2

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 60(2014)3, 195-202

https://doi.org/10.5545/sv-jme.2013.1486

Thermoforming is widely used in manufacturing industries to produce large and labour-intensive products. Compared to other manufacturing techniques, thermoforming is a very efficient process that is suitable for high-efficiency mass production. In this paper, experimental thermoforming operations were carried out using a lab-scale, sheet-fed thermoformer. Carbon fibre reinforced PP and unreinforced PS thermoplastic sheets were used in the experimental thermoforming operations. The processing parameters were determined for each thermoformed material. Moreover, a simulation of the thermoforming process was performed using LS-DynaTM software. The thickness distributions obtained from the experiments were compared with the simulation results. The results show that the parameter that affects the wall thickness distribution the most is the geometry of clamping ring. To produce thermoformed products that have a more uniform thickness distribution, the clamping tool geometry must be selected according to the geometry of the product being thermoformed.

thermoforming, wall thickness prediction, geometric element analysis (GEA), polystyrene, polypropylene.