Reconstruction of an Air-Spring Piston

856 Ogledov
586 Prenosov
Izvoz citacije: ABNT
BEŠTER, Tomaž .
Reconstruction of an Air-Spring Piston. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 48, n.7, p. 404-413, july 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/reconstruction-of-an-air-spring-piston/>. Date accessed: 27 oct. 2020. 
doi:http://dx.doi.org/.
Bešter, T.
(2002).
Reconstruction of an Air-Spring Piston.
Strojniški vestnik - Journal of Mechanical Engineering, 48(7), 404-413.
doi:http://dx.doi.org/
@article{.,
	author = {Tomaž  Bešter},
	title = {Reconstruction of an Air-Spring Piston},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {48},
	number = {7},
	year = {2002},
	keywords = {air springs; pistons; strength analysis; modifications; },
	abstract = {An air-spring piston, produced by Goodyear EPE (Engineered Products Europe), is able to withstand all the loads that are required by European Engineering Standards when it is supported on its entire lower surface. When the piston was only supported on a part of the lower surface it was not able to withstand all the loads. To solve this problem we made a strength analysis of the existing piston. The piston was then modified so that it was able to withstand all the required loads.},
	issn = {0039-2480},	pages = {404-413},	doi = {},
	url = {https://www.sv-jme.eu/sl/article/reconstruction-of-an-air-spring-piston/}
}
Bešter, T.
2002 July 48. Reconstruction of an Air-Spring Piston. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 48:7
%A Bešter, Tomaž 
%D 2002
%T Reconstruction of an Air-Spring Piston
%B 2002
%9 air springs; pistons; strength analysis; modifications; 
%! Reconstruction of an Air-Spring Piston
%K air springs; pistons; strength analysis; modifications; 
%X An air-spring piston, produced by Goodyear EPE (Engineered Products Europe), is able to withstand all the loads that are required by European Engineering Standards when it is supported on its entire lower surface. When the piston was only supported on a part of the lower surface it was not able to withstand all the loads. To solve this problem we made a strength analysis of the existing piston. The piston was then modified so that it was able to withstand all the required loads.
%U https://www.sv-jme.eu/sl/article/reconstruction-of-an-air-spring-piston/
%0 Journal Article
%R 
%& 404
%P 10
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 48
%N 7
%@ 0039-2480
%8 2017-07-07
%7 2017-07-07
Bešter, Tomaž.
"Reconstruction of an Air-Spring Piston." Strojniški vestnik - Journal of Mechanical Engineering [Online], 48.7 (2002): 404-413. Web.  27 Oct. 2020
TY  - JOUR
AU  - Bešter, Tomaž 
PY  - 2002
TI  - Reconstruction of an Air-Spring Piston
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - air springs; pistons; strength analysis; modifications; 
N2  - An air-spring piston, produced by Goodyear EPE (Engineered Products Europe), is able to withstand all the loads that are required by European Engineering Standards when it is supported on its entire lower surface. When the piston was only supported on a part of the lower surface it was not able to withstand all the loads. To solve this problem we made a strength analysis of the existing piston. The piston was then modified so that it was able to withstand all the required loads.
UR  - https://www.sv-jme.eu/sl/article/reconstruction-of-an-air-spring-piston/
@article{{}{.},
	author = {Bešter, T.},
	title = {Reconstruction of an Air-Spring Piston},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {48},
	number = {7},
	year = {2002},
	doi = {},
	url = {https://www.sv-jme.eu/sl/article/reconstruction-of-an-air-spring-piston/}
}
TY  - JOUR
AU  - Bešter, Tomaž 
PY  - 2017/07/07
TI  - Reconstruction of an Air-Spring Piston
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 48, No 7 (2002): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - air springs, pistons, strength analysis, modifications, 
N2  - An air-spring piston, produced by Goodyear EPE (Engineered Products Europe), is able to withstand all the loads that are required by European Engineering Standards when it is supported on its entire lower surface. When the piston was only supported on a part of the lower surface it was not able to withstand all the loads. To solve this problem we made a strength analysis of the existing piston. The piston was then modified so that it was able to withstand all the required loads.
UR  - https://www.sv-jme.eu/sl/article/reconstruction-of-an-air-spring-piston/
Bešter, Tomaž"Reconstruction of an Air-Spring Piston" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 48 Number 7 (07 July 2017)

Avtorji

Inštitucije

  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 48(2002)7, 404-413

An air-spring piston, produced by Goodyear EPE (Engineered Products Europe), is able to withstand all the loads that are required by European Engineering Standards when it is supported on its entire lower surface. When the piston was only supported on a part of the lower surface it was not able to withstand all the loads. To solve this problem we made a strength analysis of the existing piston. The piston was then modified so that it was able to withstand all the required loads.

air springs; pistons; strength analysis; modifications;