Residual, Corrosion & Tribological Behavior of HVOF Sprayed Sustainable Temperature-Dependent Carbon-Based Hybrid Composite Coating

298 Ogledov
272 Prenosov
Izvoz citacije: ABNT
TYAGI, Ankit ;MURTAZA, Qasim ;WALIA, Ravinderjit Singh.
Residual, Corrosion & Tribological Behavior of HVOF Sprayed Sustainable Temperature-Dependent Carbon-Based Hybrid Composite Coating. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 67, n.4, p. 191-199, may 2021. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/residual-corrosion-tribological-behavior-of-hvof-sprayed-sustainable-temperature-dependent-carbon-based-hybrid-composite-coating/>. Date accessed: 25 oct. 2021. 
doi:http://dx.doi.org/10.5545/sv-jme.2021.7101.
Tyagi, A., Murtaza, Q., & Walia, R.
(2021).
Residual, Corrosion & Tribological Behavior of HVOF Sprayed Sustainable Temperature-Dependent Carbon-Based Hybrid Composite Coating.
Strojniški vestnik - Journal of Mechanical Engineering, 67(4), 191-199.
doi:http://dx.doi.org/10.5545/sv-jme.2021.7101
@article{sv-jmesv-jme.2021.7101,
	author = {Ankit  Tyagi and Qasim  Murtaza and Ravinderjit Singh Walia},
	title = {Residual, Corrosion & Tribological Behavior of HVOF Sprayed Sustainable Temperature-Dependent Carbon-Based Hybrid Composite Coating},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {67},
	number = {4},
	year = {2021},
	keywords = {HVOF carbon coating, FESEM, HRXRD, Raman spectra test, corrosion, wear test},
	abstract = {At present, cost-effective coatings that cause less pollution are in great demand; to decrease frictional losses, carbon-based hybrid composite coatings have been developed using a high-velocity oxy-fuel (HVOF) spray process. The microstructural, tribological, corrosion, and mechanical properties of these coatings have been evaluated using high-resolution X-ray diffraction (HRXRD), field emission scanning electron microscopy-Energy dispersive X-ray Spectroscopy (FESEM-EDS), Raman spectrum, Vickers micro-hardness tester, µ-360 cos(α) residual stress analyser, corrosion tester, and high temperature tribometer. The residual stress, corrosion and tribological behaviour at high temperatures were investigated using a pin-on-disc high-temperature tribometer. The tribological performance was evaluated using a high-temperature tribometer, and the experimental result shows that a coefficient of friction (COF) varies from 0.12 to 0.52, while wear results were in the range of 45 µm to 120 µm, as the test condition of temperature ranging from 50 °C to 350 °C, load from 60 N to 90 N and sliding velocity from 0.1 m/s to 0.4 m/s respectively. The experimental results of corrosion testing show that the mass loss decreases from 0.10 g to 0.04 g, when samples were dipped for 1 h; when the samples were dipped for 8 h, the mass loss of hybrid composite coating varied from 0.12 g to 0.045 g. The tribological test showed a 78.9 % increase in micro-hardness, a 78 % decrease in residual stress, and 60 % and 62.5 % decreases in mass loss due to corrosion at 1 h and 8 h, respectively, a 76.9 % decrease in COF and 62.5 % reduction in the wear at test condition of 350 ºC temperature, a sliding velocity of 0.4 m/s and 90 N load.},
	issn = {0039-2480},	pages = {191-199},	doi = {10.5545/sv-jme.2021.7101},
	url = {https://www.sv-jme.eu/sl/article/residual-corrosion-tribological-behavior-of-hvof-sprayed-sustainable-temperature-dependent-carbon-based-hybrid-composite-coating/}
}
Tyagi, A.,Murtaza, Q.,Walia, R.
2021 May 67. Residual, Corrosion & Tribological Behavior of HVOF Sprayed Sustainable Temperature-Dependent Carbon-Based Hybrid Composite Coating. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 67:4
%A Tyagi, Ankit 
%A Murtaza, Qasim 
%A Walia, Ravinderjit Singh
%D 2021
%T Residual, Corrosion & Tribological Behavior of HVOF Sprayed Sustainable Temperature-Dependent Carbon-Based Hybrid Composite Coating
%B 2021
%9 HVOF carbon coating, FESEM, HRXRD, Raman spectra test, corrosion, wear test
%! Residual, Corrosion & Tribological Behavior of HVOF Sprayed Sustainable Temperature-Dependent Carbon-Based Hybrid Composite Coating
%K HVOF carbon coating, FESEM, HRXRD, Raman spectra test, corrosion, wear test
%X At present, cost-effective coatings that cause less pollution are in great demand; to decrease frictional losses, carbon-based hybrid composite coatings have been developed using a high-velocity oxy-fuel (HVOF) spray process. The microstructural, tribological, corrosion, and mechanical properties of these coatings have been evaluated using high-resolution X-ray diffraction (HRXRD), field emission scanning electron microscopy-Energy dispersive X-ray Spectroscopy (FESEM-EDS), Raman spectrum, Vickers micro-hardness tester, µ-360 cos(α) residual stress analyser, corrosion tester, and high temperature tribometer. The residual stress, corrosion and tribological behaviour at high temperatures were investigated using a pin-on-disc high-temperature tribometer. The tribological performance was evaluated using a high-temperature tribometer, and the experimental result shows that a coefficient of friction (COF) varies from 0.12 to 0.52, while wear results were in the range of 45 µm to 120 µm, as the test condition of temperature ranging from 50 °C to 350 °C, load from 60 N to 90 N and sliding velocity from 0.1 m/s to 0.4 m/s respectively. The experimental results of corrosion testing show that the mass loss decreases from 0.10 g to 0.04 g, when samples were dipped for 1 h; when the samples were dipped for 8 h, the mass loss of hybrid composite coating varied from 0.12 g to 0.045 g. The tribological test showed a 78.9 % increase in micro-hardness, a 78 % decrease in residual stress, and 60 % and 62.5 % decreases in mass loss due to corrosion at 1 h and 8 h, respectively, a 76.9 % decrease in COF and 62.5 % reduction in the wear at test condition of 350 ºC temperature, a sliding velocity of 0.4 m/s and 90 N load.
%U https://www.sv-jme.eu/sl/article/residual-corrosion-tribological-behavior-of-hvof-sprayed-sustainable-temperature-dependent-carbon-based-hybrid-composite-coating/
%0 Journal Article
%R 10.5545/sv-jme.2021.7101
%& 191
%P 9
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 67
%N 4
%@ 0039-2480
%8 2021-05-05
%7 2021-05-05
Tyagi, Ankit, Qasim  Murtaza, & Ravinderjit Singh Walia.
"Residual, Corrosion & Tribological Behavior of HVOF Sprayed Sustainable Temperature-Dependent Carbon-Based Hybrid Composite Coating." Strojniški vestnik - Journal of Mechanical Engineering [Online], 67.4 (2021): 191-199. Web.  25 Oct. 2021
TY  - JOUR
AU  - Tyagi, Ankit 
AU  - Murtaza, Qasim 
AU  - Walia, Ravinderjit Singh
PY  - 2021
TI  - Residual, Corrosion & Tribological Behavior of HVOF Sprayed Sustainable Temperature-Dependent Carbon-Based Hybrid Composite Coating
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2021.7101
KW  - HVOF carbon coating, FESEM, HRXRD, Raman spectra test, corrosion, wear test
N2  - At present, cost-effective coatings that cause less pollution are in great demand; to decrease frictional losses, carbon-based hybrid composite coatings have been developed using a high-velocity oxy-fuel (HVOF) spray process. The microstructural, tribological, corrosion, and mechanical properties of these coatings have been evaluated using high-resolution X-ray diffraction (HRXRD), field emission scanning electron microscopy-Energy dispersive X-ray Spectroscopy (FESEM-EDS), Raman spectrum, Vickers micro-hardness tester, µ-360 cos(α) residual stress analyser, corrosion tester, and high temperature tribometer. The residual stress, corrosion and tribological behaviour at high temperatures were investigated using a pin-on-disc high-temperature tribometer. The tribological performance was evaluated using a high-temperature tribometer, and the experimental result shows that a coefficient of friction (COF) varies from 0.12 to 0.52, while wear results were in the range of 45 µm to 120 µm, as the test condition of temperature ranging from 50 °C to 350 °C, load from 60 N to 90 N and sliding velocity from 0.1 m/s to 0.4 m/s respectively. The experimental results of corrosion testing show that the mass loss decreases from 0.10 g to 0.04 g, when samples were dipped for 1 h; when the samples were dipped for 8 h, the mass loss of hybrid composite coating varied from 0.12 g to 0.045 g. The tribological test showed a 78.9 % increase in micro-hardness, a 78 % decrease in residual stress, and 60 % and 62.5 % decreases in mass loss due to corrosion at 1 h and 8 h, respectively, a 76.9 % decrease in COF and 62.5 % reduction in the wear at test condition of 350 ºC temperature, a sliding velocity of 0.4 m/s and 90 N load.
UR  - https://www.sv-jme.eu/sl/article/residual-corrosion-tribological-behavior-of-hvof-sprayed-sustainable-temperature-dependent-carbon-based-hybrid-composite-coating/
@article{{sv-jme}{sv-jme.2021.7101},
	author = {Tyagi, A., Murtaza, Q., Walia, R.},
	title = {Residual, Corrosion & Tribological Behavior of HVOF Sprayed Sustainable Temperature-Dependent Carbon-Based Hybrid Composite Coating},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {67},
	number = {4},
	year = {2021},
	doi = {10.5545/sv-jme.2021.7101},
	url = {https://www.sv-jme.eu/sl/article/residual-corrosion-tribological-behavior-of-hvof-sprayed-sustainable-temperature-dependent-carbon-based-hybrid-composite-coating/}
}
TY  - JOUR
AU  - Tyagi, Ankit 
AU  - Murtaza, Qasim 
AU  - Walia, Ravinderjit Singh
PY  - 2021/05/05
TI  - Residual, Corrosion & Tribological Behavior of HVOF Sprayed Sustainable Temperature-Dependent Carbon-Based Hybrid Composite Coating
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 67, No 4 (2021): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2021.7101
KW  - HVOF carbon coating, FESEM, HRXRD, Raman spectra test, corrosion, wear test
N2  - At present, cost-effective coatings that cause less pollution are in great demand; to decrease frictional losses, carbon-based hybrid composite coatings have been developed using a high-velocity oxy-fuel (HVOF) spray process. The microstructural, tribological, corrosion, and mechanical properties of these coatings have been evaluated using high-resolution X-ray diffraction (HRXRD), field emission scanning electron microscopy-Energy dispersive X-ray Spectroscopy (FESEM-EDS), Raman spectrum, Vickers micro-hardness tester, µ-360 cos(α) residual stress analyser, corrosion tester, and high temperature tribometer. The residual stress, corrosion and tribological behaviour at high temperatures were investigated using a pin-on-disc high-temperature tribometer. The tribological performance was evaluated using a high-temperature tribometer, and the experimental result shows that a coefficient of friction (COF) varies from 0.12 to 0.52, while wear results were in the range of 45 µm to 120 µm, as the test condition of temperature ranging from 50 °C to 350 °C, load from 60 N to 90 N and sliding velocity from 0.1 m/s to 0.4 m/s respectively. The experimental results of corrosion testing show that the mass loss decreases from 0.10 g to 0.04 g, when samples were dipped for 1 h; when the samples were dipped for 8 h, the mass loss of hybrid composite coating varied from 0.12 g to 0.045 g. The tribological test showed a 78.9 % increase in micro-hardness, a 78 % decrease in residual stress, and 60 % and 62.5 % decreases in mass loss due to corrosion at 1 h and 8 h, respectively, a 76.9 % decrease in COF and 62.5 % reduction in the wear at test condition of 350 ºC temperature, a sliding velocity of 0.4 m/s and 90 N load.
UR  - https://www.sv-jme.eu/sl/article/residual-corrosion-tribological-behavior-of-hvof-sprayed-sustainable-temperature-dependent-carbon-based-hybrid-composite-coating/
Tyagi, Ankit, Murtaza, Qasim, AND Walia, Ravinderjit.
"Residual, Corrosion & Tribological Behavior of HVOF Sprayed Sustainable Temperature-Dependent Carbon-Based Hybrid Composite Coating" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 67 Number 4 (05 May 2021)

Avtorji

Inštitucije

  • Delhi Technological University, Department of Mechanical Engineering, India & SGT University, Department of Mechanical Engineering, India 1
  • Delhi Technological University, Department of Mechanical Engineering, India 2
  • Punjab Engineering College, Department of Production & Industrial engineering, India 3

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 67(2021)4, 191-199

https://doi.org/10.5545/sv-jme.2021.7101

At present, cost-effective coatings that cause less pollution are in great demand; to decrease frictional losses, carbon-based hybrid composite coatings have been developed using a high-velocity oxy-fuel (HVOF) spray process. The microstructural, tribological, corrosion, and mechanical properties of these coatings have been evaluated using high-resolution X-ray diffraction (HRXRD), field emission scanning electron microscopy-Energy dispersive X-ray Spectroscopy (FESEM-EDS), Raman spectrum, Vickers micro-hardness tester, µ-360 cos(α) residual stress analyser, corrosion tester, and high temperature tribometer. The residual stress, corrosion and tribological behaviour at high temperatures were investigated using a pin-on-disc high-temperature tribometer. The tribological performance was evaluated using a high-temperature tribometer, and the experimental result shows that a coefficient of friction (COF) varies from 0.12 to 0.52, while wear results were in the range of 45 µm to 120 µm, as the test condition of temperature ranging from 50 °C to 350 °C, load from 60 N to 90 N and sliding velocity from 0.1 m/s to 0.4 m/s respectively. The experimental results of corrosion testing show that the mass loss decreases from 0.10 g to 0.04 g, when samples were dipped for 1 h; when the samples were dipped for 8 h, the mass loss of hybrid composite coating varied from 0.12 g to 0.045 g. The tribological test showed a 78.9 % increase in micro-hardness, a 78 % decrease in residual stress, and 60 % and 62.5 % decreases in mass loss due to corrosion at 1 h and 8 h, respectively, a 76.9 % decrease in COF and 62.5 % reduction in the wear at test condition of 350 ºC temperature, a sliding velocity of 0.4 m/s and 90 N load.

HVOF carbon coating, FESEM, HRXRD, Raman spectra test, corrosion, wear test