Selection of Agitators for Heat Transfer

550 Ogledov
239 Prenosov
Izvoz citacije: ABNT
OPARA, Mirko .
Selection of Agitators for Heat Transfer. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 40, n.7-8, p. 245-250, november 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/selection-of-agitators-for-heat-transfer/>. Date accessed: 13 nov. 2019. 
doi:http://dx.doi.org/.
Opara, M.
(1994).
Selection of Agitators for Heat Transfer.
Strojniški vestnik - Journal of Mechanical Engineering, 40(7-8), 245-250.
doi:http://dx.doi.org/
@article{.,
	author = {Mirko  Opara},
	title = {Selection of Agitators for Heat Transfer},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {40},
	number = {7-8},
	year = {1994},
	keywords = {Heat Transfer; Agitators; },
	abstract = {Mixing fluids in vessels with an agitator is performed in the most varied tasks in the field of mass and heat transfer, so it is not suprising that a great many agitators have been developed in practice, all applicable to a greater or lesser degree in individual tasks. In the literature, we most often find recommendations on the individual types of agitators in a predetermined viscosity range of mixed fluids or range of the agitator’s rotation speeds, which need to be used with considerable caution. Namely, these recommendations refer only to one aspect of the task performed by the agitator, while no attention is usually paid to the remaining parameters, among wich special emphasis should be given to the importance of power consumption for driving the agitator. Undoubtedly, the agitator using least energy for the implementation of a determined task is the most suitable one. Our paper will be limited to an examination of the possibility of an appropriate selection of agitators for heat transfer through the mixing vessel’s wall.},
	issn = {0039-2480},	pages = {245-250},	doi = {},
	url = {https://www.sv-jme.eu/sl/article/selection-of-agitators-for-heat-transfer/}
}
Opara, M.
1994 November 40. Selection of Agitators for Heat Transfer. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 40:7-8
%A Opara, Mirko 
%D 1994
%T Selection of Agitators for Heat Transfer
%B 1994
%9 Heat Transfer; Agitators; 
%! Selection of Agitators for Heat Transfer
%K Heat Transfer; Agitators; 
%X Mixing fluids in vessels with an agitator is performed in the most varied tasks in the field of mass and heat transfer, so it is not suprising that a great many agitators have been developed in practice, all applicable to a greater or lesser degree in individual tasks. In the literature, we most often find recommendations on the individual types of agitators in a predetermined viscosity range of mixed fluids or range of the agitator’s rotation speeds, which need to be used with considerable caution. Namely, these recommendations refer only to one aspect of the task performed by the agitator, while no attention is usually paid to the remaining parameters, among wich special emphasis should be given to the importance of power consumption for driving the agitator. Undoubtedly, the agitator using least energy for the implementation of a determined task is the most suitable one. Our paper will be limited to an examination of the possibility of an appropriate selection of agitators for heat transfer through the mixing vessel’s wall.
%U https://www.sv-jme.eu/sl/article/selection-of-agitators-for-heat-transfer/
%0 Journal Article
%R 
%& 245
%P 6
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 40
%N 7-8
%@ 0039-2480
%8 2017-11-11
%7 2017-11-11
Opara, Mirko.
"Selection of Agitators for Heat Transfer." Strojniški vestnik - Journal of Mechanical Engineering [Online], 40.7-8 (1994): 245-250. Web.  13 Nov. 2019
TY  - JOUR
AU  - Opara, Mirko 
PY  - 1994
TI  - Selection of Agitators for Heat Transfer
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - Heat Transfer; Agitators; 
N2  - Mixing fluids in vessels with an agitator is performed in the most varied tasks in the field of mass and heat transfer, so it is not suprising that a great many agitators have been developed in practice, all applicable to a greater or lesser degree in individual tasks. In the literature, we most often find recommendations on the individual types of agitators in a predetermined viscosity range of mixed fluids or range of the agitator’s rotation speeds, which need to be used with considerable caution. Namely, these recommendations refer only to one aspect of the task performed by the agitator, while no attention is usually paid to the remaining parameters, among wich special emphasis should be given to the importance of power consumption for driving the agitator. Undoubtedly, the agitator using least energy for the implementation of a determined task is the most suitable one. Our paper will be limited to an examination of the possibility of an appropriate selection of agitators for heat transfer through the mixing vessel’s wall.
UR  - https://www.sv-jme.eu/sl/article/selection-of-agitators-for-heat-transfer/
@article{{}{.},
	author = {Opara, M.},
	title = {Selection of Agitators for Heat Transfer},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {40},
	number = {7-8},
	year = {1994},
	doi = {},
	url = {https://www.sv-jme.eu/sl/article/selection-of-agitators-for-heat-transfer/}
}
TY  - JOUR
AU  - Opara, Mirko 
PY  - 2017/11/11
TI  - Selection of Agitators for Heat Transfer
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 40, No 7-8 (1994): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - Heat Transfer, Agitators, 
N2  - Mixing fluids in vessels with an agitator is performed in the most varied tasks in the field of mass and heat transfer, so it is not suprising that a great many agitators have been developed in practice, all applicable to a greater or lesser degree in individual tasks. In the literature, we most often find recommendations on the individual types of agitators in a predetermined viscosity range of mixed fluids or range of the agitator’s rotation speeds, which need to be used with considerable caution. Namely, these recommendations refer only to one aspect of the task performed by the agitator, while no attention is usually paid to the remaining parameters, among wich special emphasis should be given to the importance of power consumption for driving the agitator. Undoubtedly, the agitator using least energy for the implementation of a determined task is the most suitable one. Our paper will be limited to an examination of the possibility of an appropriate selection of agitators for heat transfer through the mixing vessel’s wall.
UR  - https://www.sv-jme.eu/sl/article/selection-of-agitators-for-heat-transfer/
Opara, Mirko"Selection of Agitators for Heat Transfer" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 40 Number 7-8 (11 November 2017)

Avtorji

Inštitucije

  • Smelt, Ljubljana, Slovenia

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 40(1994)7-8, 245-250

Mixing fluids in vessels with an agitator is performed in the most varied tasks in the field of mass and heat transfer, so it is not suprising that a great many agitators have been developed in practice, all applicable to a greater or lesser degree in individual tasks. In the literature, we most often find recommendations on the individual types of agitators in a predetermined viscosity range of mixed fluids or range of the agitator’s rotation speeds, which need to be used with considerable caution. Namely, these recommendations refer only to one aspect of the task performed by the agitator, while no attention is usually paid to the remaining parameters, among wich special emphasis should be given to the importance of power consumption for driving the agitator. Undoubtedly, the agitator using least energy for the implementation of a determined task is the most suitable one. Our paper will be limited to an examination of the possibility of an appropriate selection of agitators for heat transfer through the mixing vessel’s wall.

Heat Transfer; Agitators;