Stresses in Hollow Rotating Cylinder with Longitudinal Split

1032 Ogledov
868 Prenosov
Izvoz citacije: ABNT
BATISTA, Milan ;KOSEL, Franc .
Stresses in Hollow Rotating Cylinder with Longitudinal Split. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 41, n.1-2, p. 19-28, november 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/stresses-in-hollow-rotating-cylinder-with-longitudinal-split/>. Date accessed: 25 oct. 2021. 
doi:http://dx.doi.org/.
Batista, M., & Kosel, F.
(1995).
Stresses in Hollow Rotating Cylinder with Longitudinal Split.
Strojniški vestnik - Journal of Mechanical Engineering, 41(1-2), 19-28.
doi:http://dx.doi.org/
@article{.,
	author = {Milan  Batista and Franc  Kosel},
	title = {Stresses in Hollow Rotating Cylinder with Longitudinal Split},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {41},
	number = {1-2},
	year = {1995},
	keywords = {hollow rotating cylinder; longitudinal split; },
	abstract = {Investigation of the stress state in a rotating ring Is one of the basic steps In studying the bursting mechanism In different rotating machine components and tolls, for example a grinding wheel. A critical survey of the state of the art In this field of research was given by Bandera C., M. Nikol Ich and A. Strozzi, 1993. In their paper, they compare the maximum circumferential stress which appears on the Inner side of the longitudinal cross section planes of the hollow cylinder, the stresses being determined using several different methods: curved beam theory, straight beam theory and finite element method (FEM). They found that the maximum circumferential stresses determined by the straight beam theory and FEM are almost the same, whereas the other methods give lower values of maximum circumferential stresses. Large differences among the maximum circumferential stresses occur near the inner radii. By the curved beam theory and FEM, the maximum circumferential stresses Increase for radii ration from 0.15 downwards but, using the other two methods the same stresses decrease at these radii ratia. Our contribution presents a mathematical approach to determine the function of the stress state in the longitudinal section planes of the hollow cylinder, using the Airy function. Special emphasis is laid on the need to meet the boundary conditions on the longitudinal cross section planes of the hollow cylinder.},
	issn = {0039-2480},	pages = {19-28},	doi = {},
	url = {https://www.sv-jme.eu/sl/article/stresses-in-hollow-rotating-cylinder-with-longitudinal-split/}
}
Batista, M.,Kosel, F.
1995 November 41. Stresses in Hollow Rotating Cylinder with Longitudinal Split. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 41:1-2
%A Batista, Milan 
%A Kosel, Franc 
%D 1995
%T Stresses in Hollow Rotating Cylinder with Longitudinal Split
%B 1995
%9 hollow rotating cylinder; longitudinal split; 
%! Stresses in Hollow Rotating Cylinder with Longitudinal Split
%K hollow rotating cylinder; longitudinal split; 
%X Investigation of the stress state in a rotating ring Is one of the basic steps In studying the bursting mechanism In different rotating machine components and tolls, for example a grinding wheel. A critical survey of the state of the art In this field of research was given by Bandera C., M. Nikol Ich and A. Strozzi, 1993. In their paper, they compare the maximum circumferential stress which appears on the Inner side of the longitudinal cross section planes of the hollow cylinder, the stresses being determined using several different methods: curved beam theory, straight beam theory and finite element method (FEM). They found that the maximum circumferential stresses determined by the straight beam theory and FEM are almost the same, whereas the other methods give lower values of maximum circumferential stresses. Large differences among the maximum circumferential stresses occur near the inner radii. By the curved beam theory and FEM, the maximum circumferential stresses Increase for radii ration from 0.15 downwards but, using the other two methods the same stresses decrease at these radii ratia. Our contribution presents a mathematical approach to determine the function of the stress state in the longitudinal section planes of the hollow cylinder, using the Airy function. Special emphasis is laid on the need to meet the boundary conditions on the longitudinal cross section planes of the hollow cylinder.
%U https://www.sv-jme.eu/sl/article/stresses-in-hollow-rotating-cylinder-with-longitudinal-split/
%0 Journal Article
%R 
%& 19
%P 10
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 41
%N 1-2
%@ 0039-2480
%8 2017-11-11
%7 2017-11-11
Batista, Milan, & Franc  Kosel.
"Stresses in Hollow Rotating Cylinder with Longitudinal Split." Strojniški vestnik - Journal of Mechanical Engineering [Online], 41.1-2 (1995): 19-28. Web.  25 Oct. 2021
TY  - JOUR
AU  - Batista, Milan 
AU  - Kosel, Franc 
PY  - 1995
TI  - Stresses in Hollow Rotating Cylinder with Longitudinal Split
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - hollow rotating cylinder; longitudinal split; 
N2  - Investigation of the stress state in a rotating ring Is one of the basic steps In studying the bursting mechanism In different rotating machine components and tolls, for example a grinding wheel. A critical survey of the state of the art In this field of research was given by Bandera C., M. Nikol Ich and A. Strozzi, 1993. In their paper, they compare the maximum circumferential stress which appears on the Inner side of the longitudinal cross section planes of the hollow cylinder, the stresses being determined using several different methods: curved beam theory, straight beam theory and finite element method (FEM). They found that the maximum circumferential stresses determined by the straight beam theory and FEM are almost the same, whereas the other methods give lower values of maximum circumferential stresses. Large differences among the maximum circumferential stresses occur near the inner radii. By the curved beam theory and FEM, the maximum circumferential stresses Increase for radii ration from 0.15 downwards but, using the other two methods the same stresses decrease at these radii ratia. Our contribution presents a mathematical approach to determine the function of the stress state in the longitudinal section planes of the hollow cylinder, using the Airy function. Special emphasis is laid on the need to meet the boundary conditions on the longitudinal cross section planes of the hollow cylinder.
UR  - https://www.sv-jme.eu/sl/article/stresses-in-hollow-rotating-cylinder-with-longitudinal-split/
@article{{}{.},
	author = {Batista, M., Kosel, F.},
	title = {Stresses in Hollow Rotating Cylinder with Longitudinal Split},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {41},
	number = {1-2},
	year = {1995},
	doi = {},
	url = {https://www.sv-jme.eu/sl/article/stresses-in-hollow-rotating-cylinder-with-longitudinal-split/}
}
TY  - JOUR
AU  - Batista, Milan 
AU  - Kosel, Franc 
PY  - 2017/11/11
TI  - Stresses in Hollow Rotating Cylinder with Longitudinal Split
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 41, No 1-2 (1995): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - hollow rotating cylinder, longitudinal split, 
N2  - Investigation of the stress state in a rotating ring Is one of the basic steps In studying the bursting mechanism In different rotating machine components and tolls, for example a grinding wheel. A critical survey of the state of the art In this field of research was given by Bandera C., M. Nikol Ich and A. Strozzi, 1993. In their paper, they compare the maximum circumferential stress which appears on the Inner side of the longitudinal cross section planes of the hollow cylinder, the stresses being determined using several different methods: curved beam theory, straight beam theory and finite element method (FEM). They found that the maximum circumferential stresses determined by the straight beam theory and FEM are almost the same, whereas the other methods give lower values of maximum circumferential stresses. Large differences among the maximum circumferential stresses occur near the inner radii. By the curved beam theory and FEM, the maximum circumferential stresses Increase for radii ration from 0.15 downwards but, using the other two methods the same stresses decrease at these radii ratia. Our contribution presents a mathematical approach to determine the function of the stress state in the longitudinal section planes of the hollow cylinder, using the Airy function. Special emphasis is laid on the need to meet the boundary conditions on the longitudinal cross section planes of the hollow cylinder.
UR  - https://www.sv-jme.eu/sl/article/stresses-in-hollow-rotating-cylinder-with-longitudinal-split/
Batista, Milan, AND Kosel, Franc.
"Stresses in Hollow Rotating Cylinder with Longitudinal Split" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 41 Number 1-2 (11 November 2017)

Avtorji

Inštitucije

  • Maritime and Trafic Collage, Piran, Slovenia
  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 41(1995)1-2, 19-28

Investigation of the stress state in a rotating ring Is one of the basic steps In studying the bursting mechanism In different rotating machine components and tolls, for example a grinding wheel. A critical survey of the state of the art In this field of research was given by Bandera C., M. Nikol Ich and A. Strozzi, 1993. In their paper, they compare the maximum circumferential stress which appears on the Inner side of the longitudinal cross section planes of the hollow cylinder, the stresses being determined using several different methods: curved beam theory, straight beam theory and finite element method (FEM). They found that the maximum circumferential stresses determined by the straight beam theory and FEM are almost the same, whereas the other methods give lower values of maximum circumferential stresses. Large differences among the maximum circumferential stresses occur near the inner radii. By the curved beam theory and FEM, the maximum circumferential stresses Increase for radii ration from 0.15 downwards but, using the other two methods the same stresses decrease at these radii ratia. Our contribution presents a mathematical approach to determine the function of the stress state in the longitudinal section planes of the hollow cylinder, using the Airy function. Special emphasis is laid on the need to meet the boundary conditions on the longitudinal cross section planes of the hollow cylinder.

hollow rotating cylinder; longitudinal split;