Test Certificate of Elements for Vehicle Prototype

1863 Ogledov
1133 Prenosov
Izvoz citacije: ABNT
KOSTANJEVEC, Andrej ;MALNARIČ, Vili ;JUREJEVČIČ, Tomaž ;FAJDIGA, Matija .
Test Certificate of Elements for Vehicle Prototype. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 45, n.12, p. 522-532, november 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/test-certificate-of-elements-for-vehicle-prototype/>. Date accessed: 04 oct. 2024. 
doi:http://dx.doi.org/.
Kostanjevec, A., Malnarič, V., Jurejevčič, T., & Fajdiga, M.
(1999).
Test Certificate of Elements for Vehicle Prototype.
Strojniški vestnik - Journal of Mechanical Engineering, 45(12), 522-532.
doi:http://dx.doi.org/
@article{.,
	author = {Andrej  Kostanjevec and Vili  Malnarič and Tomaž  Jurejevčič and Matija  Fajdiga},
	title = {Test Certificate of Elements for Vehicle Prototype},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {45},
	number = {12},
	year = {1999},
	keywords = {vehicle; chassis; strength calculations; homologation; },
	abstract = {For a vehicle to be registered for use in Slovenia it is necessary to obtain a motor vehicle approval document. In the case of manufacturing a unique prototype vehicle it is the task of the manufacturer to provide all the necessary certificates relating to the strength and/or functional suitability of the built-in elements. This paper presents strength calculations on the chassis elements of the Šinkovec MM vehicle. In order to obtain the data on possible loads acting on the wheels, a multi-mass dynamic model of the vehicle has been developed and on the basis of the simulation of roads under different driving conditions these loads were then calculated. They were then applied to elements of the front and rear suspension, and a computer supported strength analysis of the elements was made. The possibility of both instant and fatigue failure of the discussed elements was verified.},
	issn = {0039-2480},	pages = {522-532},	doi = {},
	url = {https://www.sv-jme.eu/sl/article/test-certificate-of-elements-for-vehicle-prototype/}
}
Kostanjevec, A.,Malnarič, V.,Jurejevčič, T.,Fajdiga, M.
1999 November 45. Test Certificate of Elements for Vehicle Prototype. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 45:12
%A Kostanjevec, Andrej 
%A Malnarič, Vili 
%A Jurejevčič, Tomaž 
%A Fajdiga, Matija 
%D 1999
%T Test Certificate of Elements for Vehicle Prototype
%B 1999
%9 vehicle; chassis; strength calculations; homologation; 
%! Test Certificate of Elements for Vehicle Prototype
%K vehicle; chassis; strength calculations; homologation; 
%X For a vehicle to be registered for use in Slovenia it is necessary to obtain a motor vehicle approval document. In the case of manufacturing a unique prototype vehicle it is the task of the manufacturer to provide all the necessary certificates relating to the strength and/or functional suitability of the built-in elements. This paper presents strength calculations on the chassis elements of the Šinkovec MM vehicle. In order to obtain the data on possible loads acting on the wheels, a multi-mass dynamic model of the vehicle has been developed and on the basis of the simulation of roads under different driving conditions these loads were then calculated. They were then applied to elements of the front and rear suspension, and a computer supported strength analysis of the elements was made. The possibility of both instant and fatigue failure of the discussed elements was verified.
%U https://www.sv-jme.eu/sl/article/test-certificate-of-elements-for-vehicle-prototype/
%0 Journal Article
%R 
%& 522
%P 11
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 45
%N 12
%@ 0039-2480
%8 2017-11-11
%7 2017-11-11
Kostanjevec, Andrej, Vili  Malnarič, Tomaž  Jurejevčič, & Matija  Fajdiga.
"Test Certificate of Elements for Vehicle Prototype." Strojniški vestnik - Journal of Mechanical Engineering [Online], 45.12 (1999): 522-532. Web.  04 Oct. 2024
TY  - JOUR
AU  - Kostanjevec, Andrej 
AU  - Malnarič, Vili 
AU  - Jurejevčič, Tomaž 
AU  - Fajdiga, Matija 
PY  - 1999
TI  - Test Certificate of Elements for Vehicle Prototype
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - vehicle; chassis; strength calculations; homologation; 
N2  - For a vehicle to be registered for use in Slovenia it is necessary to obtain a motor vehicle approval document. In the case of manufacturing a unique prototype vehicle it is the task of the manufacturer to provide all the necessary certificates relating to the strength and/or functional suitability of the built-in elements. This paper presents strength calculations on the chassis elements of the Šinkovec MM vehicle. In order to obtain the data on possible loads acting on the wheels, a multi-mass dynamic model of the vehicle has been developed and on the basis of the simulation of roads under different driving conditions these loads were then calculated. They were then applied to elements of the front and rear suspension, and a computer supported strength analysis of the elements was made. The possibility of both instant and fatigue failure of the discussed elements was verified.
UR  - https://www.sv-jme.eu/sl/article/test-certificate-of-elements-for-vehicle-prototype/
@article{{}{.},
	author = {Kostanjevec, A., Malnarič, V., Jurejevčič, T., Fajdiga, M.},
	title = {Test Certificate of Elements for Vehicle Prototype},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {45},
	number = {12},
	year = {1999},
	doi = {},
	url = {https://www.sv-jme.eu/sl/article/test-certificate-of-elements-for-vehicle-prototype/}
}
TY  - JOUR
AU  - Kostanjevec, Andrej 
AU  - Malnarič, Vili 
AU  - Jurejevčič, Tomaž 
AU  - Fajdiga, Matija 
PY  - 2017/11/11
TI  - Test Certificate of Elements for Vehicle Prototype
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 45, No 12 (1999): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - vehicle, chassis, strength calculations, homologation, 
N2  - For a vehicle to be registered for use in Slovenia it is necessary to obtain a motor vehicle approval document. In the case of manufacturing a unique prototype vehicle it is the task of the manufacturer to provide all the necessary certificates relating to the strength and/or functional suitability of the built-in elements. This paper presents strength calculations on the chassis elements of the Šinkovec MM vehicle. In order to obtain the data on possible loads acting on the wheels, a multi-mass dynamic model of the vehicle has been developed and on the basis of the simulation of roads under different driving conditions these loads were then calculated. They were then applied to elements of the front and rear suspension, and a computer supported strength analysis of the elements was made. The possibility of both instant and fatigue failure of the discussed elements was verified.
UR  - https://www.sv-jme.eu/sl/article/test-certificate-of-elements-for-vehicle-prototype/
Kostanjevec, Andrej, Malnarič, Vili, Jurejevčič, Tomaž, AND Fajdiga, Matija.
"Test Certificate of Elements for Vehicle Prototype" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 45 Number 12 (11 November 2017)

Avtorji

Inštitucije

  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia
  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia
  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia
  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 45(1999)12, 522-532
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

For a vehicle to be registered for use in Slovenia it is necessary to obtain a motor vehicle approval document. In the case of manufacturing a unique prototype vehicle it is the task of the manufacturer to provide all the necessary certificates relating to the strength and/or functional suitability of the built-in elements. This paper presents strength calculations on the chassis elements of the Šinkovec MM vehicle. In order to obtain the data on possible loads acting on the wheels, a multi-mass dynamic model of the vehicle has been developed and on the basis of the simulation of roads under different driving conditions these loads were then calculated. They were then applied to elements of the front and rear suspension, and a computer supported strength analysis of the elements was made. The possibility of both instant and fatigue failure of the discussed elements was verified.

vehicle; chassis; strength calculations; homologation;