Test Stand for Brake Pedal Tests

782 Ogledov
322 Prenosov
Izvoz citacije: ABNT
KERNC, Janko ;JUREJEVČIČ, Tomaž .
Test Stand for Brake Pedal Tests. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 45, n.12, p. 513-521, november 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/test-stand-for-brake-pedal-tests/>. Date accessed: 06 jun. 2020. 
doi:http://dx.doi.org/.
Kernc, J., & Jurejevčič, T.
(1999).
Test Stand for Brake Pedal Tests.
Strojniški vestnik - Journal of Mechanical Engineering, 45(12), 513-521.
doi:http://dx.doi.org/
@article{.,
	author = {Janko  Kernc and Tomaž  Jurejevčič},
	title = {Test Stand for Brake Pedal Tests},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {45},
	number = {12},
	year = {1999},
	keywords = {brake pedals; testing; mechanical measurements; virtual instruments; },
	abstract = {Testing for the purpose of development and/or serial product verification is a required part of the product industrialization at a development contractor company. Development testing should provide the data needed during the development, whereas the verification tests should prove to the customer, that the product satisfies all the necessary requirements. These procedures are the most common with vehicle manufacturers' contractors. This paper shows an example of a brake pedal verification test for an international vehicle manufacturer.},
	issn = {0039-2480},	pages = {513-521},	doi = {},
	url = {https://www.sv-jme.eu/sl/article/test-stand-for-brake-pedal-tests/}
}
Kernc, J.,Jurejevčič, T.
1999 November 45. Test Stand for Brake Pedal Tests. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 45:12
%A Kernc, Janko 
%A Jurejevčič, Tomaž 
%D 1999
%T Test Stand for Brake Pedal Tests
%B 1999
%9 brake pedals; testing; mechanical measurements; virtual instruments; 
%! Test Stand for Brake Pedal Tests
%K brake pedals; testing; mechanical measurements; virtual instruments; 
%X Testing for the purpose of development and/or serial product verification is a required part of the product industrialization at a development contractor company. Development testing should provide the data needed during the development, whereas the verification tests should prove to the customer, that the product satisfies all the necessary requirements. These procedures are the most common with vehicle manufacturers' contractors. This paper shows an example of a brake pedal verification test for an international vehicle manufacturer.
%U https://www.sv-jme.eu/sl/article/test-stand-for-brake-pedal-tests/
%0 Journal Article
%R 
%& 513
%P 9
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 45
%N 12
%@ 0039-2480
%8 2017-11-11
%7 2017-11-11
Kernc, Janko, & Tomaž  Jurejevčič.
"Test Stand for Brake Pedal Tests." Strojniški vestnik - Journal of Mechanical Engineering [Online], 45.12 (1999): 513-521. Web.  06 Jun. 2020
TY  - JOUR
AU  - Kernc, Janko 
AU  - Jurejevčič, Tomaž 
PY  - 1999
TI  - Test Stand for Brake Pedal Tests
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - brake pedals; testing; mechanical measurements; virtual instruments; 
N2  - Testing for the purpose of development and/or serial product verification is a required part of the product industrialization at a development contractor company. Development testing should provide the data needed during the development, whereas the verification tests should prove to the customer, that the product satisfies all the necessary requirements. These procedures are the most common with vehicle manufacturers' contractors. This paper shows an example of a brake pedal verification test for an international vehicle manufacturer.
UR  - https://www.sv-jme.eu/sl/article/test-stand-for-brake-pedal-tests/
@article{{}{.},
	author = {Kernc, J., Jurejevčič, T.},
	title = {Test Stand for Brake Pedal Tests},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {45},
	number = {12},
	year = {1999},
	doi = {},
	url = {https://www.sv-jme.eu/sl/article/test-stand-for-brake-pedal-tests/}
}
TY  - JOUR
AU  - Kernc, Janko 
AU  - Jurejevčič, Tomaž 
PY  - 2017/11/11
TI  - Test Stand for Brake Pedal Tests
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 45, No 12 (1999): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - brake pedals, testing, mechanical measurements, virtual instruments, 
N2  - Testing for the purpose of development and/or serial product verification is a required part of the product industrialization at a development contractor company. Development testing should provide the data needed during the development, whereas the verification tests should prove to the customer, that the product satisfies all the necessary requirements. These procedures are the most common with vehicle manufacturers' contractors. This paper shows an example of a brake pedal verification test for an international vehicle manufacturer.
UR  - https://www.sv-jme.eu/sl/article/test-stand-for-brake-pedal-tests/
Kernc, Janko, AND Jurejevčič, Tomaž.
"Test Stand for Brake Pedal Tests" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 45 Number 12 (11 November 2017)

Avtorji

Inštitucije

  • IRGO, Ljubljana, Slovenia
  • Donit Tesnit, Medvode, Slovenia

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 45(1999)12, 513-521

Testing for the purpose of development and/or serial product verification is a required part of the product industrialization at a development contractor company. Development testing should provide the data needed during the development, whereas the verification tests should prove to the customer, that the product satisfies all the necessary requirements. These procedures are the most common with vehicle manufacturers' contractors. This paper shows an example of a brake pedal verification test for an international vehicle manufacturer.

brake pedals; testing; mechanical measurements; virtual instruments;