The Application of Water-Jet Technology for Incremental Sheet-Metal Forming

1726 Ogledov
1090 Prenosov
Izvoz citacije: ABNT
JUNKAR, Mihael ;JURIŠEVIČ, Boštjan ;HEINIGER, Kurt C..
The Application of Water-Jet Technology for Incremental Sheet-Metal Forming. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 50, n.12, p. 613-622, november 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/the-application-of-water-jet-technology-for-incremental-sheetmetal-forming/>. Date accessed: 28 mar. 2024. 
doi:http://dx.doi.org/.
Junkar, M., Juriševič, B., & Heiniger, K.
(2004).
The Application of Water-Jet Technology for Incremental Sheet-Metal Forming.
Strojniški vestnik - Journal of Mechanical Engineering, 50(12), 613-622.
doi:http://dx.doi.org/
@article{.,
	author = {Mihael  Junkar and Boštjan  Juriševič and Kurt C. Heiniger},
	title = {The Application of Water-Jet Technology for Incremental Sheet-Metal Forming},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {50},
	number = {12},
	year = {2004},
	keywords = {sheet-metal forming; nonconventional processes; fast prototyping; high speed water jet; },
	abstract = {High-speed jetting technology has developed quickly over the past few decades. Since its first introduction in the early 1970s the number of applications has rapidly increased. Of the high-speed jet-based processes, cutting with an abrasive water jet (AWJ) is the most common. In this process, hard abrasive particles, which are accelerated by a high-speed water jet (WJ), can erode practically any known material. On the other hand, a plain WJ is used mostly for cutting softer materials, cleaning, surface preparation, applications in medicine and food processing. Recently, WJs have been used in forming, mostly as a tool for surface peening, but some research has shown great potential for a WJ as a tool for incremental sheet-metal forming (ISMF). In this study we analyzed the possibility to apply a high-speed WJ as a tool for ISMF. The importance of process parameters such as water pressure and volume flow were determined, and the most appropriate water-nozzle geometry was defined as well. A case study is included, where a simple geometry was incrementally formed by a WJ in 0.5-mm-thick aluminum-alloy plate. Compared to ISMF with a rigid tool, the proposed technology is more environmentally friendly, since no lubrication is required, and from our first investigation it seems that the formability is increased as well.},
	issn = {0039-2480},	pages = {613-622},	doi = {},
	url = {https://www.sv-jme.eu/sl/article/the-application-of-water-jet-technology-for-incremental-sheetmetal-forming/}
}
Junkar, M.,Juriševič, B.,Heiniger, K.
2004 November 50. The Application of Water-Jet Technology for Incremental Sheet-Metal Forming. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 50:12
%A Junkar, Mihael 
%A Juriševič, Boštjan 
%A Heiniger, Kurt C.
%D 2004
%T The Application of Water-Jet Technology for Incremental Sheet-Metal Forming
%B 2004
%9 sheet-metal forming; nonconventional processes; fast prototyping; high speed water jet; 
%! The Application of Water-Jet Technology for Incremental Sheet-Metal Forming
%K sheet-metal forming; nonconventional processes; fast prototyping; high speed water jet; 
%X High-speed jetting technology has developed quickly over the past few decades. Since its first introduction in the early 1970s the number of applications has rapidly increased. Of the high-speed jet-based processes, cutting with an abrasive water jet (AWJ) is the most common. In this process, hard abrasive particles, which are accelerated by a high-speed water jet (WJ), can erode practically any known material. On the other hand, a plain WJ is used mostly for cutting softer materials, cleaning, surface preparation, applications in medicine and food processing. Recently, WJs have been used in forming, mostly as a tool for surface peening, but some research has shown great potential for a WJ as a tool for incremental sheet-metal forming (ISMF). In this study we analyzed the possibility to apply a high-speed WJ as a tool for ISMF. The importance of process parameters such as water pressure and volume flow were determined, and the most appropriate water-nozzle geometry was defined as well. A case study is included, where a simple geometry was incrementally formed by a WJ in 0.5-mm-thick aluminum-alloy plate. Compared to ISMF with a rigid tool, the proposed technology is more environmentally friendly, since no lubrication is required, and from our first investigation it seems that the formability is increased as well.
%U https://www.sv-jme.eu/sl/article/the-application-of-water-jet-technology-for-incremental-sheetmetal-forming/
%0 Journal Article
%R 
%& 613
%P 10
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 50
%N 12
%@ 0039-2480
%8 2017-11-11
%7 2017-11-11
Junkar, Mihael, Boštjan  Juriševič, & Kurt C. Heiniger.
"The Application of Water-Jet Technology for Incremental Sheet-Metal Forming." Strojniški vestnik - Journal of Mechanical Engineering [Online], 50.12 (2004): 613-622. Web.  28 Mar. 2024
TY  - JOUR
AU  - Junkar, Mihael 
AU  - Juriševič, Boštjan 
AU  - Heiniger, Kurt C.
PY  - 2004
TI  - The Application of Water-Jet Technology for Incremental Sheet-Metal Forming
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - sheet-metal forming; nonconventional processes; fast prototyping; high speed water jet; 
N2  - High-speed jetting technology has developed quickly over the past few decades. Since its first introduction in the early 1970s the number of applications has rapidly increased. Of the high-speed jet-based processes, cutting with an abrasive water jet (AWJ) is the most common. In this process, hard abrasive particles, which are accelerated by a high-speed water jet (WJ), can erode practically any known material. On the other hand, a plain WJ is used mostly for cutting softer materials, cleaning, surface preparation, applications in medicine and food processing. Recently, WJs have been used in forming, mostly as a tool for surface peening, but some research has shown great potential for a WJ as a tool for incremental sheet-metal forming (ISMF). In this study we analyzed the possibility to apply a high-speed WJ as a tool for ISMF. The importance of process parameters such as water pressure and volume flow were determined, and the most appropriate water-nozzle geometry was defined as well. A case study is included, where a simple geometry was incrementally formed by a WJ in 0.5-mm-thick aluminum-alloy plate. Compared to ISMF with a rigid tool, the proposed technology is more environmentally friendly, since no lubrication is required, and from our first investigation it seems that the formability is increased as well.
UR  - https://www.sv-jme.eu/sl/article/the-application-of-water-jet-technology-for-incremental-sheetmetal-forming/
@article{{}{.},
	author = {Junkar, M., Juriševič, B., Heiniger, K.},
	title = {The Application of Water-Jet Technology for Incremental Sheet-Metal Forming},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {50},
	number = {12},
	year = {2004},
	doi = {},
	url = {https://www.sv-jme.eu/sl/article/the-application-of-water-jet-technology-for-incremental-sheetmetal-forming/}
}
TY  - JOUR
AU  - Junkar, Mihael 
AU  - Juriševič, Boštjan 
AU  - Heiniger, Kurt C.
PY  - 2017/11/11
TI  - The Application of Water-Jet Technology for Incremental Sheet-Metal Forming
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 50, No 12 (2004): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - sheet-metal forming, nonconventional processes, fast prototyping, high speed water jet, 
N2  - High-speed jetting technology has developed quickly over the past few decades. Since its first introduction in the early 1970s the number of applications has rapidly increased. Of the high-speed jet-based processes, cutting with an abrasive water jet (AWJ) is the most common. In this process, hard abrasive particles, which are accelerated by a high-speed water jet (WJ), can erode practically any known material. On the other hand, a plain WJ is used mostly for cutting softer materials, cleaning, surface preparation, applications in medicine and food processing. Recently, WJs have been used in forming, mostly as a tool for surface peening, but some research has shown great potential for a WJ as a tool for incremental sheet-metal forming (ISMF). In this study we analyzed the possibility to apply a high-speed WJ as a tool for ISMF. The importance of process parameters such as water pressure and volume flow were determined, and the most appropriate water-nozzle geometry was defined as well. A case study is included, where a simple geometry was incrementally formed by a WJ in 0.5-mm-thick aluminum-alloy plate. Compared to ISMF with a rigid tool, the proposed technology is more environmentally friendly, since no lubrication is required, and from our first investigation it seems that the formability is increased as well.
UR  - https://www.sv-jme.eu/sl/article/the-application-of-water-jet-technology-for-incremental-sheetmetal-forming/
Junkar, Mihael, Juriševič, Boštjan, AND Heiniger, Kurt.
"The Application of Water-Jet Technology for Incremental Sheet-Metal Forming" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 50 Number 12 (11 November 2017)

Avtorji

Inštitucije

  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia
  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia
  • University of Applied Sciences, Swiss Competence Centre for Water Jet Technology, Switzerland

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 50(2004)12, 613-622
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

High-speed jetting technology has developed quickly over the past few decades. Since its first introduction in the early 1970s the number of applications has rapidly increased. Of the high-speed jet-based processes, cutting with an abrasive water jet (AWJ) is the most common. In this process, hard abrasive particles, which are accelerated by a high-speed water jet (WJ), can erode practically any known material. On the other hand, a plain WJ is used mostly for cutting softer materials, cleaning, surface preparation, applications in medicine and food processing. Recently, WJs have been used in forming, mostly as a tool for surface peening, but some research has shown great potential for a WJ as a tool for incremental sheet-metal forming (ISMF). In this study we analyzed the possibility to apply a high-speed WJ as a tool for ISMF. The importance of process parameters such as water pressure and volume flow were determined, and the most appropriate water-nozzle geometry was defined as well. A case study is included, where a simple geometry was incrementally formed by a WJ in 0.5-mm-thick aluminum-alloy plate. Compared to ISMF with a rigid tool, the proposed technology is more environmentally friendly, since no lubrication is required, and from our first investigation it seems that the formability is increased as well.

sheet-metal forming; nonconventional processes; fast prototyping; high speed water jet;