The Comparison between Two High-Temperature Heat-Pumps for the Production of Sanitary Water

1565 Ogledov
1128 Prenosov
Izvoz citacije: ABNT
IVANOVSKI, Igor ;GORIČANEC, Darko ;SALAMUNIĆ, Julijan Jan;ŽAGAR, Tina .
The Comparison between Two High-Temperature Heat-Pumps for the Production of Sanitary Water. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 64, n.7-8, p. 437-442, july 2018. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/the-comparison-between-two-high-temperature-heat-pumps-for-the-production-of-sanitary-water/>. Date accessed: 21 oct. 2020. 
doi:http://dx.doi.org/10.5545/sv-jme.2017.5082.
Ivanovski, I., Goričanec, D., Salamunić, J., & Žagar, T.
(2018).
The Comparison between Two High-Temperature Heat-Pumps for the Production of Sanitary Water.
Strojniški vestnik - Journal of Mechanical Engineering, 64(7-8), 437-442.
doi:http://dx.doi.org/10.5545/sv-jme.2017.5082
@article{sv-jmesv-jme.2017.5082,
	author = {Igor  Ivanovski and Darko  Goričanec and Julijan Jan Salamunić and Tina  Žagar},
	title = {The Comparison between Two High-Temperature Heat-Pumps for the Production of Sanitary Water},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {64},
	number = {7-8},
	year = {2018},
	keywords = {heat-pump, sanitary water, coefficient of performance},
	abstract = {High-temperature heat-pumps are devices that exploit low-temperature heat sources for the production of hot water at high temperatures. This paper presents a comparison between two high temperature heat-pumps for the production of hot sanitary water of temperatures between 65 °C and 85 °C. A high-temperature heat-pump that uses ammonia as a refrigerant and transcritical heat-pump that uses carbon dioxide as a refrigerant were compared in terms of coefficient of performance. Theoretical calculations were based on the REFPROP property method within Aspen Plus software. The simulations showed that the ammonia high-temperature heat-pump outperforms the transcritical heat-pump in terms of coefficient of performance within the evaporation temperature range between –20 °C and 20 °C.},
	issn = {0039-2480},	pages = {437-442},	doi = {10.5545/sv-jme.2017.5082},
	url = {https://www.sv-jme.eu/sl/article/the-comparison-between-two-high-temperature-heat-pumps-for-the-production-of-sanitary-water/}
}
Ivanovski, I.,Goričanec, D.,Salamunić, J.,Žagar, T.
2018 July 64. The Comparison between Two High-Temperature Heat-Pumps for the Production of Sanitary Water. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 64:7-8
%A Ivanovski, Igor 
%A Goričanec, Darko 
%A Salamunić, Julijan Jan
%A Žagar, Tina 
%D 2018
%T The Comparison between Two High-Temperature Heat-Pumps for the Production of Sanitary Water
%B 2018
%9 heat-pump, sanitary water, coefficient of performance
%! The Comparison between Two High-Temperature Heat-Pumps for the Production of Sanitary Water
%K heat-pump, sanitary water, coefficient of performance
%X High-temperature heat-pumps are devices that exploit low-temperature heat sources for the production of hot water at high temperatures. This paper presents a comparison between two high temperature heat-pumps for the production of hot sanitary water of temperatures between 65 °C and 85 °C. A high-temperature heat-pump that uses ammonia as a refrigerant and transcritical heat-pump that uses carbon dioxide as a refrigerant were compared in terms of coefficient of performance. Theoretical calculations were based on the REFPROP property method within Aspen Plus software. The simulations showed that the ammonia high-temperature heat-pump outperforms the transcritical heat-pump in terms of coefficient of performance within the evaporation temperature range between –20 °C and 20 °C.
%U https://www.sv-jme.eu/sl/article/the-comparison-between-two-high-temperature-heat-pumps-for-the-production-of-sanitary-water/
%0 Journal Article
%R 10.5545/sv-jme.2017.5082
%& 437
%P 6
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 64
%N 7-8
%@ 0039-2480
%8 2018-07-12
%7 2018-07-12
Ivanovski, Igor, Darko  Goričanec, Julijan Jan Salamunić, & Tina  Žagar.
"The Comparison between Two High-Temperature Heat-Pumps for the Production of Sanitary Water." Strojniški vestnik - Journal of Mechanical Engineering [Online], 64.7-8 (2018): 437-442. Web.  21 Oct. 2020
TY  - JOUR
AU  - Ivanovski, Igor 
AU  - Goričanec, Darko 
AU  - Salamunić, Julijan Jan
AU  - Žagar, Tina 
PY  - 2018
TI  - The Comparison between Two High-Temperature Heat-Pumps for the Production of Sanitary Water
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2017.5082
KW  - heat-pump, sanitary water, coefficient of performance
N2  - High-temperature heat-pumps are devices that exploit low-temperature heat sources for the production of hot water at high temperatures. This paper presents a comparison between two high temperature heat-pumps for the production of hot sanitary water of temperatures between 65 °C and 85 °C. A high-temperature heat-pump that uses ammonia as a refrigerant and transcritical heat-pump that uses carbon dioxide as a refrigerant were compared in terms of coefficient of performance. Theoretical calculations were based on the REFPROP property method within Aspen Plus software. The simulations showed that the ammonia high-temperature heat-pump outperforms the transcritical heat-pump in terms of coefficient of performance within the evaporation temperature range between –20 °C and 20 °C.
UR  - https://www.sv-jme.eu/sl/article/the-comparison-between-two-high-temperature-heat-pumps-for-the-production-of-sanitary-water/
@article{{sv-jme}{sv-jme.2017.5082},
	author = {Ivanovski, I., Goričanec, D., Salamunić, J., Žagar, T.},
	title = {The Comparison between Two High-Temperature Heat-Pumps for the Production of Sanitary Water},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {64},
	number = {7-8},
	year = {2018},
	doi = {10.5545/sv-jme.2017.5082},
	url = {https://www.sv-jme.eu/sl/article/the-comparison-between-two-high-temperature-heat-pumps-for-the-production-of-sanitary-water/}
}
TY  - JOUR
AU  - Ivanovski, Igor 
AU  - Goričanec, Darko 
AU  - Salamunić, Julijan Jan
AU  - Žagar, Tina 
PY  - 2018/07/12
TI  - The Comparison between Two High-Temperature Heat-Pumps for the Production of Sanitary Water
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 64, No 7-8 (2018): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2017.5082
KW  - heat-pump, sanitary water, coefficient of performance
N2  - High-temperature heat-pumps are devices that exploit low-temperature heat sources for the production of hot water at high temperatures. This paper presents a comparison between two high temperature heat-pumps for the production of hot sanitary water of temperatures between 65 °C and 85 °C. A high-temperature heat-pump that uses ammonia as a refrigerant and transcritical heat-pump that uses carbon dioxide as a refrigerant were compared in terms of coefficient of performance. Theoretical calculations were based on the REFPROP property method within Aspen Plus software. The simulations showed that the ammonia high-temperature heat-pump outperforms the transcritical heat-pump in terms of coefficient of performance within the evaporation temperature range between –20 °C and 20 °C.
UR  - https://www.sv-jme.eu/sl/article/the-comparison-between-two-high-temperature-heat-pumps-for-the-production-of-sanitary-water/
Ivanovski, Igor, Goričanec, Darko, Salamunić, Julijan, AND Žagar, Tina.
"The Comparison between Two High-Temperature Heat-Pumps for the Production of Sanitary Water" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 64 Number 7-8 (12 July 2018)

Avtorji

Inštitucije

  • IVD Maribor, Slovenia 1
  • University of Maribor, Faculty of Chemistry and Chemical Engineering, Slovenia 2
  • Inter oil, d.o.o., Slovenia 3
  • Ministry of Economic Development and Technology, Slovenia 4

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 64(2018)7-8, 437-442

https://doi.org/10.5545/sv-jme.2017.5082

High-temperature heat-pumps are devices that exploit low-temperature heat sources for the production of hot water at high temperatures. This paper presents a comparison between two high temperature heat-pumps for the production of hot sanitary water of temperatures between 65 °C and 85 °C. A high-temperature heat-pump that uses ammonia as a refrigerant and transcritical heat-pump that uses carbon dioxide as a refrigerant were compared in terms of coefficient of performance. Theoretical calculations were based on the REFPROP property method within Aspen Plus software. The simulations showed that the ammonia high-temperature heat-pump outperforms the transcritical heat-pump in terms of coefficient of performance within the evaporation temperature range between –20 °C and 20 °C.

heat-pump, sanitary water, coefficient of performance