The Effect of Vibrational Treatment During and After Welding on the Mechanical Properties of a Transferred Ionized Molten Energy Weld

1827 Ogledov
1247 Prenosov
Izvoz citacije: ABNT
PUCKO, Bogdan .
The Effect of Vibrational Treatment During and After Welding on the Mechanical Properties of a Transferred Ionized Molten Energy Weld. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 46, n.11-12, p. 762-769, july 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/the-effect-of-vibrational-treatment-during-and-after-welding-on-the-mechanical-properties-of-a-transferred-ionized-molten-energy-weld/>. Date accessed: 07 oct. 2024. 
doi:http://dx.doi.org/.
Pucko, B.
(2000).
The Effect of Vibrational Treatment During and After Welding on the Mechanical Properties of a Transferred Ionized Molten Energy Weld.
Strojniški vestnik - Journal of Mechanical Engineering, 46(11-12), 762-769.
doi:http://dx.doi.org/
@article{.,
	author = {Bogdan  Pucko},
	title = {The Effect of Vibrational Treatment During and After Welding on the Mechanical Properties of a Transferred Ionized Molten Energy Weld},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {46},
	number = {11-12},
	year = {2000},
	keywords = {VSR; vibrational stress relief; TIME process; },
	abstract = {The vibrational stress relief (VSR) technique has been shown to reduce the internal residual stresses caused by welding. By lowering or redistributing the stress it is possible to alter the mechanical properties of the weld joint. The aim of this study was to determine the effect of vibration on the properties of multilayer weld specimens which were welded and vibrated under various conditions. Specimens which were stress annealed, vibrated after and during welding were compared with specimen in the as-welded condition. Each specimen was welded using the T.I.M.E. (transferred ionized molten energy) process. Using weld-procedure-specification methods and the fracture-toughness method we established differences in the properties of the different specimens. Properties were also assessed using the tensile stress test, the Charpy V-notch test, the fracture mechanics test and hardness measurements. Measurements were made primarily in the weld metal. The results show an effect of vibration after, and during, welding on the Charpy and fracture toughness, the other mechanical properties were not seriously affected. Stress annealing, in contrast, lowers the toughness and increases the hardness in the heat-affected zone (HAZ) of the weld.},
	issn = {0039-2480},	pages = {762-769},	doi = {},
	url = {https://www.sv-jme.eu/sl/article/the-effect-of-vibrational-treatment-during-and-after-welding-on-the-mechanical-properties-of-a-transferred-ionized-molten-energy-weld/}
}
Pucko, B.
2000 July 46. The Effect of Vibrational Treatment During and After Welding on the Mechanical Properties of a Transferred Ionized Molten Energy Weld. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 46:11-12
%A Pucko, Bogdan 
%D 2000
%T The Effect of Vibrational Treatment During and After Welding on the Mechanical Properties of a Transferred Ionized Molten Energy Weld
%B 2000
%9 VSR; vibrational stress relief; TIME process; 
%! The Effect of Vibrational Treatment During and After Welding on the Mechanical Properties of a Transferred Ionized Molten Energy Weld
%K VSR; vibrational stress relief; TIME process; 
%X The vibrational stress relief (VSR) technique has been shown to reduce the internal residual stresses caused by welding. By lowering or redistributing the stress it is possible to alter the mechanical properties of the weld joint. The aim of this study was to determine the effect of vibration on the properties of multilayer weld specimens which were welded and vibrated under various conditions. Specimens which were stress annealed, vibrated after and during welding were compared with specimen in the as-welded condition. Each specimen was welded using the T.I.M.E. (transferred ionized molten energy) process. Using weld-procedure-specification methods and the fracture-toughness method we established differences in the properties of the different specimens. Properties were also assessed using the tensile stress test, the Charpy V-notch test, the fracture mechanics test and hardness measurements. Measurements were made primarily in the weld metal. The results show an effect of vibration after, and during, welding on the Charpy and fracture toughness, the other mechanical properties were not seriously affected. Stress annealing, in contrast, lowers the toughness and increases the hardness in the heat-affected zone (HAZ) of the weld.
%U https://www.sv-jme.eu/sl/article/the-effect-of-vibrational-treatment-during-and-after-welding-on-the-mechanical-properties-of-a-transferred-ionized-molten-energy-weld/
%0 Journal Article
%R 
%& 762
%P 8
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 46
%N 11-12
%@ 0039-2480
%8 2017-07-07
%7 2017-07-07
Pucko, Bogdan.
"The Effect of Vibrational Treatment During and After Welding on the Mechanical Properties of a Transferred Ionized Molten Energy Weld." Strojniški vestnik - Journal of Mechanical Engineering [Online], 46.11-12 (2000): 762-769. Web.  07 Oct. 2024
TY  - JOUR
AU  - Pucko, Bogdan 
PY  - 2000
TI  - The Effect of Vibrational Treatment During and After Welding on the Mechanical Properties of a Transferred Ionized Molten Energy Weld
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - VSR; vibrational stress relief; TIME process; 
N2  - The vibrational stress relief (VSR) technique has been shown to reduce the internal residual stresses caused by welding. By lowering or redistributing the stress it is possible to alter the mechanical properties of the weld joint. The aim of this study was to determine the effect of vibration on the properties of multilayer weld specimens which were welded and vibrated under various conditions. Specimens which were stress annealed, vibrated after and during welding were compared with specimen in the as-welded condition. Each specimen was welded using the T.I.M.E. (transferred ionized molten energy) process. Using weld-procedure-specification methods and the fracture-toughness method we established differences in the properties of the different specimens. Properties were also assessed using the tensile stress test, the Charpy V-notch test, the fracture mechanics test and hardness measurements. Measurements were made primarily in the weld metal. The results show an effect of vibration after, and during, welding on the Charpy and fracture toughness, the other mechanical properties were not seriously affected. Stress annealing, in contrast, lowers the toughness and increases the hardness in the heat-affected zone (HAZ) of the weld.
UR  - https://www.sv-jme.eu/sl/article/the-effect-of-vibrational-treatment-during-and-after-welding-on-the-mechanical-properties-of-a-transferred-ionized-molten-energy-weld/
@article{{}{.},
	author = {Pucko, B.},
	title = {The Effect of Vibrational Treatment During and After Welding on the Mechanical Properties of a Transferred Ionized Molten Energy Weld},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {46},
	number = {11-12},
	year = {2000},
	doi = {},
	url = {https://www.sv-jme.eu/sl/article/the-effect-of-vibrational-treatment-during-and-after-welding-on-the-mechanical-properties-of-a-transferred-ionized-molten-energy-weld/}
}
TY  - JOUR
AU  - Pucko, Bogdan 
PY  - 2017/07/07
TI  - The Effect of Vibrational Treatment During and After Welding on the Mechanical Properties of a Transferred Ionized Molten Energy Weld
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 46, No 11-12 (2000): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - VSR, vibrational stress relief, TIME process, 
N2  - The vibrational stress relief (VSR) technique has been shown to reduce the internal residual stresses caused by welding. By lowering or redistributing the stress it is possible to alter the mechanical properties of the weld joint. The aim of this study was to determine the effect of vibration on the properties of multilayer weld specimens which were welded and vibrated under various conditions. Specimens which were stress annealed, vibrated after and during welding were compared with specimen in the as-welded condition. Each specimen was welded using the T.I.M.E. (transferred ionized molten energy) process. Using weld-procedure-specification methods and the fracture-toughness method we established differences in the properties of the different specimens. Properties were also assessed using the tensile stress test, the Charpy V-notch test, the fracture mechanics test and hardness measurements. Measurements were made primarily in the weld metal. The results show an effect of vibration after, and during, welding on the Charpy and fracture toughness, the other mechanical properties were not seriously affected. Stress annealing, in contrast, lowers the toughness and increases the hardness in the heat-affected zone (HAZ) of the weld.
UR  - https://www.sv-jme.eu/sl/article/the-effect-of-vibrational-treatment-during-and-after-welding-on-the-mechanical-properties-of-a-transferred-ionized-molten-energy-weld/
Pucko, Bogdan"The Effect of Vibrational Treatment During and After Welding on the Mechanical Properties of a Transferred Ionized Molten Energy Weld" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 46 Number 11-12 (07 July 2017)

Avtorji

Inštitucije

  • University of Maribor, Faculty of Mechanical Engineering, Slovenia

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 46(2000)11-12, 762-769
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

The vibrational stress relief (VSR) technique has been shown to reduce the internal residual stresses caused by welding. By lowering or redistributing the stress it is possible to alter the mechanical properties of the weld joint. The aim of this study was to determine the effect of vibration on the properties of multilayer weld specimens which were welded and vibrated under various conditions. Specimens which were stress annealed, vibrated after and during welding were compared with specimen in the as-welded condition. Each specimen was welded using the T.I.M.E. (transferred ionized molten energy) process. Using weld-procedure-specification methods and the fracture-toughness method we established differences in the properties of the different specimens. Properties were also assessed using the tensile stress test, the Charpy V-notch test, the fracture mechanics test and hardness measurements. Measurements were made primarily in the weld metal. The results show an effect of vibration after, and during, welding on the Charpy and fracture toughness, the other mechanical properties were not seriously affected. Stress annealing, in contrast, lowers the toughness and increases the hardness in the heat-affected zone (HAZ) of the weld.

VSR; vibrational stress relief; TIME process;