The Effects of Blade Angle on Blade Stresses During Cutting of Different Kinds of Paper Materials

1007 Ogledov
4018 Prenosov
Izvoz citacije: ABNT
KURT, Abdullah ;KOSE, Erdogan ;SAHINBASKAN, Turkun .
The Effects of Blade Angle on Blade Stresses During Cutting of Different Kinds of Paper Materials. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 55, n.10, p. 633-640, august 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/the-effects-of-blade-angle-on-blade-stresses-during-cutting-of-different-kinds-of-paper-materials/>. Date accessed: 17 sep. 2021. 
doi:http://dx.doi.org/.
Kurt, A., Kose, E., & Sahinbaskan, T.
(2009).
The Effects of Blade Angle on Blade Stresses During Cutting of Different Kinds of Paper Materials.
Strojniški vestnik - Journal of Mechanical Engineering, 55(10), 633-640.
doi:http://dx.doi.org/
@article{.,
	author = {Abdullah  Kurt and Erdogan  Kose and Turkun  Sahinbaskan},
	title = {The Effects of Blade Angle on Blade Stresses During Cutting of Different Kinds of Paper Materials},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {55},
	number = {10},
	year = {2009},
	keywords = {paper; blade; stress; ANSYS; },
	abstract = {In the printing sector knives (blades) are used during pre-printing, printing and post-printing. Therefore, paper type, blade angles, the sharpness of blades and applied pressure are all important factors in terms of cutting quality. In this study, during the cutting of different kinds of paper material, the effects of blade angle on blade stresses has been investigated. Using paper pulp I, paper pulp II, coated paper and Bristol paper various analyses have been made. In the analyses, according to changes to blade angles of 20, 22, 24, 26, 28 and 30°, changes have been observed in maximum principal stress, S1, minimum principal stress, S3 and von Mises stresses, SEQV. In conclusion; since Von Mises stresses and especially max. compressive stresses (min. principal stress, S3) occurred at the lowest level for paper pulp I, paper pulp II, coated paper and Bristol papers, it has been decided that for increased durability of the knife the critical blade angle in terms of abrasion/breakage of the blade should be 28 degrees rather than the more widely used angle of 24°. A blade angle below 22 degrees is not advised.},
	issn = {0039-2480},	pages = {633-640},	doi = {},
	url = {https://www.sv-jme.eu/sl/article/the-effects-of-blade-angle-on-blade-stresses-during-cutting-of-different-kinds-of-paper-materials/}
}
Kurt, A.,Kose, E.,Sahinbaskan, T.
2009 August 55. The Effects of Blade Angle on Blade Stresses During Cutting of Different Kinds of Paper Materials. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 55:10
%A Kurt, Abdullah 
%A Kose, Erdogan 
%A Sahinbaskan, Turkun 
%D 2009
%T The Effects of Blade Angle on Blade Stresses During Cutting of Different Kinds of Paper Materials
%B 2009
%9 paper; blade; stress; ANSYS; 
%! The Effects of Blade Angle on Blade Stresses During Cutting of Different Kinds of Paper Materials
%K paper; blade; stress; ANSYS; 
%X In the printing sector knives (blades) are used during pre-printing, printing and post-printing. Therefore, paper type, blade angles, the sharpness of blades and applied pressure are all important factors in terms of cutting quality. In this study, during the cutting of different kinds of paper material, the effects of blade angle on blade stresses has been investigated. Using paper pulp I, paper pulp II, coated paper and Bristol paper various analyses have been made. In the analyses, according to changes to blade angles of 20, 22, 24, 26, 28 and 30°, changes have been observed in maximum principal stress, S1, minimum principal stress, S3 and von Mises stresses, SEQV. In conclusion; since Von Mises stresses and especially max. compressive stresses (min. principal stress, S3) occurred at the lowest level for paper pulp I, paper pulp II, coated paper and Bristol papers, it has been decided that for increased durability of the knife the critical blade angle in terms of abrasion/breakage of the blade should be 28 degrees rather than the more widely used angle of 24°. A blade angle below 22 degrees is not advised.
%U https://www.sv-jme.eu/sl/article/the-effects-of-blade-angle-on-blade-stresses-during-cutting-of-different-kinds-of-paper-materials/
%0 Journal Article
%R 
%& 633
%P 8
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 55
%N 10
%@ 0039-2480
%8 2017-08-21
%7 2017-08-21
Kurt, Abdullah, Erdogan  Kose, & Turkun  Sahinbaskan.
"The Effects of Blade Angle on Blade Stresses During Cutting of Different Kinds of Paper Materials." Strojniški vestnik - Journal of Mechanical Engineering [Online], 55.10 (2009): 633-640. Web.  17 Sep. 2021
TY  - JOUR
AU  - Kurt, Abdullah 
AU  - Kose, Erdogan 
AU  - Sahinbaskan, Turkun 
PY  - 2009
TI  - The Effects of Blade Angle on Blade Stresses During Cutting of Different Kinds of Paper Materials
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - paper; blade; stress; ANSYS; 
N2  - In the printing sector knives (blades) are used during pre-printing, printing and post-printing. Therefore, paper type, blade angles, the sharpness of blades and applied pressure are all important factors in terms of cutting quality. In this study, during the cutting of different kinds of paper material, the effects of blade angle on blade stresses has been investigated. Using paper pulp I, paper pulp II, coated paper and Bristol paper various analyses have been made. In the analyses, according to changes to blade angles of 20, 22, 24, 26, 28 and 30°, changes have been observed in maximum principal stress, S1, minimum principal stress, S3 and von Mises stresses, SEQV. In conclusion; since Von Mises stresses and especially max. compressive stresses (min. principal stress, S3) occurred at the lowest level for paper pulp I, paper pulp II, coated paper and Bristol papers, it has been decided that for increased durability of the knife the critical blade angle in terms of abrasion/breakage of the blade should be 28 degrees rather than the more widely used angle of 24°. A blade angle below 22 degrees is not advised.
UR  - https://www.sv-jme.eu/sl/article/the-effects-of-blade-angle-on-blade-stresses-during-cutting-of-different-kinds-of-paper-materials/
@article{{}{.},
	author = {Kurt, A., Kose, E., Sahinbaskan, T.},
	title = {The Effects of Blade Angle on Blade Stresses During Cutting of Different Kinds of Paper Materials},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {55},
	number = {10},
	year = {2009},
	doi = {},
	url = {https://www.sv-jme.eu/sl/article/the-effects-of-blade-angle-on-blade-stresses-during-cutting-of-different-kinds-of-paper-materials/}
}
TY  - JOUR
AU  - Kurt, Abdullah 
AU  - Kose, Erdogan 
AU  - Sahinbaskan, Turkun 
PY  - 2017/08/21
TI  - The Effects of Blade Angle on Blade Stresses During Cutting of Different Kinds of Paper Materials
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 55, No 10 (2009): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - paper, blade, stress, ANSYS, 
N2  - In the printing sector knives (blades) are used during pre-printing, printing and post-printing. Therefore, paper type, blade angles, the sharpness of blades and applied pressure are all important factors in terms of cutting quality. In this study, during the cutting of different kinds of paper material, the effects of blade angle on blade stresses has been investigated. Using paper pulp I, paper pulp II, coated paper and Bristol paper various analyses have been made. In the analyses, according to changes to blade angles of 20, 22, 24, 26, 28 and 30°, changes have been observed in maximum principal stress, S1, minimum principal stress, S3 and von Mises stresses, SEQV. In conclusion; since Von Mises stresses and especially max. compressive stresses (min. principal stress, S3) occurred at the lowest level for paper pulp I, paper pulp II, coated paper and Bristol papers, it has been decided that for increased durability of the knife the critical blade angle in terms of abrasion/breakage of the blade should be 28 degrees rather than the more widely used angle of 24°. A blade angle below 22 degrees is not advised.
UR  - https://www.sv-jme.eu/sl/article/the-effects-of-blade-angle-on-blade-stresses-during-cutting-of-different-kinds-of-paper-materials/
Kurt, Abdullah, Kose, Erdogan, AND Sahinbaskan, Turkun.
"The Effects of Blade Angle on Blade Stresses During Cutting of Different Kinds of Paper Materials" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 55 Number 10 (21 August 2017)

Avtorji

Inštitucije

  • Gazi University, Technical Education Faculty, Mechanical Department, Turkey
  • Gazi University, Technical Education Faculty, Printing Department, Turkey
  • Marmara University, Technical Education Faculty, Printing Department, Turkey

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 55(2009)10, 633-640

In the printing sector knives (blades) are used during pre-printing, printing and post-printing. Therefore, paper type, blade angles, the sharpness of blades and applied pressure are all important factors in terms of cutting quality. In this study, during the cutting of different kinds of paper material, the effects of blade angle on blade stresses has been investigated. Using paper pulp I, paper pulp II, coated paper and Bristol paper various analyses have been made. In the analyses, according to changes to blade angles of 20, 22, 24, 26, 28 and 30°, changes have been observed in maximum principal stress, S1, minimum principal stress, S3 and von Mises stresses, SEQV. In conclusion; since Von Mises stresses and especially max. compressive stresses (min. principal stress, S3) occurred at the lowest level for paper pulp I, paper pulp II, coated paper and Bristol papers, it has been decided that for increased durability of the knife the critical blade angle in terms of abrasion/breakage of the blade should be 28 degrees rather than the more widely used angle of 24°. A blade angle below 22 degrees is not advised.

paper; blade; stress; ANSYS;