The Flow Time of Operation

789 Ogledov
631 Prenosov
Izvoz citacije: ABNT
STARBEK, Marko ;GRUM, Janez ;KUŠAR, Janez .
The Flow Time of Operation. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 46, n.2, p. 66-67, july 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/the-flow-time-of-operation/>. Date accessed: 03 dec. 2020. 
doi:http://dx.doi.org/.
Starbek, M., Grum, J., & Kušar, J.
(2000).
The Flow Time of Operation.
Strojniški vestnik - Journal of Mechanical Engineering, 46(2), 66-67.
doi:http://dx.doi.org/
@article{.,
	author = {Marko  Starbek and Janez  Grum and Janez  Kušar},
	title = {The Flow Time of Operation},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {46},
	number = {2},
	year = {2000},
	keywords = {flow time; flow diagrams; operations; work contents; },
	abstract = {The flow time of operation (the shortest unit of flow time of an older) is the initial data for realistic production planning and iontrol. This time cannot be calculated - it can only be measured. Companies in Slovenia would like to reduce the flow time of operations (and thus reduce the flow time of orders) to improve their competitiveness in domestic and world markets. This paper presents the dffirence between one-dimensional, two-dimensional, and mean simple and weightedflow time of operation. Special attention has been paid to the measurement of the flow time of operation, and the construction of a corresponding flow-time diagram. The flow time of operation is not a constant value (it changes with time) and therefore this paper presents a procedure for operation flow-time control based on Deming's circle of continuous improvements. Presented are the results of the operation flow-time measurements and control in a company that produces machines for the chemical industry},
	issn = {0039-2480},	pages = {66-67},	doi = {},
	url = {https://www.sv-jme.eu/sl/article/the-flow-time-of-operation/}
}
Starbek, M.,Grum, J.,Kušar, J.
2000 July 46. The Flow Time of Operation. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 46:2
%A Starbek, Marko 
%A Grum, Janez 
%A Kušar, Janez 
%D 2000
%T The Flow Time of Operation
%B 2000
%9 flow time; flow diagrams; operations; work contents; 
%! The Flow Time of Operation
%K flow time; flow diagrams; operations; work contents; 
%X The flow time of operation (the shortest unit of flow time of an older) is the initial data for realistic production planning and iontrol. This time cannot be calculated - it can only be measured. Companies in Slovenia would like to reduce the flow time of operations (and thus reduce the flow time of orders) to improve their competitiveness in domestic and world markets. This paper presents the dffirence between one-dimensional, two-dimensional, and mean simple and weightedflow time of operation. Special attention has been paid to the measurement of the flow time of operation, and the construction of a corresponding flow-time diagram. The flow time of operation is not a constant value (it changes with time) and therefore this paper presents a procedure for operation flow-time control based on Deming's circle of continuous improvements. Presented are the results of the operation flow-time measurements and control in a company that produces machines for the chemical industry
%U https://www.sv-jme.eu/sl/article/the-flow-time-of-operation/
%0 Journal Article
%R 
%& 66
%P 2
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 46
%N 2
%@ 0039-2480
%8 2017-07-07
%7 2017-07-07
Starbek, Marko, Janez  Grum, & Janez  Kušar.
"The Flow Time of Operation." Strojniški vestnik - Journal of Mechanical Engineering [Online], 46.2 (2000): 66-67. Web.  03 Dec. 2020
TY  - JOUR
AU  - Starbek, Marko 
AU  - Grum, Janez 
AU  - Kušar, Janez 
PY  - 2000
TI  - The Flow Time of Operation
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - flow time; flow diagrams; operations; work contents; 
N2  - The flow time of operation (the shortest unit of flow time of an older) is the initial data for realistic production planning and iontrol. This time cannot be calculated - it can only be measured. Companies in Slovenia would like to reduce the flow time of operations (and thus reduce the flow time of orders) to improve their competitiveness in domestic and world markets. This paper presents the dffirence between one-dimensional, two-dimensional, and mean simple and weightedflow time of operation. Special attention has been paid to the measurement of the flow time of operation, and the construction of a corresponding flow-time diagram. The flow time of operation is not a constant value (it changes with time) and therefore this paper presents a procedure for operation flow-time control based on Deming's circle of continuous improvements. Presented are the results of the operation flow-time measurements and control in a company that produces machines for the chemical industry
UR  - https://www.sv-jme.eu/sl/article/the-flow-time-of-operation/
@article{{}{.},
	author = {Starbek, M., Grum, J., Kušar, J.},
	title = {The Flow Time of Operation},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {46},
	number = {2},
	year = {2000},
	doi = {},
	url = {https://www.sv-jme.eu/sl/article/the-flow-time-of-operation/}
}
TY  - JOUR
AU  - Starbek, Marko 
AU  - Grum, Janez 
AU  - Kušar, Janez 
PY  - 2017/07/07
TI  - The Flow Time of Operation
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 46, No 2 (2000): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - flow time, flow diagrams, operations, work contents, 
N2  - The flow time of operation (the shortest unit of flow time of an older) is the initial data for realistic production planning and iontrol. This time cannot be calculated - it can only be measured. Companies in Slovenia would like to reduce the flow time of operations (and thus reduce the flow time of orders) to improve their competitiveness in domestic and world markets. This paper presents the dffirence between one-dimensional, two-dimensional, and mean simple and weightedflow time of operation. Special attention has been paid to the measurement of the flow time of operation, and the construction of a corresponding flow-time diagram. The flow time of operation is not a constant value (it changes with time) and therefore this paper presents a procedure for operation flow-time control based on Deming's circle of continuous improvements. Presented are the results of the operation flow-time measurements and control in a company that produces machines for the chemical industry
UR  - https://www.sv-jme.eu/sl/article/the-flow-time-of-operation/
Starbek, Marko, Grum, Janez, AND Kušar, Janez.
"The Flow Time of Operation" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 46 Number 2 (07 July 2017)

Avtorji

Inštitucije

  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia
  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia
  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 46(2000)2, 66-67

The flow time of operation (the shortest unit of flow time of an older) is the initial data for realistic production planning and iontrol. This time cannot be calculated - it can only be measured. Companies in Slovenia would like to reduce the flow time of operations (and thus reduce the flow time of orders) to improve their competitiveness in domestic and world markets. This paper presents the dffirence between one-dimensional, two-dimensional, and mean simple and weightedflow time of operation. Special attention has been paid to the measurement of the flow time of operation, and the construction of a corresponding flow-time diagram. The flow time of operation is not a constant value (it changes with time) and therefore this paper presents a procedure for operation flow-time control based on Deming's circle of continuous improvements. Presented are the results of the operation flow-time measurements and control in a company that produces machines for the chemical industry

flow time; flow diagrams; operations; work contents;